Manual de instrucciones de Cisco Systems AIR-CT2504-5-K9

Manual de instrucciones del aparato Cisco Systems AIR-CT2504-5-K9

Aparato: Cisco Systems AIR-CT2504-5-K9
Categoría: Equipamiento para ordenador
Fabricante: Cisco Systems
Tamaño: 3.86 MB
Fecha de añadido: 10/14/2013
Número de páginas: 56
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Cisco Systems AIR-CT2504-5-K9. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Cisco Systems AIR-CT2504-5-K9.

Para tu comodidad

Si ver los manuales de instrucción de Cisco Systems AIR-CT2504-5-K9 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Cisco Systems AIR-CT2504-5-K9 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Cisco Systems AIR-CT2504-5-K9 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Cisco Systems AIR-CT2504-5-K9 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 56 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Cisco Systems AIR-CT2504-5-K9, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Cisco Systems AIR-CT2504-5-K9. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

GETTING STARTED GUIDE
Cisco 2500 Series Wireless Controller
May 2011
Revised June 2, 2011
1 About This Guide
2 Unpacking and Preparing the Controller for Operation
3 Installing the Controller
4 Running the Bootup Script and Power-On Self Test
5 Logging into the Controller
6 Connecting to the Network
7 What’s New in Cisco Product Documentation
8 Translated Safety Warnings

Resumen del contenido incluido en la página 2

1 About This Guide This guide is designed to help you install and minimally configure your Cisco 2504 Wireless Controller (2504 controller), which is part of the Cisco 2500 Series Wireless Controllers. FCC Safety Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equ

Resumen del contenido incluido en la página 3

Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015 Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you

Resumen del contenido incluido en la página 4

Note Direct connection of access points to Cisco 2500 Series Wireless Controllers are not currently supported. The 2504 controller offers robust coverage with 802.11 a/b/g and delivers unprecedented reliability using 802.11n with Cisco Next-Generation Wireless Solutions and Cisco Enterprise Wireless Mesh. To best use this guide, you should have already designed the wireless topology of your network and have a working knowledge of how controllers function in a wireless LAN network. Figure 1 sh

Resumen del contenido incluido en la página 5

Figure 2 shows the front panel and location of the ports and light-emitting diodes (LEDs) for the 2504 controller. Table 1 describes the components of the front panel. Note It is expected that there will be small variations in LED color intensity and hue from unit to unit. This is within the normal range of the LED manufacturer’s specifications and is not a defect. Figure 2 Front Panel and LEDs CISCO 2500 Series WIRELESS CONTROLLER Model 2504 RESET CONSOLE 12 34 PWR SYS ALM RESET CONSOLE 1 2

Resumen del contenido incluido en la página 6

Callout Port and LEDs State and Description 1 GigE port and LED The Gigabit Ethernet port is an RJ-45 connector form-factor. This port is designed so that 1500 VAC rms isolation (per the 802.3 specification) is met between chassis ground and any 48V/Ethernet signal. LED description: � Green or Blinking Green—Link activity � Off—No link GigE port and LED The Gigabit Ethernet port is an RJ-45 connector 2 form-factor. This port is designed so that 1500 VAC rms isolation (per the 802.3 specif

Resumen del contenido incluido en la página 7

Callout Port and LEDs State and Description RESET Reset button Pushing the Reset button reboots the system. PWR Power LED The power LED light is on when all the power conversion circuits are running normally. LED description: � Green—Power is on � Off—No power to the system System LED The system LED determines if the system is powered up. SYS LED description: � Blinking Amber—Boot-loader is active and waiting for user input from the system console. � Blinking Green—Boot-loader or booting

Resumen del contenido incluido en la página 8

Note Wait at least 20 seconds before reconnecting an access point to the controller. Otherwise, the controller may fail to detect the device. Figure 3 shows the back panel and identifies its components. Table 2 describes the back panel components. Figure 3 Controller Back Panel and Components Cable Lock POWER 48VDC Slot Table 2 Controller Back Panel and Component Descriptions Ports and Slots State and Description POWER 48VDC The 48 V input power is provided via an external AC/DC adapter. Powe

Resumen del contenido incluido en la página 9

2 Unpacking and Preparing the Controller for Operation Follow these steps to unpack the 2504 controller and prepare it for operation: Step 1 Open the shipping container and carefully remove the contents. Step 2 Return all packing materials to the shipping container and save it. Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative. Pa

Resumen del contenido incluido en la página 10

� Local TFTP server (required for downloading operating system software updates). Cisco uses an integral TFTP server. This means that third-party TFTP servers cannot run on the same workstation as the Cisco WCS because Cisco WCS and third-party TFTP servers use the same communication port. Initial System Configuration Information Obtain the following initial configuration parameters from your wireless LAN or network administrator: � A system (controller name), such as controller. The syste

Resumen del contenido incluido en la página 11

� RADIUS server IP address, communications port, and secret if you are configuring a RADIUS server, such as 10.40.0.3, 1812, and mysecretcode. � The country code for this installation. Enter help to see a list or refer to the Cisco Wireless LAN Controller Configuration Guide for country code information. This guide is available at cisco.com. � Status of the 802.11a, 802.11b, 802.11g, or 802.11n networks, either enabled or disabled. � Status of Radio Resource Management (RRM), either enab

Resumen del contenido incluido en la página 12

� Mounting the Controller on a Wall (Rack-Mount Brackets) � Mounting the Controller on a Wall (Mounting Screws) � Mounting the Controller in a Rack Mounting the Controller on a Desktop or Shelf Before mounting the controller on a desktop or shelf, install the rubber feet located in accessory kit shipped with the controller. To install the rubber feet to the controller, follow these steps: Step 1 Locate the adhesive strip with the rubber feet in the mounting-kit envelope. Step 2 Remove the

Resumen del contenido incluido en la página 13

Step 3 Place the switch on the table or shelf near an AC power source. Note Allow 3 inches of space around the controller ventilation openings to prevent airflow restriction and overheating. Step 4 After the controller is mounted on a shelf or desk, perform the following tasks to complete the installation: � Connecting the Controller Console Port � Securing the Power Adapter Cable � Connecting to the Network Step 5 For configuration instructions about using the CLI setup program, see the “

Resumen del contenido incluido en la página 14

Figure 5 Installing the Rack-Mount Brackets to the Sides of the Controller 1 BASE MOUNT 1 #10-32 flat head screws (mounting screws for each side of the controller) 1 Step 2 Mount the 2504 controller on the wall with the front panel facing down, as shown Figure 6. For the best support of the controller and cables, make sure the controller is attached securely to wall studs or to a firmly attached plywood mounting backboard. 14 282083

Resumen del contenido incluido en la página 15

Figure 6 Mounting the Controller on the Wall 1 2 3 1 Front panel (facing down) 3 Wall mounting screws #10-32 flat head screws 2 Step 3 After the controller is mounted on the wall, perform the following tasks to complete the installation: � Connecting the Controller Console Port � Securing the Power Adapter Cable � Connecting to the Network Step 4 For configuration instructions about using the CLI setup program, see the “Running the Bootup Script and Power-On Self Test” section on page 23. M

Resumen del contenido incluido en la página 16

Warning Read the wall-mounting carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378 To mount the controller on a wall using mounting screws, follow these steps: Step 1 Mark the location of the mounting screws on the wall. Use the mount hole locations on the back of the controller for placement of the mounting screws (Figure 7). (The mount holes ar

Resumen del contenido incluido en la página 17

Step 4 Place the controller onto the mounting screws and slide it down until it lock into place, as shown in Figure 8. Note The front panel of the controller should be facing down. Figure 8 Place the Controller on the Mounting Screws 2 1 2 1 Front panel (facing down) 2 Mounting screws Step 5 After the controller is mounted ion the wall, perform the following tasks to complete the installation: � Connecting the Controller Console Port � Securing the Power Adapter Cable � Connecting to the N

Resumen del contenido incluido en la página 18

Step 6 For configuration instructions about using the CLI setup program, see the “Running the Bootup Script and Power-On Self Test” section on page 23. Mounting the Controller in a Rack To mount the 2504 controller in a 19-inch equipment rack, you can order an optional Optional Rack Mount kit (AIR-CT2504-RMNT). Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines

Resumen del contenido incluido en la página 19

Figure 9 Attaching the 19-Inch Brackets to the Side of the Controller. 1 RACK MOUNT 1 1 #10-32 flat head screws (mounting screws for each side of the controller) Step 2 After the brackets are attached to the sides of the controller, insert the controller into the 19-inch rack. Use either the 10-32 pan-head screws or the 12-24 slotted head screws to secure the controller in the rack, as shown in Figure 10. 19 282082

Resumen del contenido incluido en la página 20

Figure 10 Mounting the Controller in a 19-Inch Rack 1 #10-32 pan-head screws or #12-24 slotted head screws 1 Step 3 After the controller is mounted in the rack, perform the following tasks to complete the installation: � Connecting the Controller Console Port � Securing the Power Adapter Cable � Connecting to the Network Step 4 For configuration instructions about using the CLI setup program, see the “Running the Bootup Script and Power-On Self Test” section on page 23. 20 282086


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Cisco Systems 5545-X Manual de instrucciones Equipamiento para ordenador 0
2 Cisco Systems 5555-X Manual de instrucciones Equipamiento para ordenador 0
3 Cisco Systems C170 Manual de instrucciones Equipamiento para ordenador 6
4 Cisco Systems 5585-X Manual de instrucciones Equipamiento para ordenador 3
5 Cisco Systems 5525-X Manual de instrucciones Equipamiento para ordenador 1
6 Cisco Systems 1130AG Manual de instrucciones Equipamiento para ordenador 7
7 Cisco Systems 5512-X Manual de instrucciones Equipamiento para ordenador 0
8 Cisco Systems 8900 Manual de instrucciones Equipamiento para ordenador 0
9 Cisco Systems 2500 Manual de instrucciones Equipamiento para ordenador 10
10 Cisco Systems M170 Manual de instrucciones Equipamiento para ordenador 0
11 Cisco Systems 5580 Manual de instrucciones Equipamiento para ordenador 1
12 Cisco Systems ASA5585S60P60SK9 Manual de instrucciones Equipamiento para ordenador 0
13 Cisco Systems AVS 3120 Manual de instrucciones Equipamiento para ordenador 0
14 Cisco Systems Cisco Wave 694 Application Acceleration Appliance WAVE694K9 Manual de instrucciones Equipamiento para ordenador 2
15 Cisco Systems Cisco MGX 8800 Manual de instrucciones Equipamiento para ordenador 1
16 Sony MSAKIT-PC4A Manual de instrucciones Equipamiento para ordenador 2
17 Sony MRW62E-S1 2694866142 Manual de instrucciones Equipamiento para ordenador 5
18 Philips MATCH LINE 9596 Manual de instrucciones Equipamiento para ordenador 17
19 Sony 64GB SDHC Class 10 Memory Card Readers SF32UY Manual de instrucciones Equipamiento para ordenador 1
20 Philips PSC702 Manual de instrucciones Equipamiento para ordenador 1