Resumen del contenido incluido en la página 1
X7G-NagaV
User’s Manual
Resumen del contenido incluido en la página 2
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonab
Resumen del contenido incluido en la página 3
The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE mark for Class B ITE (Following European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio int
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS TABLE OF CONTENTS ..........................................................................................III Your New LCD Monitor 1 Unpacking 1 Identifying Components 3 Adjusting the Tilting Angle 5 Connecting AC Power and Video Cable 6 Power Management System 6 The LCD Monitor’s Control Panel 7 Adjusting the Monitor’s Display 8 TFT LCD Monitor Specifications 14 Supported Timing 16 Troubleshooti
Resumen del contenido incluido en la página 5
The LCD Monitor Your New LCD Monitor Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x400 VGA to 1280x1024 SXGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters, and the LCD Monitor’s small footprint gives you more room in your workspace for other peripherals. Lightweight and compact, the LCD Monitor is the perfect solution
Resumen del contenido incluido en la página 6
After unpacking your LCD monitor, make sure the following items are included in the box and are in good condition: • LCD monitor • Power Cord • Monitor-To-PC Analog signal cable 15pin • User’s manual If you find that any item to be missing or appear to be damaged, contact your dealer immediately. Do not throw away the packing material or shipping carton in case you need to ship or store the LCD monitor in the future. 2
Resumen del contenido incluido en la página 7
Identifying Components A. The LCD Monitor — Front View 3 1 4 2 Figure 1-1: The LCD Monitor Front View 1. Power-On Indicator This Circular LED indicator green lit when the power is on and orange lit when the LCD monitor is in power-saving mode. 2. Monitor Stand 3. LCD Screen The LCD monitor screen is a 17-inch TFT 1280 x 1024 screen. 4. LCD Monitor Control Panel Refer to Chapter 2 for more details. 3 Rev.1
Resumen del contenido incluido en la página 8
B. "Hot Keys" for Quick Adjustment of Monitor Settings + P Figure 1-2: "Hot Keys" 1. Brightness Adjustment "hot key": Brightness Press this + button to allow you to adjust the brightness of the LCD 50 Monitor directly 2. Contrast Adjustment “ Hot key” Contrast Press this - button to allow you to adjust the contrast of the LCD Monitor directly 50 3
Resumen del contenido incluido en la página 9
Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 °. 0 to 10 10 Figure 1-3: Tilting the Monitor 5 Rev.1
Resumen del contenido incluido en la página 10
Connecting AC Power and Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. AC-IN Monitor AC Outlet Power Cord (Wall Socket) Computer Power Cord VGA Figure 1-4: The AC Adapter Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator from green lit c
Resumen del contenido incluido en la página 11
The Display Controls The LCD Monitor’s Control Panel + P Figure 2-1: The Control Panel 1. : Enable the OSD Menu button or / Move the cursor to the left ( when OSD is enabled) 2. : Move the cursor to the Right ( When OSD is enabled) / Auto-adjustment hot key 3. - : Enter into the sub-menu or decrease the value / Contrast hot key 4. + : Enter into the sub-menu or increase the value / Brightenss hot key 5. :Power Switch This button lets
Resumen del contenido incluido en la página 12
Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the button causes the screen below to appear. 2. Use the & key to select the desired group, then press – or + key to enter into sub-menu 3. Repeat step 2 to select the changed item, then – or + to change the value. Main Menu Sub Menu Monitor Control Description OSD Main SCREEN 8
Resumen del contenido incluido en la página 13
Monitro Adjustment Allow you to adjust the LCD monitor’s display settings. Press the Adjustment control button to display the submenu. Use the Function Select button to select one of the following submenu options: Auto Adjustment (For VGA port only, DVI port can’t adjustment) Press the Adjustment control button to let the monitor determine and select the setting that is most appropriate for your system requirements. H-POSITION: (For VGA port only, DVI port can’t adjustment) To mov
Resumen del contenido incluido en la página 14
To exits the Monitor-Control submenu OSD-control The OSD-Control menu lets you adjust the position of the OSD on the screen. Press the Adjustment control button to display the submenu. OSD-H-POSITION: To change the position of the OSD on a horizontal plane. OSD-V-POSITION: To change the position of the OSD on a vertical plane. OSD-TIMER: The OSD menu display time can be set at 5, 10, 15, 20, 25 or 30 seconds. EXIT: To exi
Resumen del contenido incluido en la página 15
COLOR: To select the LCD monitor’s color display. The available options are cold, warm and User. Selecting the user option lets you make individual adjustments to the R, G and B items. COLOR R, G and B ADJUST: To make individual adjustments to the Red, Blue, Green (RGB) gain for the color temperature. AUTO LEVEL: To adjust automatically the white balance display. RESET: To reset all of the Graphic-Control submenu settings to the factory default. EXIT: To ex
Resumen del contenido incluido en la página 16
To indicate display mode timings and firmware version. EXIT: To exit the Misc-Control submenu. EXIT: Use the OSD Exit item to close the OSD menu. The OSD will disappear by itself if left inactive. 12 Rev.1
Resumen del contenido incluido en la página 17
Note: 1) No video No Video When the monitor is ON and there is no video signal received, the following message will be displayed 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 85HZ) the display will show the following message Over Range 13 Rev.1
Resumen del contenido incluido en la página 18
Appendix A TFT LCD Monitor Specifications LCD Panel 17" SXGA Control Software Power switch with LED indicator Functions (ON/OFF) Power On-Screen Main Menu Submenu Display MONITOR- Auto Adjustment, H-POSITION, (OSD) CONTROL V- POSITION, PHASE, CLOCK, GRAPHIC/TEXT, RESET, EXIT OSD-CONTROL OSD-H-POSITION, OSD-V- POSITION, OSD-TIMER, EXIT MISC-CONTROL LANGUAGE, INFORMATION, EXIT GRAPHIC- CONTRAST, BRIGHTNESS, COLOR, CONTROL COLOR R, G and B ADJUST, AUTO LEVEL, RESET, E
Resumen del contenido incluido en la página 19
Scanning Frequency 24-80K H/V, Hz 50-75 Power Management Meets VESA DPMS Power Consumption 35W/1W Max. (ON/OFF, W) Dimensions 14.74 x 15.10 x 6.81 in. WxHxD (374.5 x 383.45 x 173mm) Net Weight 9.46 lbs (approx.) (4.3 Kg) Power Supply Universal Input AC Socket Environment Operating Temperature: 32 to 104°F (0 to 40° C) Relative Humidity: 10% to 90% Regulatory FCC B DoC,UL/cUL,Energy star 15
Resumen del contenido incluido en la página 20
Appendix B Supported Timing Vertical Horizontal Item Standards Resolution Dot Clock Scanning Scanning (MHz) Frequency Frequency (Hz) (kHz) 1 NEC PC98 640x400 21.05 56.42 24.83 2 MAC 13" mode 640x480 30.24 66.67 35.00 3 MAC 16" mode 832x624 57.28 74.55 49.73 4 MAC 17" mode 1024x768 80.00 75.02 60.24 5 VGA 640x350 25.18 70.09 31.47 6 VGA 640x400 25.18 70.09 31.47 7 VGA 640x480 25.18 59.94 31.47 8 VESA 640x480 31.50 72.81 37.86 9 VESA 640x480 31.50 75.00 37.50 10 VESA 800x600 3
