Resumen del contenido incluido en la página 1
User’s Manual
For
GeForce4 MX Series
DOC NO: 54-ONV17-01 Rev.A
02/01/16
Resumen del contenido incluido en la página 2
FCC Requirement This device has been certified to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of the FCC Rules. See instructions if interference to radio reception is suspected. WARNING: This equipment generates and uses radio frequency energy and, if not installed or used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio or television recept
Resumen del contenido incluido en la página 3
Notice The information in this document is subject to change in order to improve reliability, design, or function without prior notice and does not represent a commitment on the part of this company. In no event will we be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or the inability to use the product or documentation, even if advised of the possibility of such damages. No part of this reference manual may be reproduced or t
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS 1. Introduction........................................................................................6 1.1 Features .................................................................................................................6 1.2 System Requirements............................................................................................7 2. Hardware Installation .......................................................................7 2.1 Adapter Configuration
Resumen del contenido incluido en la página 5
1. Introduction The nVIDIA GeForce4 MX series graphic is the 3D graphics processors and multimedia controller. Its innovative architectures combine, transform, and light technology with a rendering engine that delivers 4 pixels per clock. The nVIDIA GeForce4 MX series graphic not only speed up graphics processing for richer 3D graphics, it also frees up CPU bandwidth, to the computer systems use, by incorporating GeForce4 MX break-through 3D architecture. nVIDIA GeForce4 MX series gra
Resumen del contenido incluido en la página 6
1.2 System Requirements Any motherboard with AGP bus. (For AGP series product) □ Any motherboard with PCI bus. (For PCI series product) □ Microsoft Windows 98SE / ME / 2000 / XP. □ DirectX 8 series and OpenGL Features. □ 2. Hardware Installation 2.1 Adapter Configuration VGA with TV-Out 7
Resumen del contenido incluido en la página 7
S Video In Video Out S Video Out 8
Resumen del contenido incluido en la página 8
Low-Profile VGA with TV-Out Low-Profile VGA with TV-Out 9
Resumen del contenido incluido en la página 9
2.2 Installing your VGA adapter 1. Power off your computer, remove its outside cover, and then assert yourself by touching the power supply of your computer. Note: Before installing your new VGA card, you must first set the VGA option to either Standard VGA or Standard Display VGA. 2. Remove your old graphics card, and install your new VGA card into the AGP slot. PCI series product AGP series product AGP Slot PCI slot PCI slot AGP mainboard AGP mainboard 3. Ali
Resumen del contenido incluido en la página 10
3. Software Installation After installing the VGA card in your computer, please turn on your PC, and your computer will be automatically detected. Auto-Run CD will auto-detect your VGA and TV card devices. Therefore, it might show more than one device in the first installing window. Otherwise, Auto-Run CD will skip the first installing Notice : window when it only detects one device. Please select one installation of the devices that is proper for this product. 3.1 Installin
Resumen del contenido incluido en la página 11
3.3 View User's manual Click ‘User’s Manual’ to view detailed information regarding the various Drivers/Programs and FAQ located on the CD. 3.4 Installing driver on Windows 2000/XP Please set the VGA card as ‘Video Controller (VGA Compatible)’. When asked if you want to restart your PC, click ‘No’. Then you should follow the next step. 1. Insert the Auto-Run CD-ROM driver (wait few seconds). You will see ‘VGA Installer’ window that will be shown on the screen. If it doe
Resumen del contenido incluido en la página 12
3.5 TV-OUT Function Instructions Before you power on your system, you have to be sure the VGA NOTE: card is installed already and all the cables are connected to prevent form the card get burnt. 3.5.1 How to enable the TV-OUT function The VGA card needs to see real 75 ohms AV input. Connect the signal cable between TV-OUT of VGA and TV's Video input and Warning: turn on the TV before launch ‘Display Properties’. Otherwise the TV-OUT function would be gray and un-selectab
Resumen del contenido incluido en la página 13
3.5.2 How to change TV setting? 1. You can click ‘TV’ to switch VGA output to TV. A. Click ‘Change Format’ to select which standard TV you want. When you select ‘Make this format the power-up default’; the System will change BIOS default to the format, when you boot-up next time. B. Click ‘Video output format’ to select output from Composite or S-Video. C. Click ‘OK’ to switch your display mode. 14
Resumen del contenido incluido en la página 14
3.5.3 How to adjustment screen position? 1. Please open “Output Device” page. 2. When the output of your VGA is set to Monitor, You can click ‘Device Setting’ to adjust the screen position WARNING: The Monitor display may become scrambled if you adjust the screen position over the required range. 15
Resumen del contenido incluido en la página 15
3.5.4 How to change output to Digital Flat Panel? 1. A. You can click ‘Digital Flat Panel’ to switch VGA output to Digital Flat Panel. B. Click ‘OK’ or ‘Apply’ to switch your display device. 2. Click ‘OK’ to make sure. 3. Windows will ask you to keep this setting. Click ‘Yes’ to finish setting. Note : The function is just for output device with DVI connector. 16
Resumen del contenido incluido en la página 16
3.6 nView Function instructions 3.6.1 Clone mode 1. A. You can click ‘Clone’ to add second device Output of clone. B. Click ‘OK’ or ‘Apply’ to switch your display mode. 2. Windows 98SE will ask you to restart your computer. Please click ‘Yes’ to finish switching. 17
Resumen del contenido incluido en la página 17
4. Video Mirror Function 4.1.1 Video Mirror mode Video Mirror is a nView feature that allows a video or DVD application to mirror its playback in full-screen mode on any one of the connected display devices. For Video Mirror functionality, set your nView panel to one of these modes: •Windows XP/2000 Clone or Windows XP DualView. •Windows 9X/ME Clone or Extended Desktop. 1. Open the DVD or video application that you want to view. 2. A. Enable Overlay Controls B. Enab
Resumen del contenido incluido en la página 18
5. Color Correction Panel 5.1.1 Color Correction Settings If you are using a GeForceX GPU-based card, another non-nView nVIDIA GPU-based card, or have not enabled nView on your system yet, follow these steps: • Right click from the Windows desktop to display the context menu, click Properties, the Settings tab, and the Advanced button. • Click the Color Correction tab to display the nVIDIA Color Correction panel. If you are using a nView-based card, have nView enabled, a
Resumen del contenido incluido en la página 19
6. How to Overclock Increasing the hardware clock frequencies beyond the Warning: manufacturer’s recommended setting may cause system instability and possibly damage the hardware. 6.1.1 Setting Hardware Options Function 1. Choose ‘Hardware Options’ in ‘Additional Geforce 4 MX Properties’ then enable ‘Allow clock frequency adjustments’. 2. Please restart computer .To click ‘Restart Now’. 3. After restart computer, please set the clock of ‘Core clock fre
Resumen del contenido incluido en la página 20
7. Display Information 7.1 Resolutions Supported Resolutions Color Depth Refresh Rate (Hz) 60 70 72 75 85 100 120 140 144 150 170 200 240 8bit 640 x 480 60 70 72 75 85 100 120 140 144 150 170 200 240 16bit 60 70 72 75 85 100 120 140 144 150 170 200 240 32bit 60 70 72 75 85 100 120 140 144 150 170 200 240 8bit 800 X 600 16bit 60 70 72 75 85 100 120 140 144 150 170 200 240 60 70 72 75 85 100 120 140 144 150 170 200 240 32bit 60 70 72 75 85 100 120 140 144 150 170 200
