Resumen del contenido incluido en la página 1
Getting Started En
Mise en route Fr
Introducción Es
Introdução Pt
FT6-0759 (000)
Resumen del contenido incluido en la página 2
X 13 X 2 X 1 Limited Warranty Notice (US Only) X 1
Resumen del contenido incluido en la página 3
X 1 X 5 X 2 X 1 X 1
Resumen del contenido incluido en la página 4
Option Attach the Optional Cassette to the Machine ★ = 4″ (100 mm) 17 3/8" 18 5/8" 2 3/4" (441 mm) (473 mm) (68 mm) 15 3/8" (390 mm) 10 3/8" (264 mm) 17" (431 mm) 5 1/2" (138 mm)
Resumen del contenido incluido en la página 5
Take the cassette from the carton, and remove NOTE all packing materials, including shipping When moving the main unit, be sure to carry tape before attaching the optional cassette English it from front side by using the provided hand to the machine. Make sure the machine and grips on the left and right sides, as seen in the the optional cassette are facing in the same illustration. direction when being attached. Sortez la cassette de son carton et retirez tous les matériaux d’emballage
Resumen del contenido incluido en la página 6
Contents About the Supplied Manuals .....................................8 Connecting via a USB Cable...................................10 Navigating the Menu and Text Input Method .............8 Connecting via a Wireless LAN ...............................10 Connecting the Power Cord and Turning ON Setting Wireless LAN ..............................................11 the Power ..................................................................9 Setting a Paper Size and Type .....................
Resumen del contenido incluido en la página 7
7
Resumen del contenido incluido en la página 8
About the Supplied Manuals Navigating the Menu and Text Input Method Getting Started (This manual): Read this manual fi rst. This manual describes the installation of the machine, the settings, and a caution. Be sure to read this manual before using the machine. Menu Back ▲▼◀▶OK Numeric keys #C Entering text, symbols, and Changing entry mode numbers Entry mode Available text MF Driver Installation Guide Entry mode: Entry mode: Entry mode: Uppercase alphabetic letters and symbols (
Resumen del contenido incluido en la página 9
● Connecting the Power Cord and Turning Connecting via a USB cable ON the Power You can connect the machine to the computer using a USB cable. Make sure that the USB cable you use has the following mark. ● Connecting via a Wireless LAN (1) (2) You can connect the machine to the computer through a wireless router*. Since it is connected to wireless, no LAN cables are needed. Do not connect the USB cable at this time. Connect it when installing software. * A wireless router (access poi
Resumen del contenido incluido en la página 10
Connecting via a Wired LAN Connecting via a USB Cable Connect the USB cable after installing the MF Drivers and Checking Before the Setup the MF Toolbox. Router Internet or hub NOTE • If you connected the USB cable before installing the LAN cable MF drivers, refer to the MF Driver Installation Guide. Install the driver and software using the User 1 Software and Manuals CD-ROM. Is the computer and the router (or hub) properly See “Installing the Driver/Software” (P.13). connected using a L
Resumen del contenido incluido en la página 11
NOTE Select , and then press [OK]. 5 • You cannot connect both the wired LAN and wireless LAN at the same time. In addition, the machine is set You should press the WPS button within 2 6 to the "Wired LAN" by default. minutes after you select in step 5. Press • When you connect to a network environment that is and hold* the button until the lamp lights or not security protected, your personal information could blinks. be disclosed to third parties. Please use caution. * The
Resumen del contenido incluido en la página 12
Press [ ] (Menu). Checking SSID or Netw ork Key for a Wireless 1 LAN Router/Access Point You can check the SSID or the network key using “Canon Select , and then press [OK]. 2 MF/LBP Wireless Setup Assistant,” which is included in the supplied User Software and Manuals CD-ROM with the Select , and then press [OK]. machine. 3 If you use Macintosh computers: The User Software and Manuals CD-ROM that comes with Select , and then p
Resumen del contenido incluido en la página 13
Exit the Fax Setup Guide, and then restart the 3 Setting a Paper Size and Type machine. Following the instructions on the screen, set the paper size End Fax Setup Setting is complete. and type. Turn the main power Guide? OFF and ON. OK Yes No Turn OFF the machine and wait for at least 10 seconds before turning it ON again. The telephone line types are not detected automatically. See the e-Manual and set a telephone line manually. e-Manual “Fax” ▶ “Using the Fax Functions” ▶ “Changing
Resumen del contenido incluido en la página 14
Perform Useful Tasks You can use various functions in this machine. Following functions are the overview of the main functions that you can use routinely. Receiving Copy Scan ● Receiving in the memory Enlarged/Reduced Copies Saving the Documents Using the You can store the received Operation Panel of the Machine You can enlarge or reduce standard documents in the memory. You can size documents to copy on standard print the stored documents at any size paper or specify the copy ratio in
Resumen del contenido incluido en la página 15
Clearing Paper Jams If the following screen appears, a paper jam has occurred in the feeder or inside Paper jam. the machine. Follow the procedure displayed on the screen to remove the jammed document or paper. This manual indicates only areas where paper jams occur. For Press [ ] to details on each function, see the e-Manual. display steps. Feeder Output Area Multi-purpose tray Paper Drawer Front Cover 2-sided Transport Guide En Duplex unit Back Cover 15
Resumen del contenido incluido en la página 16
Replacing Toner Cartridge Toner cartridges are consumables. When the toner becomes nearly empty or has run out completely in the middle of a job run, a message appears on the screen, or the following problems may occur. Take the appropriate action accordingly. When a Message Appears When the toner becomes nearly empty in the middle of a job run, a message appears on the screen. When the message is Message Description and Solutions displayed on the screen
Resumen del contenido incluido en la página 17
CAUTION Symbols Used in This Manual • Do not install the machine in the following locations. Doing so may result in personal injury, fi re or electrical shock. WARNING − Unstable location Indicates a warning concerning operations that may lead to death − A location subject to excessive vibrations or injury to persons if not performed correctly. To use the machine − A location where block the ventilation slots (too close to walls, safely, always pay attention to these warnings. bed, shaggy
Resumen del contenido incluido en la página 18
Consumables CAUTION • For your safety, please unplug the power cord if the machine will WARNING not be used for a long period of time. • Use caution when opening and closing covers to avoid injury to • Do not dispose of used toner cartridges in open fl ames. This may your hands. cause an ignition, and result in burns or fi re. • Keep hands and clothing away from the rollers in the output • If you accidentally spill or scatter toner, carefully wipe up the loose area. If the rollers catch yo
Resumen del contenido incluido en la página 19
FCC (Federal Communications Commission) Legal Notices imageCLASS MF6180dw: F166102 imageCLASS MF6160dw: F166102 Legal Limitations on the Usage of Your Contains Transmitter Module FCC ID: AZDFM48944 Product and the Use of Images Using your product to scan, print or otherwise reproduce certain This device complies with Part 15 of the FCC Rules. Operation is documents, and the use of such images as scanned, printed or subject to the following two conditions: otherwise reproduced by your product
Resumen del contenido incluido en la página 20
In Case of Equipment Malfunction Users in the U.S.A. Should any malfunction occur which cannot be corrected by the Pre-Installation Requirements for Canon Facsimile Equipment procedures described in this guide or the e-Manual, disconnect the equipment from the telephone line cable and disconnect the power A. Location cord. Supply a suitable table, cabinet, or desk for the machine. See the The telephone line cable should not be reconnected or the power e-Manual for specifi c dimensions and we
