Resumen del contenido incluido en la página 1
VMA1891
18.1” TFT LCD COLOR
MONITOR
OWNER’S MANUAL
INSTALLATION GUIDE
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Introduction OWNERÕS MANUAL INTRODUCTION: The Clarion VMA1891 is a full-featured 18.1" TFT LCD Color Monitor. It can be used as: • A stand-alone monitor with a home PC or Laptop Computer. • A monitor integrated into a Clarion mobile multimedia system using auxiliary built-in Video Composite (RCA) or S-Video inputs. • A mobile PC monitor through the VGA input. ABOUT THE MANUAL AND WARRANTY: To start enjoying your new Clarion VMA1891, please read the instructions listed in this manual. Keep all
Resumen del contenido incluido en la página 4
VMA1891 18.1Ó TFT LCD Color Monitor • Do not disassemble or modify the set. Doing so may damage it and voids your warranty. • Keep drinks and drops from umbrellas away from the set. Water may damage the internal circuitry. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 30 – 113 degrees F.) • In ext
Resumen del contenido incluido en la página 5
Operation OWNERÕS MANUAL REAR CONTROLS AND CONNECTOR LOCATIONS: q VGA Input Connector y DC Input Connector +12Vdc w S-Video Input Connector u Power Switch 110Vac 50-60 Hz. e Composite Video Input i AC Input Connector 110Vac 50-60 Hz. r RS232 Port (Not Available) o L/R Audio Input Connectors t USB Input Connector OPERATION DESCRIPTIONS: When using this monitor in a 110Vac home environment. Plug the monitor into a 110Vac wall socket with the supplied AC power cable. Turn the rear AC Power switc
Resumen del contenido incluido en la página 6
VMA1891 18.1Ó TFT LCD Color Monitor OSD OPERATION DESCRIPTIONS: 1. Press the OSD Menu button 3 to display the on-screen menu. Press the UP2 or DN 1 button to scroll forward or backwards for each monitor settings. 2. Press the OSD Menu button 3 again to select the function. See list below for individual function operations. 96 OSD FUNCTIONS AND OPERATIONS: Icons Sub Menus Function Operation Intensity of white light. Use UP/DN buttons to increase or decrease Brightness None the level. Press
Resumen del contenido incluido en la página 7
OSD Functions OWNERÕS MANUAL OSD FUNCTIONS AND OPERATIONS: Icons Sub Menus Function Operation 1) All Auto Sets all functions Use UP/DN buttons to select the appropriate Auto 2) Auto Position Auto Screen Position Sub Menu. Press the OSD display button to Adjust 3) Auto Phase Auto Phase settings activate the automatic function. Select Exit, 4) Exit Exits and Auto Saves then press the OSD button to exit the function 1) RGB Input for PC Use UP/DN buttons to select the appropriate Input 2) Video (R
Resumen del contenido incluido en la página 8
VMA1891 18.1Ó TFT LCD Color Monitor 110 VAC HOME APPLICATION: Attaching a home VCR player. 1. Connect the L/R audio outputs of the VCR player to the R-AUDIO-L inputs. 2. Connect the video output to the Video input on the VMA1891. NOTE: Since there is only one set of L/R audio inputs on the VMA1891, additional components must route their audio signals through the VCR A/V inputs. This may limit the components attached to the VMA1891. Attaching a home computer or laptop. 1. Connect the computer
Resumen del contenido incluido en la página 9
12V Application OWNERÕS MANUAL NOTE: If there is no S-Video output on your DVD/CD player, connect its video output to the video input on the VMA1891. The S-Video output connection is preferred over the composite video output due to better signal quality. WIRING PRECAUTIONS (+12VDC OPERATION): Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. • Be sure to disconnect the car’s negative (-) battery terminal to prevent short circuits during
Resumen del contenido incluido en la página 10
VMA1891 18.1Ó TFT LCD Color Monitor 12VDC APPLICATIONS: (CONT) ABOUT INSTALLATION: Installation of mobile audio and video components requires experience with a variety of mechanical and electrical procedures. Even though this manual provides general application drawings for your new Clarion VMA1891, it does not show the exact installation methods necessary for your particular vehicle. If you do not have the required knowledge and experience to successfully complete the installation, we stron
Resumen del contenido incluido en la página 11
Specifications OWNERÕS MANUAL SPECIFICATIONS: Power Requirement: DC Application: +12 volts dc (9-16 volts dc) AC Application: 90-264 V, 50-60 Hz., 1.1-0.6 A Power Consumption: 60 watts, Power On (8-12 W Standby) 5 amps (5000 mA) Weight: 5.4 lb (12 kg) Dimensions: Panel Only: 17-11/16 x 15-3/16 x 3-5/16 in. (449 x 385 x 84 mm) With Stand 17-11/16 x 18-9/16 x 8-7/8 in. (449 x 470 x 225 mm) View Angle: Hor. +70°/-70° Ver. +70°/-40° Tilt Angle of Hinge 10° Forward 40° Backwards Audio Output 3W x
Resumen del contenido incluido en la página 12
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 16 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
