Resumen del contenido incluido en la página 1
Dell™ S1909W Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Solving Problems
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Informati
Resumen del contenido incluido en la página 2
Back to Contents Page About Your Monitor Dell™ S1909W Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality & Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship
Resumen del contenido incluido en la página 3
l Drivers and Documentation media l Quick Setup Guide l Safety Information Product Features The S1909W flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 18.5-inch (469.9 mm) viewable area display. ■ 1366 x 768 resolution, plus full-screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side to side. ■ Tilt adjustment
Resumen del contenido incluido en la página 4
Back view Label Description/Use VESA mounting holes (100mm) 1 To mount the monitor. (Behind attached base plate) 2 Barcode serial number label To contact Dell for technical support. 3 Security lock slot To help secure your monitor. 4 Dell Soundbar mounting brackets To attach the optional Dell Soundbar. 5 Regulatory rating label Lists the regulatory approvals. Side View Right side Left side Bottom View
Resumen del contenido incluido en la página 5
Bottom view Label Description 1 AC power cord connector 2 DVI connector 3 VGA connector Monitor Specifications Power Management Modes If you have VESA's DPMS™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode. If input from a keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table show
Resumen del contenido incluido en la página 6
Pin 15-pin Side of the Number Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DVI Connector Pin 24-pin Side of the Connected Signal Number Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test
Resumen del contenido incluido en la página 7
20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Flat Panel Specifications Screen type Active matrix - TFT LCD Screen dimensions 18.5 inches (18.5-inch viewable image size) Preset display area: Horizontal 409.8 mm (16.1 inches) Vertical 230.4 mm (9.1 inches) Pixel pitch 0.30 mm Viewing angle 160° (vertical) typical, 170° (horizontal) typical Luminance output 300 CD/m ²(typical) Contrast ratio 1000 to 1 (typical) Faceplate coating Antiglare with hard-coating 3H Backlight CCFL
Resumen del contenido incluido en la página 8
Electrical Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance Video input signals Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance Separate horizontal and vertical synchronizations, polarity-free Synchronization input signals TTL level, SOG (Composite SYNC on green) AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.) 120 V: 30 A (Max.) Inrush iso surge current 240 V: 60 A (Max.) Physical C
Resumen del contenido incluido en la página 9
256.08 BTU/hour (maximum) Thermal dissipation 119 BTU/hour (typical) Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required, the user can select different settings, but in most cases monitor installation is automatic. L
Resumen del contenido incluido en la página 10
Back to Contents Page Appendix Dell™ S1909W Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety Information that ships with your monitor. F
Resumen del contenido incluido en la página 11
Back to Contents Page Setting Up Your Monitor Dell™ S1909W Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1366x768 again. NOTE: If you are unable to set the resolution to 1366x768 , please contact Dell™ to inquire about a Graphics Ada
Resumen del contenido incluido en la página 12
Back to Contents Page Setting Up Your Monitor Dell™ S1909W Flat Panel Monitor If you have a non Dell™ desktop, portable computer, or graphics card 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http:/
Resumen del contenido incluido en la página 13
Back to Contents Page Operating the Monitor Dell™ S1909W Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt Using the Front Panel Use the control buttons on the side of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characterist
Resumen del contenido incluido en la página 14
or If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears. or 5 Use the power button to turn the monitor on and off. Power button The white light indicates that the monitor is on and fully functional. An amber light indicates power save mode. (with power light indicator) Using the On-Screen display (OSD) Menu NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu,
Resumen del contenido incluido en la página 15
NOTE: Auto Adjust is only available when you are using the analog (VGA) connector. 2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for a complete list of all the options available for the monitor. 3. Push the button once to activate the highlighted option. 4. Push and button to select the desired parameter. 5. Push to enter the slide bar and then use the and buttons, according
Resumen del contenido incluido en la página 16
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. NOTE: In most cases, Auto Adjust produces the best image for your configuration. This option is only available when you are using the analog (VGA) connector. Input Source The Input Source menu is to used to select between different video signals that may be connected to your monitor. Auto Select
Resumen del contenido incluido en la página 17
or NOTE: Image modes are different between the VGA/DVI-D and Video inputs Input Color Format Allows you to set the color format to: PC RGB-Suitable for normal PC graphics display over DVI HD YPbPr-Suitable for HD video playback over DVI. Mode Selection Allows you to set the display mode to Graphics or Video. If your computer is connected to your monitor, choose Graphics. If a DVD, STB, or VCR is connected to your monitor, choose Video. Preset modes VGA/DVI-D input Standard Mode su
Resumen del contenido incluido en la página 18
Nature Mode suitable for nature scenes. Hue This feature can make the video image color shift from green to purple. Use this feature to adjust the skin tone. Use or increases the green hue in the image increases the purple hue in the image NOTE: Hue adjustment is only available for video input. Saturation Allows you to adjust the color saturation of the video image. Use or button to adjust the saturation from '0' to '100' makes video image looks monochrome makes video image
Resumen del contenido incluido en la página 19
Sharpness This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100' . The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting Pixel Clock 'Image Settings'. Use the and buttons to adjust for best image quality. If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (f
Resumen del contenido incluido en la página 20
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take LCD Conditioning several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature does not remove burn-in. Reset all OSD settings to the factory preset values. Factory Reset Push to go back to or exit the main menu. Back OSD Warning Messages When the monitor does not support a particular
