Manual de instrucciones de Toshiba RAV-SM562AT-E

Manual de instrucciones del aparato Toshiba RAV-SM562AT-E

Aparato: Toshiba RAV-SM562AT-E
Categoría: Aparato de aire acondicionado
Fabricante: Toshiba
Tamaño: 4.29 MB
Fecha de añadido: 11/22/2014
Número de páginas: 36
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Toshiba RAV-SM562AT-E. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Toshiba RAV-SM562AT-E.

Para tu comodidad

Si ver los manuales de instrucción de Toshiba RAV-SM562AT-E directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Toshiba RAV-SM562AT-E en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Toshiba RAV-SM562AT-E a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Toshiba RAV-SM562AT-E Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Toshiba RAV-SM562AT-E, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Toshiba RAV-SM562AT-E. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

FILE NO. SVM-06012
SERVICE MANUAL
AIR-CONDITIONER
UNDER CEILING / CONSOLE TYPE
RAV-SM562XT-E / RAV-SM562AT-E
RAV-SM802XT-E / RAV-SM802AT-E
R410A
April, 2006

Resumen del contenido incluido en la página 2

FILE NO. SVM-06012 CONTENTS 1. SPECIFICATIONS............................................................................................................. 1 2. CONSTRUCTION VIEWS ................................................................................................. 3 3. SYSTEMATIC REFRIGERATING CYCLE DIAGRAM ...................................................... 4 4. WIRING DIAGRAM ........................................................................................................

Resumen del contenido incluido en la página 3

FILE NO. SVM-06012 1. SPECIFICATIONS 1-1. Indoor Unit (Flexi Type) Model Indoor unit RAV-SM562XT-E RAV-SM802XT-E Outdoor unit RAV-SM562AT-E RAV-SM802AT-E Cooling capacity (kW) 5.0 6.7 5.6 8.0 Heating capacity (kW) Power supply 1 phase 230V (220-240V) 50Hz 8.95-8.20 13.15-12.06 Running current (A) Cooling Electrical 1.87 2.72 Power consumption (kW) characteristics Power factor (%) 95 94 (W/W) 2.67 2.46 EER D E Energy efficiency class * 2.5 1.5 Energy rating * Heating Running current (A) 8.13-7.4

Resumen del contenido incluido en la página 4

FILE NO. SVM-06012  Operation characteristic curve 14 14 12 RAV-SM802XT-E RAV-SM802XT-E 12 10 10 8 8 6 6 RAV-SM562XT-E 4 RAV-SM562XT-E 4 • Conditions • Conditions Indoor : DB27˚C/WB19˚C Indoor : DB20˚C 2 Outdoor : DB35˚C Outdoor : DB7˚C/WB6˚C 2 Air flow : High Air flow : High Pipe length : 7.5m Pipe length : 7.5m 230V 230V 0 0 15 15 020 40 60 70 80 100 020 40 60 80 90 100 Compressor speed (rps) Compressor speed (rps)  Capacity variation ratio according to temperature

Resumen del contenido incluido en la página 5

FILE NO. SVM-06012 2. CONST RUCTION VIEWS 2-1. Indoor Unit Front panel 208 1093 Knock out system Grille air inlet Back body 200 Min 1093 For stud bolt Installation plate (Ø8 – Ø10) 1015 742 For stud bolt (Ø6) 450 Mount plate 20 20 M10 Suspention bolt 57 18 Wireless remote control Knock out system UNDER CEILING & CONSOLE INSTALLATION – 3 – Ø74 165 330 460 633 70 Min 633 160

Resumen del contenido incluido en la página 6

FILE NO. SVM-06012 3. SYSTEMATIC REFRIGERATING CYCLE DIAGRAM 3-1. RAV-SM562XT-E / RAV-SM802XT-E Indoor unit TCJ sensor Air heat exchanger TC sensor Refrigerant pipe Refrigerant pipe Outer diameter of refrigerant pipe Model at liquid side at gas side Outer dia. ∅B Outer dia. ∅A RAV-SM Gas side ÆA Liquid side ÆB 12.7 mm 6.4 mm 562XT-E Max 802XT-E 15.9 mm 9.5 mm 30m Packed valve Packed valve Outer dia. ∅B Outer dia. ∅A Outdoor unit Note : This Service Mamual describes explanation for the Und

Resumen del contenido incluido en la página 7

FILE NO. SVM-06012 4. WIRING DIAGRAM Indoor Unit HEAT EXCHANGER SWITCH PCB SENSOR MCC-1428B (TCJ) CN101 1 2 3 FOR FLOAT SWITCH 1 2 (OPTION) When you use float 1 2 switch you should cut J401 1 2 3 CN100 CN402 CN05 1 2 3 1 2 1 2 CN03 THERMO BLK J401 2 2 SENSOR WHI 10 10 10 10 BLK (TA) 1 1 BLU POWER 9 9 9 9 DC12V BLU BLK SUPPLY IC03 HEAT 8 8 8 8 2 2 4 DC5V BLU CIRCUIT BLK EXCHANGER 7 7 7 7 1 1 BLU SENSOR 6 6 6 6 CN01 BLU C02 (TC) 1 R506 5 5 5 5 BLU 4 4 4 4 DB01 BLU 3 3 3 3 BLU 2 2 2 2 CR502 BLU C

Resumen del contenido incluido en la página 8

FILE NO. SVM-06012 5. SPECIFICATION OF ELECTRICAL PARTS Indoor Unit No. Parts name Type Specifications 1 Fan motor (for indoor) AFP-220-50-4A Output (Rated) 50 W, 220 – 240 V 2 Grille motor MP35EA DC 12 V 3 Thermo. sensor (TA-sensor) 550 mm 10 kΩ at 25°C 4 Heat exchanger sensor (TC-sensor) ∅6 mm, 500 mm 10 kΩ at 25°C 5 Heat exchanger sensor (TCJ-sensor) ∅6 mm, 500 mm 10 kΩ at 25°C – 6 –

Resumen del contenido incluido en la página 9

FILE NO. SVM-06012 6. REFRIGERANT R410A This air conditioner adopts the new refrigerant HFC (5) After completion of installation work, check to (R410A) which does not damage the ozone layer. make sure that there is no refrigeration gas leakage. The working pressure of the new refrigerant R410A is If the refrigerant gas leaks into the room, coming 1.6 times higher than conventional refrigerant (R22). into contact with fire in the fan-driven heater, The refrigerating oil is also changed in accorda

Resumen del contenido incluido en la página 10

FILE NO. SVM-06012 Table 6-2-1 Thicknesses of annealed copper pipes Thickness (mm) Nominal diameter Outer diameter (mm) R410A R22 1/4 6.35 0.80 0.80 3/8 9.52 0.80 0.80 1/2 12.70 0.80 0.80 5/8 15.88 1.00 1.00 (2) Joints b) Socket joints For copper pipes, flare joints or socket joints are Socket joints are such that they are brazed for used. Prior to use, be sure to remove all connections, and used mainly for thick pipings contaminants. whose diameter is larger than 20 mm. Thicknesses of socket jo

Resumen del contenido incluido en la página 11

FILE NO. SVM-06012 Table 6-2-3 Dimensions related to flare processing for R410A A (mm) Outer Nominal Thickness diameter Conventional flare tool Flare tool for R410A diameter (mm) (mm) clutch type Clutch type Wing nut type 1/4 6.35 0.8 0 to 0.5 1.0 to 1.5 1.5 to 2.0 3/8 9.52 0.8 0 to 0.5 1.0 to 1.5 1.5 to 2.0 1/2 12.70 0.8 0 to 0.5 1.0 to 1.5 2.0 to 2.5 5/8 15.88 1.0 0 to 0.5 1.0 to 1.5 2.0 to 2.5 Table 6-2-4 Dimensions related to flare processing for R22 A (mm) Outer Nominal Thickness diameter C

Resumen del contenido incluido en la página 12

43° to 45° FILE NO. SVM-06012 Fig. 6-2-2 Relations between flare nut and flare seal surface (2) Flare connecting procedures and precautions When it is strong, the flare nut may crack and a) Make sure that the flare and union portions do may be made non-removable. When choosing not have any scar or dust, etc. the tightening torque, comply with values designated by manufacturers. Table 6-2-7 b) Correctly align the processed flare surface with shows reference values. the union axis. Note: c) Tighte

Resumen del contenido incluido en la página 13

FILE NO. SVM-06012 6-3. Tools 6-3-1. Required tools The service port diameter of packed valve of the outdoor unit in the air conditioner using R410A is changed to prevent mixing of other refrigerant. To reinforce the pressure-resisting strength, flare processing dimensions and opposite side dimension of flare nut (For ∅12.70 copper pipe) of the refrigerant piping are lengthened. The used refrigerating oil is changed, and mixing of oil may cause a trouble such as generation of sludge, clogging of

Resumen del contenido incluido en la página 14

FILE NO. SVM-06012 6-4. Recharging of Refrigerant When it is necessary to recharge refrigerant, charge the specified amount of new refrigerant according to the following steps. Recover the refrigerant, and check no refrigerant remains in the equipment. When the compound gauge’s pointer has indi- cated -0.1 Mpa (-76 cmHg), place the handle Low in the fully closed position, and turn off the Connect the charge hose to packed valve service vacuum pump’s power switch. port at the outdoor unit’s gas s

Resumen del contenido incluido en la página 15

FILE NO. SVM-06012 1 Be sure to make setting so that liquid can be charged. 2 When using a cylinder equipped with a siphon, liquid can be charged without turning it upside down. It is necessary for charging refrigerant under condition of liquid because R410A is mixed type of refrigerant. Accordingly, when charging refrigerant from the refrigerant cylinder to the equipment, charge it turning the cylinder upside down if cylinder is not equipped with siphon. [Cylinder with siphon] [Cylinder with si

Resumen del contenido incluido en la página 16

FILE NO. SVM-06012 (2) Characteristics required for flux 6-5-3. Brazing • Activated temperature of flux coincides with the As brazing work requires sophisticated techniques, brazing temperature. experiences based upon a theoretical knowledge, it • Due to a wide effective temperature range, flux must be performed by a person qualified. is hard to carbonize. In order to prevent the oxide film from occurring in the • It is easy to remove slag after brazing. pipe interior during brazing, it is effec

Resumen del contenido incluido en la página 17

FILE NO. SVM-06012 7. CONTROL BLOCK DIAGRAM Indoor Unit Control Panel M.C.U. 8 MHz Heat Exchanger Sensor (TCJ) Hi POWER Functions Display • Louver Control Heat Exchanger Sensor (TC) FILTER Sign • 3-minute Delay at Restart for Compressor Display Temperature Sensor • Motor Revolution Control PRE DEF. Infrared Rays Signal Receiver Sign Display • Processing (Temperature Processing) TIMER Initiallizing Circuit Display Infrared • Timer Rays OPERATION Clock Frequence Display Oscillator Circuit 36.7 kHz

Resumen del contenido incluido en la página 18

FILE NO. SVM-06012 8. OPERATION DESCRIPTION 8-1. When power supply is reset 8-3. Air volume control (1) Distinction of outdoor units (1) Operation with [HIGH (H)], [MED (M)], [LOW (L)], When the power supply is reset, the outdoors are or [AUTO] mode is performed by the command distinguished, and control is exchanged according from the remote control. to the distinguished result. (2) When [FAN] button is set to AUTO, the indoor fan (2) Setting of the indoor fan speed motor operates as shown in Fi

Resumen del contenido incluido en la página 19

FILE NO. SVM-06012 8-4. Cool air discharge preventive control In heating operation, the indoor heat exchanger °C Preset restricts revolving speed of the fan motor to prevent a 0 L −0.5 temp. cold draft. The upper limit of the revolving speed is −1 *1 shown in Fig. 8-4-1 and Table 8-4-1. −1.5 *2 −2 Manual + (One of M AUTO 46 34 5 steps) 45 33 −5.0 −5.5 *4 L−H H 33 21 [FAN AUTO] (Up to 32 20 setting 3 speed) SUL* NOTE : *2 A+4 A+4 SUL*1 *1, *2 : The values marked with *1 and *2 are A−8A−

Resumen del contenido incluido en la página 20

FILE NO. SVM-06012 8-5. Freeze preventive control (Low 8-7. Louver control temperature release) (1) Vertical air flow louver Position of veritcal air flow louver is automatically The cooling operation (including Dry operation) is controlled according to the operation mode. performed as follows based on the detected Besides, position of vertical air flow louver can be temperature of Tc sensor or Tcj sensor. arbitrarily set by pressing [FIX] button. When [J] zone is detected for T1 minutes (Follo


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Toshiba CARRIER RAS-15LAV-UL Manual de instrucciones Aparato de aire acondicionado 228
2 Toshiba CARRIER RAS-17LAV-UL Manual de instrucciones Aparato de aire acondicionado 25
3 Toshiba CARRIER RAS-17LKV-UL Manual de instrucciones Aparato de aire acondicionado 79
4 Toshiba CARRIER RAS-22LKV-UL Manual de instrucciones Aparato de aire acondicionado 53
5 Toshiba CARRIER RAV-SP180UT-UL Manual de instrucciones Aparato de aire acondicionado 29
6 Toshiba CARRIER RAS-15LKV-UL Manual de instrucciones Aparato de aire acondicionado 84
7 Toshiba CARRIER RAV-SP180CT-UL Manual de instrucciones Aparato de aire acondicionado 10
8 Toshiba CARRIER RAV-SP240CT-UL Manual de instrucciones Aparato de aire acondicionado 3
9 Toshiba CARRIER RAS-22LAV-UL Manual de instrucciones Aparato de aire acondicionado 4
10 Toshiba CARRIER RAV-SP180AT2-UL Manual de instrucciones Aparato de aire acondicionado 8
11 Toshiba CARRIER RAV-SP240AT2-UL Manual de instrucciones Aparato de aire acondicionado 11
12 Toshiba CARRIER RAV-SP300AT2-UL Manual de instrucciones Aparato de aire acondicionado 6
13 Toshiba CARRIER RAV-SP240UT-UL Manual de instrucciones Aparato de aire acondicionado 3
14 Toshiba CARRIER RAV-SP300CT-UL Manual de instrucciones Aparato de aire acondicionado 3
15 Toshiba CARRIER RAV-SP360AT2-UL Manual de instrucciones Aparato de aire acondicionado 3
16 Sony SU-PW2 Manual de instrucciones Aparato de aire acondicionado 12
17 Sony CV-P12PX Manual de instrucciones Aparato de aire acondicionado 3
18 Sony MULTI CHANNEL AV RECEIVER STR-DG710 Manual de instrucciones Aparato de aire acondicionado 31
19 Sony VGN-BX500 Manual de instrucciones Aparato de aire acondicionado 1
20 Philips 190S5 Manual de instrucciones Aparato de aire acondicionado 21