Resumen del contenido incluido en la página 1
Operating
Instructions
Multi-Format Monitor
Model BT-H1700AE
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF
MUTING SLOT 1 SLOT 2 SLOT 3 POWER
A B C D E F
VOLUME MENU BLUE ASPECT AREA INPUT SELECT
CHECK MARKER
BEDIENUNGSANLEITUNG : MULTI-SYSTEM-MONITOR
MANUEL D’INSTRUCTIONS : MONITEUR MULTI-FORMAT
MANUALE DI ISTRUZIONI : MONITOR MULTI-FORMATI
INSTRUCCIONES : MONITOR MULTIFORMATO
Before attempting to connect, operate or adjust this product, please read these instructions completely.
LCT1261-001A (EN) 1
Resumen del contenido incluido en la página 2
LCT1261-001A (EN) 2 02.6.25, 12:25 PM
Resumen del contenido incluido en la página 3
OPERATING INSTRUCTIONS MULTI-FORMAT MONITOR BT-H1700AE Thank you for purchasing this Panasonic multi-format monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. : BT-H1700AE Serial No. : CONTENTS SAFETY PRECAUTIONS .....................................................................
Resumen del contenido incluido en la página 4
SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation WARNING : THIS APPARATUS or mishandling the monitor, be fully aware of all the following precautions. MUST BE EARTHED. WARNINGS To prevent fire or shock hazard, do not expose this Improper operations, in particular alternation of high monitor to rain or moisture. Dangerous high voltages voltage or changing the type of tube may result in x-ray are present inside the unit. Do not remove the back emission of consider
Resumen del contenido incluido en la página 5
For Your Safety Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for U.K. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. FOR CONTINENTAL EUROPE, ETC. FOR U.K. ONLY Not to be used in the U.K. If the plug supplied is not suitable for your socket outlet, it should be cut off and approp
Resumen del contenido incluido en la página 6
! CONTROLS AND FEATURES FRONT VIEW 1 2 3 4 5 7 8 11 12 13 14 18 19 20 21 22 23 24 25 UNDER PULSE COLOR MUTING DEGAUSS SCAN CROSS OFF POWER SLOT 1 SLOT 2 SLOT 3 A B C D E F MENU SCREENS ASPECT AREA INPUT SELECT VOLUME CHECK MARKER UNDER PULSE COLOR DEGAUSS SCAN CROSS OFF SLOT 1 SLOT 2 SLOT 3 POWER A B C D E F MENU BLUE ASPECT AREA INPUT SELECT VOLUME CHECK MARKER 6 9 10 15 16 17 1 Tally lamp EMBEDDED AUDIO channel switch button 8 Lights when the tally control signal is ON. Set the M
Resumen del contenido incluido en la página 7
REAR/SIDE VIEW REMOTE MAKE RS-232C 26 27 30 28 MAIN POWER 29 Refer to pages 6 and 7 for correspondence between the 14 COLOR OFF button/lamp input terminals and the INPUT SELECT buttons. Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF 24 Power lamp button is pressed while lit, the light goes off and the Unlit : The main power is OFF. normal screen is restored. Orange : The main power is ON, but the monitor’s power Use t
Resumen del contenido incluido en la página 8
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) VIDEO INPUT CARD (OPTIONAL: BT-YA701P) 1 Video input/output terminals Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. VIDEO 1 (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select VIDEO 1 : press INPUT SELECT A/C/E button IN OUT VIDEO 2 1 Select VIDEO 2 : press INPUT SELECT B/D/F button 2 S-video input terminal IN OUT Input terminal for the S-vid
Resumen del contenido incluido en la página 9
SDI INPUT CARD (OPTIONAL: BT-YA703P) 1 Output terminal for a selected component serial digital signal Output terminal for a selected digital signal (the input SWITCHED OUT displayed on the screen). The output signal is cable- compensated. 1 NOTE: When the monitor’s power is OFF, no digital signal is output. IN SDI 1 Input terminals for component serial digital 2 2 signals IN SDI 2 4 Input terminals for the digital signal. Select SDI 1 : press INPUT SELECT A/C/E button Select SDI 2 : press INPU
Resumen del contenido incluido en la página 10
PREPARATION INSTALLING THE INPUT ATTACHING THE WIDE CARD MASK Optional input cards are necessary to use the functions of this A wide mask is provided with the monitor. This changes the monitor. Before mounting the monitor or connecting other viewable screen area to the 16:9 aspect ratio. equipment to the monitor, be sure to install the input cards. The wide mask cannot be attached to the monitor after the monitor is mounted in a rack. Mount the wide mask before 1. Turn off the Multi-Format M
Resumen del contenido incluido en la página 11
ATTACHING THE POWER CORD HOLDER The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet. The Power Cord Holder consists of two parts; a case and cover. 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided). Caution: Use only the provided screws. 2 Attach the Power Cord Holder cover to the AC power cord. Press the cover until it clicks. 3. Connect the AC power cord to the AC inlet, and join the Po
Resumen del contenido incluido en la página 12
BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ABOUT MENU SCREENS BASIC MENU OPERATION ● To select an item, This monitor features a MAIN MENU (main menu screen) and Press the or buttons to move the cursor (4) on the a SETUP MENU (setup menu screen). Menu Screens and select the desired item. The MAIN MENU contains the functions normally used, and ● To set (select) or adjust an item, the SETUP MENU contains the settings required for initial Press the or buttons to select or adjust the desir
Resumen del contenido incluido en la página 13
HOW TO USE “MAIN MENU” “MAIN MENU” ITEMS The following items appear in MAIN MENU. Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. 3 sub menu POSITION Selects the display position of the sub menu superimposed on the screen. 4 AREA MARKER Selects the size marker for the other screen ratio used when the screen *2 ratio is 16:9. 5 AR
Resumen del contenido incluido en la página 14
HOW TO USE “MAIN MENU” (cont'd) ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS HD SDI 1 or HD SDI 2 shows the HD SDI input card is 1. APERTURE CONTROL installed. Compensates the frequency HD SDI 1 and HD SDI 2 show the HD SDI input card * * characteristics of the input LEVEL : 00 (compatible with EMBEDDED AUDIO) is installed. video signal. Press the CONTROL FREQ. :HIGH sub menu ● NO SLOT shows no input cards are installed. reset button to display the setting
Resumen del contenido incluido en la página 15
5. AREA MARKER-R R-Y PHASE 90 Items : Selects the size marker for the other screen ratio R/B GAIN 0.79 (aspect) used when the screen ratio is 16:9. (for ITU601 external control) G-Y PHASE 244 Settings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2 G/B GAIN 0.45 Functions : OFF: The marker is not displayed. 16:9/4:3/13:9/14:9: Displays the marker (a white R-Y PHASE 90 quadrangle) showing the screen size of each R/B GAIN 0.86 aspect ratio. ITU709 MODE 1/MODE 2: Displays no markers because G-Y PHASE 244 th
Resumen del contenido incluido en la página 16
HOW TO USE “SETUP MENU” “SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance. 4 SIZE/POSI. ADJ. Adjusts the size or position of the picture. 5 DISTORTION ADJ. Compensates the picture distortion. 6 STATUS DISPLAY Makes the status of the input signal appear or disap
Resumen del contenido incluido en la página 17
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Item : REMOTE SYSTEM Selects the colour system and Settings : MAKE/TRIGGER COLOR SYSTEM :AUTO displays the monitor’s power- SYNC SELECT :INT. Function : Selects the contact system (MAKE (make RUSH DELAY TIME :STD. up time or the total usage time. TALLY SELECT :GREEN contact) or TRG. (trigger contact)) for the MAKE/ REMOTE SYSTEM :MAKE EMBEDDED :1G Press the button to dis
Resumen del contenido incluido en la página 18
HOW TO USE “SETUP MENU” (cont'd) 3. COLOR TEMP./BAL. Item : CONTRAST Sets or adjusts the colour Adjustment temperature or white balance. range : –20 ~ 00 ~ +20 COLOR TEMP. :LOW Press the button to display BLUE DRIVE : 000 Function : For approximate adjustment of the picture RED DRIVE : 000 the setting menu illustrated on GREEN CUTOFF : 000 contrast. Before adjustment, turn the CON- BLUE CUTOFF : 000 the right. RED CUTOFF : 000 TRAST knob
Resumen del contenido incluido en la página 19
4. SIZE/POSI. ADJ. 5. DISTORTION ADJ. Adjusts the size or position of Compensates the picture the picture. Press the distortion. Press the button H.SIZE : 00 PINCUSHION : 00 button to display the setting to display the setting menu H.POSITION : 00 PIN.BALANCE : 00 V.SIZE : 00 PARALLELOGRAM : 00 menu illustrated on the right. illustrated on the right. V.POSITION : 00 TRAPEZOID : 00 sub menu ROTATION
Resumen del contenido incluido en la página 20
HOW TO USE “SETUP MENU” (cont'd) 6. STATUS DISPLAY 7. CONTROL LOCK Makes the status of the input Item : CONTROL LOCK signal appear or disappear on Settings : OFF/ON STATUS DISPLAY :ON the screen. Press the Function : Invalidates most of operations on the front panel 1080/1035 :1080 button to display the setting (including menu screen operations). menu illustrated on the right. OFF : Enables normal operations. ON : Invalidates all operations except the power EXIT:
