Resumen del contenido incluido en la página 1
RI77
Induction Hob
User Guide
&
Installation & Service Instructions
U109919 - 03
Resumen del contenido incluido en la página 2
Contents Before You Start... 1 Hob Overview 3 Cleaning Your Hob 8 Troubleshooting 9 Installation 10 Circuit Diagram 13 Technical Data 14 Warranty/After Sales Service 15
Resumen del contenido incluido en la página 3
1. Before You Start... Thank you for buying a Rangemaster hob. It should give you Do not spray aerosols in the vicinity of the hob while many years trouble-free cooking if installed and operated it is on. correctly. It is important that you read this section before Use dry oven gloves when applicable – using damp you start, particularly if you have not used an induction hob gloves might result in steam burns when you touch before. a hot surface. Do not use a towel or other bulky clo
Resumen del contenido incluido en la página 4
Hob Care Cleaning DO NOT use the hob surface as a cutting board. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. DO NOT leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.g. tea towels, frying pans In the interests of hygiene and safety, the hob should be kept containing oil). clean at all times as a build up of fats and other foodstuffs could result in a fire. DO NOT place plastic or aluminium foil, or pla
Resumen del contenido incluido en la página 5
DocNo.023-0002 - Overview - RI77 hob 2. Hob Overview Fig.2-1 ����� ����� �� �������������� � ���� ����� �� �������������� INDUCTION ArtNo.314-0004 RI77 labelled ����� ����� �� �������������� ����� ����� �� �������������� ELECTRONIC CONTROL � ������������� ��� ���� �������� The induction hob comprises of four cooking zones Fig.2-2 containing induction elements with different ratings and diameters (Fig.2-1), each with a pan detector and residual heat indicator. Each zone is controlled via the t
Resumen del contenido incluido en la página 6
Fig.2-5 � � � � � � � 1. Power ON/Power OFF 5. Zone selection indicator � 2. Cooking zone + 6. Timer control ArtNo.317-0001 60 Touch controls common 3. Cooking zone – 7. Timer display ELECTRONIC CONTROL 4. Digital display 8. TImer indicator lights (4 off) Pan Detector, If a cooking area is switched on and there is no pan in place or if the pan is too small for the cooking area, then no heat will be generated. The symbol [ ] will appear on the hob control display; this is the “pan-missing
Resumen del contenido incluido en la página 7
Note: The ‘+’ keys have a repeat function: holding the key Fig.2-9 pressed down will increase the power setting by one level every 0.3 seconds. To reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required (Fig.2-8). Note: The ‘–’ key has a repeat function: holding the key ArtNo.317-0004 60 Reducing power pressed down will reduce the power setting by one level every 0.3 seconds. To shutdown a coo
Resumen del contenido incluido en la página 8
Timer Function Fig.2-15 The timer has two settings: • Zone timer • Minute timer ArtNo.317-0007 60 Setting the zone timer Zone Timer This allows each cooking zone to be set to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time the zone will turn off automatically. Activating the timer: Select the required cooking zone and then: 1. Using the ‘+’ and ‘–‘ keys, set the desired cooking Fig.2-16 temperature. 2. Press the timer key (Fig.2-15): the timer display wi
Resumen del contenido incluido en la página 9
Turning off the timer alarm: Fig.2-19 At the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm. ArtNo.317-0007 60 Setting the zone timer Deactivating the timer: Make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display will go out. ������������������ ����� ��� ����� ���� Child Lock Function This allows the control panel to be locked to prevent any accidental use. Fig.2-20 IMPORTANT
Resumen del contenido incluido en la página 10
DocNo.043-0001 - Cleaning - BI hob induction 3. Cleaning Your Hob Essential Information Cleaning Burned-on Spills Allow the hob to cool and isolate the electricity supply before Make sure that the residual heat indicators are off and that carrying out any thorough cleaning. the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of Never use paint solvents, washing soda, caustic cleaners, about 30° to the surface and then scrape
Resumen del contenido incluido en la página 11
DocNo.053-0001 - Troubleshooting - BI hob induction 4. Troubleshooting If there is an installation problem and I don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this installer so that you can contact them as required. A crack has appeared in the hob surface. Isolate the hob immediately from t
Resumen del contenido incluido en la página 12
INSTALLATION Check the appliance is electrically safe when you have finished. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details The hob may be installed in a kitchen/kitchen diner but NOT BELOW. in a room containing a bath or shower. This appliance is designed for domestic cooking only. Use for ��������� � ������ any other purpose could invalidate any warranty or liability claim. This appliance should not be installed in a boat or
Resumen del contenido incluido en la página 13
INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob Fig.5-1 The hob should be fitted into a work surface, which is at ������ ��� least 600mm deep. In position, the hob has a maximum thickness of 5mm from the top of the work surface, and an ���� overall thickness of 45mm (65mm max depth including the connection block). The cut-out dimensions are shown in (Fig.5-1), and the minimum clearances in (Fig.5-2). ����� ��������������� � ����� ������� �� No
Resumen del contenido incluido en la página 14
INSTALLATION Check the appliance is electrically safe when you have finished. Secure the hob to the worktop using the brackets supplied. Fig.5-4 ��� The positioning of the bracket (and sleeve) is dependent on the thickness of the worktop as shown in (Fig.5-4). � ���� �� ����� Note: Slide the optional sleeve onto the bracket if fitting to thin work surfaces. Locate the bracket to the slot on the hob base and then ����� � tighten the retaining screw until it is locked to the worktop. �� ��� �� �
Resumen del contenido incluido en la página 15
6. Circuit Diagram ���� �� �� �� �� �� �� �� �� �� �� �� �� ��� ��� �� ��� �� ��� ��� ��� ��� ��� �� �� � � �� �� � � �� ��� � � �� ��� ��� �� ��� ��� �� �� ��� � ��� � ArtNo.080-0014 RI60-RI77 circuit diagram �� � � �� ��� ��� �� ��� ��� �� ��� ��� � � �� �� �� � ������� ��� �� �� ���� ��� ��� �� � �� ��� ����� ��� �� ���� �� � �� � �� � ����� � ArtNo.050-0015 - Wiring colour �� � ��� � code table INDUCTION ArtNo.314-0007 Induction hobs labelled �� � ���� � � � � ���� �� ����� ���� � � � � ELEC
Resumen del contenido incluido en la página 16
DocNo.103-0002 - Technical data - RI77 hob 7. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob. COUNTRY OF DESTINATION: GB/IE Dimensions 45mm; Above worktop: 5mm; Overall height 65mm including connection box Below worktop: 40mm Overall width 770mm; see ‘Positioning of the Hob’ Overall depth 510mm Space for fixing See ‘Positioning of the Hob’ Minimum space above hotplate 650mm Connections Electric 220 – 240V 50Hz Ratings Maximum tota
Resumen del contenido incluido en la página 17
DocNo.111-0001 Warranty 8. Warranty/After Sales Service If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please
Resumen del contenido incluido en la página 18
16
Resumen del contenido incluido en la página 19
17
Resumen del contenido incluido en la página 20
DocNo.000-0001 - Back cover Rangemaster � � �� � ����������� �������� ������� ������� �� w w w . r a n g e m a s t e r . c o . u k ArtNo.000-0003 CE logo
