Manual de instrucciones de Addonics Technologies PUDDESP

Resumen del contenido incluido en la página 1

T E C H N O L O G I E S
User Guide
Pocket UDD II
(PUDDEPU3 / PUDDESP / PUDDES
PPROEPU3 / PPROESP / PPROES)
www.addonics.com
v6.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/

Resumen del contenido incluido en la página 2

Front Back LED Flash Media Slot 5V Power Input eSATA Port Eject Button Any flash media below is compatible to use with the Pocket Ultra Digidrive II, using the optional Addonics CF DigiAdapter and 4-in-1 DigiAdapter or equivalent third party adapter. MD CF-I CF-II CF DigiAdapter MS SM SD MMC 4-in-1 DigiAdapter ATA Flash PCMCIA Hard Drive XD XD Memory Adapter Note: The Pocket UDD ii is not compatible with Wireless Broadband card, Panasonic P2 card, SRAM card and Linear Memory card. www.add

Resumen del contenido incluido en la página 3

Universal eSATAp Cable Hybrid eSATA Port (eSATAp) Standard eSATAp Cable eSATA Port Power Adapter or USB Power Cable Universal eSATAp Cable USB 3.0/2.0 Port eSATAp to USB 3.0 Adapter www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/

Resumen del contenido incluido en la página 4

Operation of the Pocket UDD II A. Pocket UDD II is connected via USB. 1. Insert the media fully into the device using PCMCIA adapters and your operating system will report new hardware detected and begin to install the device. This may take a few seconds before a new drive icon appears in the My Computer folder. During this initialization, the LED light on the Pocket UDD II toggles between red and green color; and will stay green once the computer recognizes the media. 2. Once the