Resumen del contenido incluido en la página 14
10. Windows setup For the best view, please set the monitor type in Windows. Please select as follows : Control Panel > Monitor > Setting > Advance > Monitor > Change > Show all List …> Stand > For 1024 ×768, please set to “ XGA 1024 × 768 @ 60Hz ” 14
Resumen del contenido incluido en la página 15
11. Trouble Shooting 1) Power on but no picture → Make sure the VGA cable is tightly connected from the video output connector on the video card to the video input connector on the monitor. → Make sure you are using the standard power adapter coming with the monitor. → Check your video card if the driver is correctly installed. If there is no video signal from the video card, “ NO INPUT SIGNAL ” will show on the screen. 2) Wrong or abnormal colors → If any color (red, green, or blue)
Resumen del contenido incluido en la página 16
6) Residue image → If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave a residue image. It is characteristic of liquid crystal and is not malfunction or deterioration of the liquid crystal. The residue image will disappear after a period of time. It is recommended to set up the screen saver for your LCD monitor. 16
Resumen del contenido incluido en la página 1
14 ” TFT-LCD MONITOR
V141 Series
USER ’ S MANUAL
www.viewera.com
Rev 1.0
1
Resumen del contenido incluido en la página 2
CONTENTS 1. Introduction Page 3 Product Description ....................................................... Page 3 Package Contents .......................................................... Page 3 Product Features …....................................................... Page 3 Screen Cleaning Techniques ......................................... Page 4 Additional ..................................................................... Page 4 2. Control Functions Page 6 Function Select
Resumen del contenido incluido en la página 3
1. Introduction Product Description Congratulations on your purchase of the ViewEra V141 series LCD monitor. It incorporates high quality display into a small light-weighted module. It has power-saving capabilities and emits no radiation. You will certainly benefit from this monitor in lots of ways; to name some of them: comfort, safety, space-saving and environmental protection. This LCD monitor incorporates 14 ” color active matrix thin-film-transistor (TFT) liquid crystal display to
Resumen del contenido incluido en la página 4
Screen Cleaning Techniques 1. Gently clean the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth, to remove dust and other particles that can scratch the screen. 2. Do not apply pressure to the screen surface when wiping it clean. 3. Do not pour or spray any liquid directly onto the screen or casing. Chemical cleaners have been reported to damage the screen or case of the LCD monitor. Additional Read all of these instructions and save them for later use.
Resumen del contenido incluido en la página 5
If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician. If the product exhibits a distinct change in performance, service may be required. 4. Power and extension cords Do not allow anything to rest on the power cord. Do not locate this product where p
Resumen del contenido incluido en la página 6
2. Control Functions The monitor digital control functions are located on the front panel. They are shown in the figure below and described in the following paragraphs. 1. Power switch with indicator LED 2. Function Keys Function Selection 1. Press the “ 1 ” knob to show the OSD menu. Then use the “ △ ” and “ ▽ ” knobs to select a function. Press the “ 2 ” knob to close the OSD menu. 2. With the “ △ ” and “ ▽ ” knobs, you can adjust the speaker volume on the monitor. When you
Resumen del contenido incluido en la página 7
2. Video Brightness - Adjust the luminance level of the image. Contrast - Adjust the contrast level of the image. Black Level - Adjust the black Level of the image. Exit - Close the Video OSD menu. 3. Audio Volume - Adjust the speaker volume Balance - Adjust the speaker volume to right side or left side. Exit - Exit the Audio OSD menu. 4. Color Color Temperature User - Adjust the R.G.B. gain level. 6500K - Select color temperature of 6500°K. 930
Resumen del contenido incluido en la página 8
6. Language - Set the language of the OSD windows. 7. Tools OSD Control OSD Timer - Setting the OSD menu display time. OSD H. Position - Adjust the horizontal position of the OSD menu. OSD V. Position - Adjust the vertical position of the OSD menu. Exit - Close the OSD Control OSD menu. Recall - Recall the factory default setting. Sharpness - Adjust the picture more clearly. Exit - Close the Tools OSD menu. 8. Exit - Close the OSD menu. 3. Installation Unpacki
Resumen del contenido incluido en la página 9
Installing the Base Follow these steps to install the base: 1. Turn the monitor down. 2. Assembly the base to the arm with screw. 3. Tighten the screw with a coin. Installing the Monitor This monitor is equipped with an auto sensing DC power adapter for voltage ranges of 100-240VAC, 60/50Hz. Follow these steps to install the monitor: 1. Before you connect the cables, made sure that the monitor and the system unit power switches are off. 2. Plug one end of the 15 pin-sign
Resumen del contenido incluido en la página 10
User Setting Area The user settings by the user on the last display mode maintain in the memory of the micro-controller. You can change the settings or add a nonstandard mode. The micro-controller always detects and displays the last mode stored in the user setting area when the monitor is turned on. Factory Presetting Area There are some preferred display modes preset in the micro-controller. These display modes are preset at the factory and include the most popular display modes cu
Resumen del contenido incluido en la página 11
15-pin Mini D-type Male Connector Pin Assignment 1 Red Video 6 Red Ground 11 Ground 2 Green Video 7 Green Ground 12 Serial Data/I/O 3 Blue Video 8 Blue Ground 13 H. Sync 4 Ground 9 No Connection 14 V. Sync 5 No Connection 10 Sync Ground 15 Serial Clock Input 6. Power Saving Features When the power saving is active, the power indicator LED will be from Green Light to Amber. The power saving feature complies with these VESA power saving modes: Power Mode H. Sync. V. Sync.
Resumen del contenido incluido en la página 12
7. Product Specifications Model V141 Features Panel Type: Anti-glare, active TFT-LCD Size: 14.1 ” diagonal Pixel Pitch: 0.279 (W) ×0.279 (H) mm Brightness: 150 cd/㎡ (typical) Contrast Ratio: 300:1 (typical) Response Time: 23 ms (typical) Viewing Angle(H / V) 80° / 50° Max. Resolution: 1024 (W) x 768 (H) @ 60 Hz (non-interlace) Display Color 262K Maximum Viewable Size 14.1 inch (35.8cm) Video Input Analog:15-pin, D-sub connector Display Area 11.2 (W
Resumen del contenido incluido en la página 13
8. Dead Pixel Policy Dead pixels on the TFT LCD panel are sometimes inevitable. ViewEra guarantees that the monitor will be replaced if the number of dead pixels on our monitor exceeds 5 pixels. 9. Warranty & Customer Service Warranty ViewEra warrants the V141 TFT-LCD monitor for three years for parts and labor, one year for LCD panel from the date of purchase. For detail warranty information, please refer to our website – http://www.viewera.com/warranty.htm Customer Service
