Resumen del contenido incluido en la página 1
ENGLISH ENG
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the
your set and retain it for future reference.
MONITOR SIGNAGE MODEL
47VL10
www.lg.com
Resumen del contenido incluido en la página 2
ENGLISH ENG 2 TABLE OF CONTENTS CONTENTS 3 LICENSES 26 MAKING CONNECTIONS 27 Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or 4 ASSEMBLING AND VCR player PREPARING 27 - HDMI connection 4 Accessories 27 - HDMI/DVI connection 5 Optional Accessories 28 - AV(CVBS) connection 6 Parts and buttons 7 Connecting the stand 29 TROUBLESHOOTING 7 Connecting the Speakers 9 Connecting stand hole cover 9 To install Portrait 32 SPECIFICATIONS 10 Installing on a wall 35 CONTROLLING THE
Resumen del contenido incluido en la página 3
ENGLISH ENG 3 LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Resumen del contenido incluido en la página 4
ENGLISH ENG 4 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Power Cord Remote control and Batteries 15-pin D-SUB Signal Cable User Manual/Card CAUTION y Do not use any pirated items to ensure the safety and product life span. y Any damages or injuries
Resumen del contenido incluido en la página 5
ENGLISH ENG ASSEMBLING AND PREPARING 5 Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand Screws Speaker Screws/Cable Cable holder/ cable management Cable Tie Stand kit Speaker kit Screws Stand hole cover Stand hole cover kit NOTE y Cable holder/Cable tie may not be available in some areas
Resumen del contenido incluido en la página 6
ENGLISH ENG 6 ASSEMBLING AND PREPARING Parts and buttons Screen Buttons Screen Marks Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. ▼▲ Adjust the up and down. ◄ ► Adjusts the volume level. AUTO/SET For optimal screen display, automatically adjusts screen resolution. Turns the power on or off. / I IR Receiver This is where the unit receives signals from the remote control. Power Indicator This Indic
Resumen del contenido incluido en la página 7
ENGLISH ENG ASSEMBLING AND PREPARING 7 Connecting the stand Connecting the Speakers - Only on some models. - Only on some models. Take the parts for the stand out of the box and Mount the product onto the speaker by using 1 1 assemble them as shown in the picture. a screw as shown in the following connect the speaker cable. Stand Screws cable management 2 After installing your speakers, use holders and 2 Place a soft cloth on the table and put the cable ties to organize the speaker cab
Resumen del contenido incluido en la página 8
ENGLISH ENG 8 ASSEMBLING AND PREPARING Using the Kensington security system Cable Management - Only on some models. The Kensington security system connector is located at the back of the Monitor set. For more Arrange the cables in the center as shown in 1 information of installation and using, refer to the the following picture. manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and
Resumen del contenido incluido en la página 9
ENGLISH ENG ASSEMBLING AND PREPARING 9 Connecting stand hole cover To install Portrait - Only on some models. - Only on some models. Take the parts for the stand out of the box and 1 When installing Portrait, rotate it clockwise based assemble them as shown in the picture. on its front. Stand hole cover Screws Place a soft cloth on the table and put the 2 product with the screen facing downward. Connect the stand hole cover as shown in the following picture. NOTE y When using the wal
Resumen del contenido incluido en la página 10
ENGLISH ENG 10 ASSEMBLING AND PREPARING Installing on a wall CAUTION y Disconnect the power cord first, and then move or install the Monitor set. Otherwise Install the monitor at least 10 cm away from the electric shock may occur. wall and leave about 10 cm of space at each side y If you install the Monitor set on a ceiling or of the monitor to ensure sufficient ventilation. De- slanted wall, it may fall and result in severe tailed installation instructions can be obtained from injury. Us
Resumen del contenido incluido en la página 11
ENGLISH ENG REMOTE CONTROL 11 REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION y Do not mix old and new batteries, as this may damage the rem
Resumen del contenido incluido en la página 12
ENGLISH ENG 12 USING THE MONITOR SET USING THE MONITOR SET Using the input list Connecting to a PC Your Monitor set supports the Plug & Play* feature . Selecting an input source * Plug & Play: The function when a PC recognizes 1 Press INPUT to access the input source list. a connected device that users connect to a PC - The connected device displays on each input and turn on, without device configuration or user source. intervention. Press the Navigation buttons to scroll to one of 2 the i
Resumen del contenido incluido en la página 13
ENGLISH ENG USING THE MONITOR SET 13 RGB connection HDMI/DVI connection Transmits the analog video signal from your PC to Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the set with the HDMI/DVI cable as shown the following illustrations. following illustrations. Select RGB input source. Select HDMI/DVI input source. PC PC PC/MAC PC (not included) (not inc
Resumen del contenido incluido en la página 14
ENGLISH ENG 14 USING THE MONITOR SET HDMI connection Connecting to the LAN Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and LAN connection the Monitor set with the HDMI cable as shown in the following illustrations. Connect the LAN cable and install the eZ-Net Select HDMI/DVI input source. Manager program on the CD-ROM. For more information about the program, please refer to eZ-Net Guide in the enclosed CD-ROM. PC Connect PC to Monitor dir
Resumen del contenido incluido en la página 15
ENGLISH ENG CUSTOMIZING SETTINGS 15 CUSTOMIZING SETTINGS Accessing main menus Press MENU to access the main menus. 1 Press the Navigation buttons to scroll to one of the following menus and press SET. 2 3 Press the Navigation buttons to scroll to the setting or option you want and press SET. When you are finished, press EXIT. 4 PICTURE ( See p.16 ) Adjusts the image size, quality, or effect AUDIO ( See p.20 ) Adjusts the sound quality, effect, or volume level TIME ( See p.21 ) Sets the ti
Resumen del contenido incluido en la página 16
ENGLISH ENG 16 CUSTOMIZING SETTINGS PICTURE settings Picture Picture Mode Press MENU to access the main menus. 1 Color Temperature Advanced 2 Press the Navigation buttons to scroll to PICTURE and Aspect Ratio press SET. Picture Reset Press the Navigation buttons to scroll to the setting or Screen 3 option you want and press SET. - To return to the previous level, press . When you are finished, press EXIT. 4 MENU The available picture settings are described in the following: Setting Descri
Resumen del contenido incluido en la página 17
ENGLISH ENG CUSTOMIZING SETTINGS 17 Setting Description Color Color Settings Temperature Option Cool Sets the screen color to a bluish tone. Medium Sets the screen to the standard color. Warm Sets the screen color to a reddish tone. User Select this option to use the user-defined settings. Gamma You can adjust brightness of dark area and middle gray level area of the Advanced (Low/Medium/High) picture. » Low: Make dark and middle gray level area of the picture brighter. » Medium: Express origin
Resumen del contenido incluido en la página 18
ENGLISH ENG 18 WATCHING TV Aspect Ratio - Original : The aspect ratio is not adjusted from the original. It is set by the program being Resize the image to view the image at its optimal watched. size by pressing ARC button while you are watching Monitor set. CAUTION y If a fixed image displays on the screen for a Original long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. y If t
Resumen del contenido incluido en la página 19
ENGLISH ENG WATCHING TV 19 14:9 : You can view a picture format of 14:9 or a general Monitor set programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. - Zoom 1,2 : The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. MODE AV HDMI/DVI RGB ARC DTV PC PC 16:9 o o o o Just Scan x o x x Original o x x x 4
Resumen del contenido incluido en la página 20
ENGLISH ENG 20 CUSTOMIZING SETTINGS AUDIO settings AUDIO Sound Mode Press MENU to access the main menus. 1 Auto Volume Press the Navigation buttons to scroll to AUDIO and press 2 Balance SET. Speaker 3 Press the Navigation buttons to scroll to the setting or option you want and press SET. - To return to the previous level, press . When you are finished, press EXIT. 4 MENU The available audio options are described in the following: Setting Description
