Résumé du contenu de la page N° 1
Model 27906
2.4 GHz Cordless
Telephone System
User’s Guide
Résumé du contenu de la page N° 2
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request
Résumé du contenu de la page N° 3
Notes • This equipment may not be used on coin service provided by the telephone company. • Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. • Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. • If your home has specially wired alarm equipment connected to the telephone line, ensure the installati
Résumé du contenu de la page N° 4
discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; () affor d you the opportunity to correct the situation; and () inform y ou of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures wher
Résumé du contenu de la page N° 5
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Privacy of Communications may not be ensured when using this product. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
Résumé du contenu de la page N° 6
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/ television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 00. Please specify stock number 00-000-005- when ordering copies. Notice: The changes or modifications not e
Résumé du contenu de la page N° 7
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.” For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt
Résumé du contenu de la page N° 8
Table of Contents EquipmEnt Apprvo Al i nformA tion .................................... 2 i E nt rfErEncE i A nform tion ................................................ 4 HEAring Aid c omp Atibility (HAc ) .................................... 6 l E ic nsing ........................................................................ 6 c fc rf r AdiA tion ExposurE s t AtEmEnt ........................... 7 i ntroduction ................................................................ 11 b EE for y o
Résumé du contenu de la page N° 9
Table of Contents r eDial ........................................................................................22 i n u se i nDiCorta ......................................................................22 Flash .........................................................................................22 v umeol ......................................................................................23 Channel Butont ......................................................................23 t emP o
Résumé du contenu de la page N° 10
Table of Contents r evie Wing anD Deleting s oreD t n umBers ..........................36 Dialing a s D oret n umBer ......................................................37 Chain Dialing From m emory .................................................38 c HAnging tHE b AttEry ................................................... 39 Btterya s F a ety PreCutionsa ..................................................39 d ispl Ay m EssA gEs .......................................................... 40 HAn
Résumé du contenu de la page N° 11
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Before You Begin Parts Checklist Make sure your package includes the items shown here. Handset
Résumé du contenu de la page N° 12
Telephone Jack Requirements To use this phone, you need an RJ11C Wall plate type modular telephone jack, which Modular might look like the one pictured here, telephone installed in your home. If you don’t have line jack a modular jack, call your local phone company to find out how to get one installed. Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATIO
Résumé du contenu de la page N° 13
Certain other communications devices may also use the 2.4 GHz frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owner’s manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 2.4 GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cor
Résumé du contenu de la page N° 14
Important Installation Guidelines • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight. • Avoid areas of excessive dust, moisture and low temperature. • Avoid other cordless telephones or personal computers. • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wi
Résumé du contenu de la page N° 15
Handset Layout Vol Boost (volume boost display button) talk/call back (button) CID/vol 5 or 6 mem (caller ID/volume (memory button) 5 or 6 button) redial (button) format (button) TONE*/exit (button) # (pause button) delete/channel (button) flash/program (button) ringer (button) 15
Résumé du contenu de la page N° 16
Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-Cadmium (Ni-Cd) battery model 5-2459 or Nickel Metal Hydride battery model 5-2522 that is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset. . Locate the battery compartment on the back of th
Résumé du contenu de la page N° 17
NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. . Insert the battery pack. 5. Close the battery compartment by pushing the door up until it snaps into place. Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. . Plug one end of the telephone line cord into the TEL LINE jack on
Résumé du contenu de la page N° 18
. Set the ringer switch (on the handset) to ON, and place the handset in the cradle on the base. 5. The charge/in use indicator turns on, verifying the battery is charging. The unit will take 0 seconds to register and verify its security code. 6. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised. CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2617 or 5-2748 power adaptor li
Résumé du contenu de la page N° 19
Handset Setup There are five programmable menus available: Language, Local Area Code, Ringer Tone, Tone/Pulse and Factory Default. When you program these settings, make sure the phone is OFF (not in talk mode). Pressing the TONE*/exit button will remove you from the menu selection process without changing the feature you are in. Display Language 1. Press the flash/program button until 1ENG 2FRA 3ESP shows in the display. . Use the CID/vol ( 5 or 6) button or the handset number pad to sel
Résumé du contenu de la page N° 20
. Use the handset number pad to enter your -digit area code. NOTE: If you make a mistake, press the delete/channel button to erase the incorrect area code and repeat step 2. . Press the flash/program button to confirm and to advance to the next menu feature. Ringer Tone 1. Press the flash/program button until RINGER TONE shows in the display. . Use the CID/vol ( 5 or 6) button or the handset number pad (1-) to enter y our selection from Ringer Tone 1, , or . The default setting
