Resumen del contenido incluido en la página 1
MULTI DISPLAY
RD-30
Resumen del contenido incluido en la página 2
Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi Nishinomiy ya, Ja a, Jap pan an Tele Telep phone : hone : 0798-65-2111 0798-65-2111 fa fax x 0798-65-4200 0798-65-4200 :: F FIRST EDITION : IRST EDITION : MAR. MAR. 2001 2001 A All ri ll rig ghts reserved. hts reserved. Printed in Japan Printed in Japan H H :: MAR. MAR. 03,2004 03,2004 PUB.No. PUB.No. OME-44130 OME-44130 *00080917705* *00080917705* *00080917705* *00080917705* ( ( DAMI DAMI ) ) RD-30
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS WARNING CAUTION Do not open the equipment. Do not use the equipment for other than its intended purpose. Only qualified personnel should work inside the equipment. Improper use of the equipment can affect performance and void the warranty. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS 1.8 Resetting Indications to Zero ......... 1-22 FOREWORD ...........................................iii 1.9 Choosing Units of Measurement ... 1-23 SYSTEM CONFIGURATION ................... iv 1.10 Applying an Offset to Data............. 1-24 1.11 Choosing Time Display Format...... 1-25 1. OPERATION .....................................1-1 1.12 Choosing Position Data Format..... 1-26 1.1 Controls............................................ 1-1 1.13 Simulation Mode
Resumen del contenido incluido en la página 5
FOREWORD A Word to the Owner of the RD-30 Multi Display FURUNO Electric Company thanks you for purchasing the RD-30 Multi Display. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world. This dedication to excellence is furthered by our extensive global network of agents and dealers. Your Multi Display is d
Resumen del contenido incluido en la página 6
SYSTEM CONFIGURATION GPS RECEIVER GP-310B MULTI DISPLAY RD-30 FURUNO MENU ENT DISP DIM IEC 61162-1 * PWR (NMEA 0183) SENSOR IEC 61162-1 (NMEA 0183) NAV : Supplied EQUIPMENT : Option 12-24 VDC POWER Example of single display unit connection FURUNO IEC 61162-1 MENU ENT DISP DIM (NMEA 0183) SENSOR * PWR IEC 61162-1 (NMEA 0183) NAV EQUIPMENT FURUNO MENU ENT DISP DIM * PWR MULTI DISPLAY RD-30 FURUNO MENU ENT DISP DIM IEC 61162-1 * (NMEA 0183) SENSOR PWR IEC 61162-1 (NMEA 0183) : Su
Resumen del contenido incluido en la página 7
1. OPERATION This chapter covers operation of the equipment, from turning on and off the equipment to how to set up the various displays. 1.1 Controls Cursor pad: Shifts highlight cursor. MENU key: Opens/closes the menu. ENT key: Registers menu options. FURUNO MENU ENT DIM key: Adjusts key DISP DIM backlighting, display contrast. * PWR PWR switch: RD-30 Turns power on/off. key: Displays Rx data. * DISP key: Selects a display. RD-30 How to remove the cover Press here and pull towa
Resumen del contenido incluido en la página 8
1. OPERATION 1.2 Turning On/Off the Power Turning on: Press the [PWR] switch. Release it when you hear a beep. The screen shows the last-used display. Turning off: Press the [PWR] switch. Release it when the screen becomes blank. 1.3 Adjusting Key Panel Dimmer, Display Contrast 1. Press the [DIM] key to show the dimmer, contrast window. DIMMER (1~8) 4 CONTRAST (0~63) 45 EXIT:[ENT] Dimmer, contrast window 2. Press ▲ or ▼ to adjust key panel dimmer. 3. Press ◄ or ► to adjust display contra
Resumen del contenido incluido en la página 9
1. OPERATION 1.4 Selecting a Display The RD-30 has four display types, digital, graph, graphic (analog) and highway. The operator may arrange data for five displays and show them in the order desired. Availability of data depends on the sensors connected. Press the [DISP] key consecutively to select a display. Below is the default display sequence and default digital data items. [DISP] key DEPTH (FT) 210.2 [DISP] key TEMP (°F) 55.24 [DISP] key SOG (KT) 10.2 [DISP] key DEPTH 210.2 FT TE
Resumen del contenido incluido en la página 10
1. OPERATION 1.4.1 Sample displays Graph displays Water temperature, depth, speed over ground, speed through water, wind, current data and atmospheric pressure can be shown in graph form. DEPTH 90.2FT TEMP 51.94°F 60 0 150 50 40 300 (5 MIN ) (5 MIN ) Depth graph Water temperature graph STW 14.6KT SOG 14.6KT 30 30 15 15 0 0 (5 MIN ) (5 MIN ) Speed over ground graph Speed through water graph WIND 6.9KT CUR
Resumen del contenido incluido en la página 11
1. OPERATION Graphic displays The graphic display presents speed, temperature, wind, compass and current data in analog and digital formats. SOG: SPEEDOMETER1 or STW: SPEEDOMETER2 20 20 10 10 30 30 40 40 0 0 9.3 KT TEMP 39.10 °F 0 STW 0 60 60 Speedometer graphic display Water temperature graphic display CURRENT HDG 0 * = True bearing shown as "° NE SPD 30 30 E "; magnetic bearing as "°M". 60 N 60 SE 57.0° 3.6KT 90 90 SOG NW DIR S 120 120 150 150 W SW 180 10.2KT 57.2° * C
Resumen del contenido incluido en la página 12
1. OPERATION The highway display The highway display provides a graphic presentation of ship’s progress towards a destination, together with range and bearing to the destination, and ship’s course and speed. To choose this display, select HIGHWAY from the USER DISPLAY SETUP menu, referring to the procedure on page 1-8. Destination waypoint name Bearing from own ship to destination waypoint* Direction to steer (flashing) 0001 Appears on left or right side depending on direction to stee
Resumen del contenido incluido en la página 13
1. OPERATION Selecting the display range for the highway display You may select the display range for the highway display among 0.2, 0.4, 0.8, 1, 2, 4, 8 and 16 nautical miles. (Nautical miles is the default range unit; kilometer and statute mile are also available. See page 1-23.) 1. Press the [DISP] key to show the highway display and then press the [MENU] key to show the zoom window. ZOOM IN/OUT? Quit? PRESS [MENU] TO SEE THE MAIN MENU. Zoom window 2. Press the [ENT] key to show the zoom set
Resumen del contenido incluido en la página 14
1. OPERATION 1.5 Setting up the Displays Four display types are available: digital, graph, graphic, and highway. You may freely select and arrange what data to display in the digital, graph and graphic displays. The order in which displays are shown may also be changed. Note that the highway display cannot be adjusted. 1.5.1 Choosing display type 1. Press the [MENU] key once (twice when Highway display is shown) to open the main menu. MAIN MENU USER DISP SYS SETUP ALARM1 I/O SETUP
Resumen del contenido incluido en la página 15
1. OPERATION 1.5.2 Setting up digital displays 1. Select DIGITAL referring to paragraph 1.5.1. 2. Press the [ENT] key to show the digital display division options window. Digital display division options window 3. Select the display division desired, that is, the number of indications to show on a digital display, and then press the [ENT] key. : 1 indication : 2 indications : 3 indications : 4 indications 4. One of the following displays appears depending on the display division type you select
Resumen del contenido incluido en la página 16
1. OPERATION 5. Use the cursor pad to select “A” and then press the [ENT] key. The data available for display is shown. NONE WIND TIMER ODO POWER TEMP TRIP CUR DEPTH POSN PRE SOG STW TD A-TEMP HDG TIME HUM COG WPT NONE XTE ROT ETA Digital display options 6. Select data desired and then press the [ENT] key. (All data require appropriate sensors.) NONE: No display TEMP: Water temperature DEPTH: Depth SOG: Speed over ground STW: Speed through water HDG: Heading COG: Course over
Resumen del contenido incluido en la página 17
1. OPERATION TEMP DEPTH SOG STW WIND CURRENT PRESSURE Graph display options window 3. Choose the graph display option desired and then press the [ENT] key. One of the following graph display setup menus appears depending on your selection. GRAPH GRAPH < TEMP GRAPH SETUP > < DEPTH GRAPH SETUP > BASE POINT : + 50 F START FROM: + 0FT RANGE : 10 F MAX. RANGE : 300FT PERIOD : 5MIN PERIOD : 5MIN
Resumen del contenido incluido en la página 18
1. OPERATION 4. Use the cursor pad to select an item and then press the [ENT] key. The far-left digit is selected by the cursor in the case where you enter data, or a pop window appears with options. Enter and select data referring to the table below. To enter numeric data: Use ◄ or ► to select location and ▲ or ▼ to enter value and change from plus to minus and vice versa. For pop-up window: Use the cursor pad to select desired option. Graph setup menus Menu Item Description Settin
Resumen del contenido incluido en la página 19
1. OPERATION 1.5.4 Setting up graphic displays 1. Select GRAPHIC referring to paragraph 1.5.1. 2. Press the [ENT] key to show the graphic display options window. SPDMETER1 SPDMETER2 SPD(SOG) SPD(STW) TEMP WIND COMPASS CURRENT ROT RAI Graphic display options window 3. Select graphic display desired and then press the [ENT] key. For water temperature, speedometer1 or speedometer2 one of the following displays appears; go to step 4. For wind, compass, current or RAI no further operatio
Resumen del contenido incluido en la página 20
1. OPERATION 1.6 Displaying Rx Data Data currently being received can be shown by using the [*] key. Below is a sample Rx data display. [*] Key POSN 37°59.882'N 122°50.952'W TIME 01-FEB-04 00:05:37 SOG 12.6 KT STW 12.8 KT COG 56.0°*1 ROT 42°/MIN 1/4 [*] Key HDG 65.0°*1 TEMP 62.37°F DEPTH 123.5 FT WIND 65.0° (T)*2 8.1KT
