Resumen del contenido incluido en la página 1
HP LE1711 and LE1911 LCD Monitors
User Guide
Resumen del contenido incluido en la página 2
© 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use
Resumen del contenido incluido en la página 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Resumen del contenido incluido en la página 4
iv About This Guide
Resumen del contenido incluido en la página 5
Table of contents 1 Product Features HP LCD Monitors ................................................................................................................................. 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 3 Maintenance Guidelines ..............................................................................................................
Resumen del contenido incluido en la página 6
Identifying Monitor Conditions ............................................................................................................ 19 Sleep Timer Mode .............................................................................................................................. 20 HP Display LiteSaver ......................................................................................................................... 21 Installing the HP Display LiteSaver Software ...................
Resumen del contenido incluido en la página 7
Turkey EEE Regulation ..................................................................................................... 35 Appendix D LCD Monitor Quality and Pixel Policy vii
Resumen del contenido incluido en la página 8
viii
Resumen del contenido incluido en la página 9
1 Product Features HP LCD Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: LE1711 model, 43.2 cm (17-inch) diagonal viewable area display with 1280 x 1024 resolution, plus ● full-screen support for lower resolutions LE1911 model, 48.3 cm (19-inch) diagonal viewable area display with 1280 x 1024 resolution, plus ● full-screen support for lower resolutions ● Wide viewing angle to allow viewing from
Resumen del contenido incluido en la página 10
Intelligent Management AssetControl ● Compliant with the following regulated specifications: ● ◦ European Union CE Directives ◦ Swedish TCO Requirements 2 Chapter 1 Product Features
Resumen del contenido incluido en la página 11
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 32 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
Resumen del contenido incluido en la página 12
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
Resumen del contenido incluido en la página 13
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. Attaching the Monitor Base 1. Set the base on a flat surface such as a table top. 2. Using both hands, position the pedestal over the base and press down firmly to lock it in place. Be sure the base is securely locked in place and adjust the tilt angle to the desired position. CAUTION: Do not touch the surface of the
Resumen del contenido incluido en la página 14
Rear Components Figure 3-2 Rear Components Component Function 1 AC Power Connector Connects the AC power cord to the monitor. 2 VGA Connector Connects the VGA cable to the monitor. Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. NOTE: You can route the cables through the cable management feature on the back of the monitor's stand, if desired. 2. Connect one end of the VGA signal cable to the VGA connector on the monitor and connect the oth
Resumen del contenido incluido en la página 15
WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplugging the power cord from the electrical outlet. For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over t
Resumen del contenido incluido en la página 16
When the monitor is powered on, a Monitor Status message is displayed for five seconds. The message shows the current active input signal, the current preset display resolution, and the recommended preset display resolution. Using the Accessory Rails The monitor features accessory rails on the rear that can be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional device for detailed mounting instructions. Figure 3-
Resumen del contenido incluido en la página 17
3. Remove the three screws on the back of the monitor that connect the monitor panel to the pedestal base (1) and slide the pedestal base from the monitor panel (2). Figure 3-6 Removing the Pedestal Base 4. To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm plate and into the mounting holes on the monitor. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4
Resumen del contenido incluido en la página 18
Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor. Figure 3-8 Locating the Rating Labels Installing a Cable Lock You can secure the monitor to a fixed object with an optional cable lock available from HP. NOTE: For more information on HP accessories, go to http://www.hp.com/go/options. 10
Resumen del contenido incluido en la página 19
4 Operating the Monitor Software and Utilities The CD that comes with the monitor contains files you can install on the computer: ● an .INF (Information) file ● an .ICM (Image Color Matching) file ● auto-adjustment pattern utility additional software for the monitor model ● NOTE: If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP monitors support Web site. See Downloading from the Worldwide Web on page 12 in this chapter. The Information File The .INF fil
Resumen del contenido incluido en la página 20
Installing the .INF and .ICM Files After you determine that you need to update, you can install the .INF and .ICM files from the CD or download them. Installing from the CD To install the .INF and .ICM files on the computer from the CD: 1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed. 2. View the Monitor Driver Software Readme file. 3. Select Install Monitor Driver Software. 4. Follow the on-screen instructions. 5. Ensure that the proper resolution and refresh rates appea
