Manual de instrucciones de Envision Peripherals LCD

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

English Nederlands Deutsch Français Italiano Español TABLE OF CONTENTS TABLE OF CONTENTS 1 CARING FOR YOUR LCD MONITOR 2 WALL MOUNTING 2 UNPACKING 3 CONNECTING 3 STARTUP 4 BASIC SETUP 4 IMAGE SETTINGS USING THE OSD MENU 5 OSD MENU FUNCTIONS 6 TROUBLESHOOTING 9 TECHNICAL SPECIFICATIONS 10 PRECAUTIONS The monitor may be damaged if placed too near a source of heat. Be aware of the location of

Resumen del contenido incluido en la página 3

CARING FOR YOUR LCD MONITOR First, unplug the power cord from the wall socket If the LCD screen is extremely dirty, clean it with a moist cloth. Use only warm water and then wipe the monitor dry. Solvents or harsh cleaners can damage the housing. Clean the display surface only with a soft cloth, otherwise you may damage the display’s coating If the monitor is only slightly dirty, clean it using a soft, dry and antistatic cloth. The LCD monitor’s screen surface is very sensi

Resumen del contenido incluido en la página 4

English Nederlands Deutsch Français Italiano Español UNPACKING Carefully lift the monitor out of the packaging and make sure that all components are included (see fig. 1). Save the original box and packing material in case you have to ship or transport the monitor. To set up the device, you must fit the monitor base together. Monitor 1 pc 1 pc 1 pc Figure 1 Signal Cable Power Cable User’s Manual Figure 1.LCD Monitor CONNECTING To connect the monitor to your PC 1. Make

Resumen del contenido incluido en la página 5

STARTUP 1. First start your PC and then turn on your monitor using the power switch (⑤ in fig. 4). The status indicator (⑥ in fig. 4) should light up blue. 2. Adjust the image to meet your requirements (see the following sections “Basic Setup” and “Image settings using the OSD menu”). 3. If there is no image displayed on the monitor, consult the section “Troubleshooting”. BASIC SETUP Automatic Image Adjustment You can adjust the image settings (such as brightness, contra

Resumen del contenido incluido en la página 6

English Nederlands Deutsch Français Italiano Español IMAGE SETTINGS USING THE OSD MENU The OSD menu is a window on your screen that allows you to view and change display settings. To change an OSD setting: Figure 4.Monitor features Press the SEL/MENU button ( ① in fig. 4) to display the OSD menu on the screen. 1. There are a total of 6 OSD submenus divided by categories. Select the desired submenu by pressing the OSD button SEL/MENU button ( ① in f

Resumen del contenido incluido en la página 7

OSD MENU FUNCTIONS Brightness/Contrast Controls the picture’s contrast, brightness, black level and auto level. Image Control Auto Adjustment: Automatically selects the optimal settings for image parameters (image position, phase, etc.) by using the button SEL/MENU ( ① in fig. 4). H. Position: Controls the picture’s horizontal position. V

Resumen del contenido incluido en la página 8

English Nederlands Deutsch Français Italiano Español Color Regulates the color temperature settings. Activate the OSD window using the SEL/MENU button. Go to the COLOR option by pressing the or buttons. Press the SEL/MENU button and or to select R, G or B. Then you can change the color values using the or buttons OSD Setup Language: English

Resumen del contenido incluido en la página 9

Advanced Input Select: Controls the selection of the input signal. The monitor allows you to make the following connections: analog graphics card via the 15-pin mini D-Sub interface. Resolution Notifier: There is an optional OSD window (On/Off) that displays the newly adjusted screen resolution settings including both horizontal and vertical frequencies. Factory recall: SELECT: Start EXIT: Back

Resumen del contenido incluido en la página 10

English Nederlands Deutsch Français Italiano Español TROUBLESHOOTING Blank Screen Power indicator is off Make sure the power cable and the power adapter are connected properly (see section “Connecting”). Make sure that the monitor was turned on using the power switch (see section “Startup”). Power indicator lights orange A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse. “Check signal c

Resumen del contenido incluido en la página 11

TECHNICAL SPECIFICATIONS LCD panel 19 wide diagonal size Contrast ratio 500:1 (typical) Viewing angle horizontal 140°, vertical 130° (typical) Response time 8ms (typical) Brightness 300 cd/㎡ (typical) Input signal Video: analog (D-SUB) Display colors 16.2 mill. Colors Synchronization 31~ 81 kHz horizontal, 56 ~ 75 Hz vertical Recommended 1440×900/60Hz Resolution Supported 640x480/60Hz; 640x480/67Hz; 640x480/73Hz; 640x480/75Hz; Resolutions 720x400/70