Résumé du contenu de la page N° 6
Important Safety Instructions Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property: Reduce risk of fire and shock by: 1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. 2. Do not use while wet or while standing in water. 3. Do not use this product near water (for example, near
Résumé du contenu de la page N° 7
Unplug this cordless phone immediately from an outlet if: • The power cord or plug is damaged or frayed. • Liquid has been spilled into the product. • The product has been exposed to rain or water. Do not retrieve the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by unplugged cords. • The product has been dropped or the cabinet has been damaged. • The product exhibits a distinct change in performance. Installation Guidelines 1. Read and
Résumé du contenu de la page N° 8
BD1217 ME4251 user guide [5] 7/7/05 1:20 pm Page 7 8. Use only the power supply that came with this unit. Using other power supplied may damage the unit. 9. Because cordless phones operate on electricity, you should have at least one phone in your home that isn't cordless, in case the power in your home goes out. 10. To avoid interference to nearby appliances, do not place the base of the cordless phone on or near a TV, microwave oven, or VCR. Technical Amendments These Operating Instructions
Résumé du contenu de la page N° 9
ME4851-2 ME4851-3 ME4851- 4 Package Contents Single Pack Twin Pack Triple Pack Base station 1 1 1 Handset 1 2 3 Mains Adaptor 1 2 3 Telephone Line Cord 1 1 1 Rechargeable Batteries (type AAA rechargeable) 2 4 6 Charger Unit (Handset) 0 1 2 Wireless Headset 1 1 1 Charger Unit (Wireless Headset) 1 1 1 (type Li-Poly) Rechargeable Batteries 1 1 1 Wireless Headset Adaptor 1 1 1 1 1 1 User's Guide Please check the contents of the package carefully. If something is missing or has become damaged in tra
Résumé du contenu de la page N° 10
Connecting the Base Station and Mains Adaptor 1. Feed the mains power adaptor cord and the telephone line cord through the small hole in the base stand as shown. 2. Insert the telephone line cord into the corresponding socket on the base station. 3. Connect the mains power adaptor plug in the corresponding socket on the underneath of the base station. 4. Attach the base stand to the main part of the base: Insert the 2 small plastic tabs on the stand into the 2 upper slotson the base (as shown).
Résumé du contenu de la page N° 11
Connecting the Charger Unit Plug the mains adaptor into the wall socket . The charger unit is now ready to use. Preparing the Handset(s) Inserting and Charging the Batteries Open the battery compartment, by pushing downwards on the cover. Insert the 2 x AAA (600mAh/1.2V) Ni-MH re-chargeable batteries supplied, observing the correct polarity. CAUTION : PLEASE DO NOT USE ALKALINE OR NON- RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO THE UNIT AND VOID THE WARRANTY. If the batteries
Résumé du contenu de la page N° 12
LOW BATTERY WARNING If the handset batteries are low and need charging you will hear a beep every 30 seconds and the icon will be displayed. Attaching a Headset Note: A headset is not included as standard. You can connect a headset to your handset. Lift the small rubber flap on the right side of the handset to reveal the headset socket. Connect the jack plug into the jack socket. With a headset connected the handset microphone and receiver loudspeaker are switched off and all communication is v
Résumé du contenu de la page N° 13
Telephone Features Congratulations on your purchase of this high quality, cordless telephone set. The set offers the following features: Digital sound quality (DECT) Priority call alert 4K Colour alphanumeric display with icons Message waiting alert 16 Polyphonic ringtones Emergency call number Phone book for 80 names, each with 3 9 Speed dial numbers contact numbers Separate ringtones for internal/ 4 Wallpapers (exclusive to Motorola) external/group and page calls Handsfree/Headset operation
Résumé du contenu de la page N° 14
Control Buttons 12 16 14 15 1. Display 8. OFF Key 13. #/Keypad Lock Key Use to end a call. Press to enter a hash. 2. Left Soft Key (SKL) Press to return to standby mode. Shortcut key to lock/unlock the keypad Press from standby to view the menu Press and hold to switch the power on/off. Press to select and confirm display items. 14. Page (Find Handset) Key Use to mute/unmute the microphone. 9. Pause/Voice Message Key Press to locate a missing handset/page all In games mode, press to pause/play.
Résumé du contenu de la page N° 15
Display Icons Signal icon Disappear if the handset moves out of communication range with the base. Key lock icon Keypad lock is active. Line in use icon Indicates that the line is in use. Alarm icon Alarm is set. Ring icon External ring volume is set to on. Battery icon Shows the battery charge level. No ring icon External ring volume is set to off. No Line icon Base not connected with PSTN. Mic mute icon Microphone is muted. Message waiting icon Indicates that there is messa
Résumé du contenu de la page N° 16
Menu Structure Handset settings Base settings Phone book 1. Ring Type 1. Base Ring Tone 1. Search 2. Ring Volume 2. Base Ring On/Off 2. Add 3. Ring On/Off 3. Priority Call Alert 3. Group 4. Pre Fix 4. Dial Mode 4. Speed Dial 5. Outgoing Call Bar 5. Register 5. Check 6. Message Waiting 6. De-register 6. Emergency Call 7. Wallpaper 7. Select Base 7. Area Code 8. Language 8. System PIN Call log 9. Contrast 9. Flash Time 1. Missed Call 10. Key Tone 10. Default 2. Received Call 11. Auto Answer 3.
Résumé du contenu de la page N° 17
Using the Telephone Note: If the handset is in the base station or charger unit, only the key and key will function. Lift the handset out of the base station/charger unit for use. Switching the handset On/Off When the handset is put in the base station/charger unit it switches on automatically and charges up. Allow the batteries to charge for 16 hours without interruption before first use. To switch the handset off: 1. In ON mode, press and hold the key for 2 seconds. To switch the handset on
Résumé du contenu de la page N° 18
Direct dialling 1. Press the key and wait for the dialling tone. 2. Dial the telephone number and complete the call. When the call is connected, the call duration will be displayed and will remain in the display until 3 seconds after the call is ended. The call timer format is HH:MM:SS. 3. Press the key to end the call. On-hook dialling (pre-dialling) 1. Dial the telephone number. 2. Delete any incorrect digits by pressing the SKR key. 3. Press the key. The displayed number is dialled. 4. To en
Résumé du contenu de la page N° 19
Switching During a Call 1. Dial the call number and press the key to start dialing. 2. Carry out the conversation. 3. Press the key to switch hand-free mode on or off. 4. Press or key to adjust the handset volume. 5. Press the key to end the call. Taking calls When an external call is received, all registered handsets ring and the LCD backlight will be on during ringing. The display shows Incoming call. The green incoming call light on the b
Résumé du contenu de la page N° 20
See page 37 for details on how to store a prefix number. Dialling from the Phone Book Note: To store a number in the Phone Book, see "Storing entries" on page 23. In standby mode: 1. Press the SKR key to enter the phone book. Note: If the phonebook is empty, No Records will be displayed for 2 seconds. 2. The first entry in the phone book is displayed. Press the or key to display the entry you want. 3. Press the key to dial the number. 4. Press the key to end the call. Access a Call Waiting Line
Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Congratulations on your purchase of a Motorola product! Your Motorola Telephone at a glance: 1 Welcome
Résumé du contenu de la page N° 3
For product-related questions, please refer to the Warranty section. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Complies with the essential protective requirements and objectives of the EC's R&TTE Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC Copyright © 2004 Motorola, Inc. All rights reserved. No par
Résumé du contenu de la page N° 4
Contents Using the Telephone . . . . . . . . . . . . . . . . .16 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Switching the Handset On / Off . . . . . . .16 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Making External Calls . . . . . . . . . . . . . . .16 Handset Range . . . . . . . . . . . . . . . . . . .16 Important Safety Instructions . . . . . . . . . .5 Direct dialing . . . . . . . . . . . . . . . . . . . . .17 Installation Guidelines . . . . . . . . .
Résumé du contenu de la page N° 5
Contents Phone Book Menu . . . . . . . . . . . . . . . . . .23 Selecting the LCD Mode . . . . . . . . . . . . . 43 Storing Entries . . . . . . . . . . . . . . . . . . . . .23 Resetting your Handset to the Storing Number in standby mode . . . . .25 Default Settings . . . . . . . . . . . . . . . . . . . .43 Searching Number in Phone Book . . . . .25 Handset default Settings . . . . . . . . . . . . .44 Phone Book Groups . . . . . . . . . . . . . . . .26 Base Setting Menu . . . . . . . . . . . . .
