Resumen del contenido incluido en la página 1
VOL
TONE LO
AMPLIFY
TM
Amplified, Caller-ID, Call Waiting, Speaker Telephone
SPEAKER NEWCALL
DELETE
MENU
DIAL
OK
STORE
MEMORY
MODE
R/P
FLASH
MUTE
HOLD
OWNER’S MANUAL
1st Edition
Resumen del contenido incluido en la página 2
INDEX CHAPTER Title Page ONE Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TWO Package checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 THREE Starplus45 features identification . . . . . . . . . . . . . . . . . . . . 5 FOUR Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 FIVE Operating your Starplus45 . . . . . . . . . . . . . . . . . . . . . . . . . 8 SIX Using Starplus45 Call Features .
Resumen del contenido incluido en la página 3
SAFETY INSTRUCTIONS When using your Starplus45, you should always follow these basic safety pre- cautions to reduce the risk of fire, electric shock and injury to persons. 1. Read and understand all instructions. 2. Unplug the unit from the adaptor and the telephone cord before installing a back-up battery. Do not dispose the batteries in a fire; follow your local code for properly disposing batteries. 3. Do not open the cabinet of the unit except for the battery cover. You may be exposed t
Resumen del contenido incluido en la página 4
ADDITIONAL SAFETY NOTES FOR CANADIAN USERS NOTICE: The Canadian Department of Communications label identifies certified equip- ment. This certification means that the equipment meets certain telecommuni- cations network protective, operational, and safety requirements. The depart- ment does not guarantee the equipment will operate to the user’s satisfaction. Before installing the equipment, the user should ensure that it is permissible to be connected to the facility of the local telecommunicat
Resumen del contenido incluido en la página 5
CHAPTER 1 INTRODUCTION Thank you for your purchase of the Starplus45 Amplified, Caller-ID, Call Waiting, and Speaker Telephone by Krown Manufacturing Inc. This phone is designed for the hear- ing, or mild to severe hearing loss users. You will be able to adjust not only the volume but you can adjust the clarity of the sound to the best quality you feel comfortable at. The Starplus45 speaker-phone will give convenience and making hands-free telephone communication more enjoyable. You will be abl
Resumen del contenido incluido en la página 6
CHAPTER 2 PACKAGE CHECK LIST Your Starplus-45 model comes with the following parts: • Starplus-45 amplified, Caller-ID, Call Waiting, Speaker-phone • Handset with coiled cord • AC adapter • 7 foot telephone cord • 6 inch telephone cord for use with wall mount • Desktop/wall base adapter 4
Resumen del contenido incluido en la página 7
CHAPTER 3 STARPLUS-45 FEATURES IDENTIFICATION 4 22 34 20 7 8 30 27 15 5 6 13 13 14 29 24 16 11 19 21 3 9 25 17 12 28 26 10 33 1 2 23 31 1 Amplify button 13 Left & right arrow keys 24 Ringer switch 2 Amplifier LED 14 Memory 25 Ringer tone 3 Audio jack 15 Menu selector switch 4 Battery cover 16 Mode 26 Speaker phone button 5 Delete 17 Mute 27 Speaker phone light 6 Dial 18 OK button 28 Speaker phone volume 7 Dial mode selector 19 Redial 29 Store 8 Display 20 New call or message 30 Telephone jac
Resumen del contenido incluido en la página 8
CHAPTER 4 Setup your Starplus45 Setting up your Starplus45 includes installing backup batteries and mounting the phone. Your Starplus45 will still operate normally in power outrages before it falls back to a regular telephone. Replace with new batteries after each power blackout. For your safe- ty, the Starplus45 can be used to call out with no backup batteries installed. 1. Installing backup battery Starplus45 uses 4 AA alkaline backup batteries. Unplug the power adapter and telephone lin
Resumen del contenido incluido en la página 9
CH. 4 (CONT) 3. Wall mounting a. Install wall mounting plate as shown in Figure 4.3 b. Take the handset hook out and flip it to reverse position as shown in Figure 4.7. It will hold the handset when the phone is in a vertical position. c. Use the provided 6 inch modular cord to mount the phone as shown Figure 4.8. d. Repeat step 3 through 6 of Desktop mounting section to complete the setup. The Starplus-45 will automatically update the current date and time from the first Caller ID received afte
Resumen del contenido incluido en la página 10
CHAPTER 5 Operating your Starplus-45 1 MAKING AND RECEIVING CALLS Using the handset Using the speakerphone MAKING A CALL 1. Pick up the handset. Listen 1. Key in desired for the dial tone telephone number. 2. Dial desired number. Your 2. Press DIAL (The phone will conversation starts when the automatically go to other end answers your call. speakerphone mode). 3. Hang up upon completion of 3. To hang up, press the call. SPEAKER key. 1. Pick up the handset and start 1. Press SPEAKER key and RECEI
Resumen del contenido incluido en la página 11
CH. 5 (CONT) 2. Adjusting sound levels A. INCOMING VOICE VOLUME By sliding the VOLUME control, you can adjust the sound level of incoming calls up to 20 dB. by pressing “AMPLIFY” button, you can control amplification up to 45dB. 1. Pick up the handset and press the AMPLIFY button once, the “)))” icon appears on the top left of the display and the AMPLIFY LED will come on. 2. Slide the volume control when the other person is talking to adjust to a comfortable level. The amplifier feature turns
Resumen del contenido incluido en la página 12
CH. 5 (CONT) G.LCD BACKLIGHT DISPLAY The LCD has a back light that will turn on under the following conditions: • Any incoming call • Picking up the handset • Pressing any button NOTE: The backlight will turn off automatically 15 seconds after the last activity. The AC adapter must be plugged into the unit to enable the BACK LIGHT. H.ADJUSTING LCD CONTRAST 1. Press MENU to toggle the display to -3- “LCD CONTRAST” 2. Press to increase or to decrease contrast level from 0 to 9. 3. Pres
Resumen del contenido incluido en la página 13
CHAPTER 6 Using your Starplus45 Call features 1. MUTE Press MUTE to turn off the handset microphone, allowing private conversations in the same room without the other party hearing. Press MUTE again to resume the conversation with the calling party. NOTE:During the mute condition, the display will show < MIC MUTE >. 2. HOLD 1. To place a call on hold, press HOLD and placed the handset on hook. The HOLD LED will light, the display will show < CALL ON HOLD > . 2. To begin conversation again, pick
Resumen del contenido incluido en la página 14
CH. 6 (CONT) A.EDITING AN ENTRY To program KROWN telephone number, 8177382485 into memory: 1. Press STORE (Display shows STORE TO ?) 2. Press MEMORY (Display shows NUMBER ?) 3. Enter the phone number 8 1 7 7 3 8 2 4 8 5 using the phone keypad 4. Press STORE or OK (Display shows NAME ?) *Enter the name K R O W N using the numeric keypad (5577666966) 5. Press STORE or OK, the phone will beep and the display will show STORED If you do not want to store a name, skip step 4. FIGURE 6.1 FIGURE 6.2 FIG
Resumen del contenido incluido en la página 15
CH. 6 (CONT) B. EDITING AN EMERGENCY BUTTON These emergency buttons are empty and you must choose the number for each button. Select the number reserved for: Hospital Fire Police Follow step 1 of the above “EDITING AN ENTRY”. Press the corresponding button for hospital, fire, police. Continue with step 3 to 5 to completely enter an emergency number. Press the corresponding button again to display name and number you entered. Press mode to exit display name and number and return to main display.
Resumen del contenido incluido en la página 16
CH. 6 (CONT) *DIALING NUMBERS FROM THE MEMORY By using the handset: Pick up the handset and follow the sequence “REVIEW A NUMBER FROM THE MEMORY” until the display shows the name and number that you want to dial. Press DIAL. By using the speakerphone: Choose the desired name in MEMORY. Press DIAL. The phone will enter speakerphone mode and will dial the displayed number. *EMERGENCY DIALING Press the corresponding button for hospital, fire, or police and press DIAL. F. CHANGING A SPEED DIAL NUMB
Resumen del contenido incluido en la página 17
CH. 6 (CONT) 6. USING CALLER ID Caller Identification is a service offer by your local telephone company. If you are not sure if you have this option in your telephone service contract, contact them for more detail. Starplus-45 will automatically update date and time after receiving the first Caller-ID call. Starplus-45 can record up to 50 missed calls, 50 answered calls, and 10 dialed number history. The oldest entry will be erased if the entry is over 50 calls or 10 dials. Starplus-45 also ca
Resumen del contenido incluido en la página 18
CH. 6 (CONT)\ VIEW MISSED CALL 1. Press MODE to toggle the displayed to MISSED CALL -XX-. 2. Use the or to list the missed calls. The new missed call will be displayed first. After all missed calls are displayed, the new-call LED stops flashing. FIGURE 6.1 FIGURE 6.2 VIEW ANSWERED CALL 1. Press MODE to toggle the display to ANSWERED CALL -XX-. 2. Use the or to list the answered calls. FIGURE 6.3 FIGURE 6.4 VIEW DIALED NUMBER Starplus45 can keep last 10 dialed numbers the dialed
Resumen del contenido incluido en la página 19
CH. 6 (CONT) E. DELETING ALL CALLS 1. Press MODE to toggle the display to MISSED CALL, ANSWERED CALL or DIALED NUMBER to delete that list. 2. Press the DELETE once and the display will show “DELETE ALL?” 3. Press the DELETE or OK to confirm. NOTE: You can’t erase missed calls before it has been reviewed. F. TRANSFERRING A CALLER ID NUMBER TO SPEED DIAL MEMORY When a caller ID number is displayed you can transfer it to a speed dial memory by pressing “STORE” button. Select a speed dial button or
Resumen del contenido incluido en la página 20
CH. 6 (CONT)\ 9. NAME TAGGING When an incoming call is matched with a number stored in MEMORY, the name stored in the MEMORY will be tagged to the incoming phone number. CALL WAIT ID ON/OFF 1. Repeatedly press MENU until “CALL WAIT ID ON” appears. 2. Press or to choose CALL WAIT ID ON/OFF. 3. Press OK or MENU to complete the setting, or press DELETE to disregard the setting and return to standby mode, or you can do nothing and wait for 15 seconds to disregard the setting and return to st
