Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
CONTENTS Introduction...................................................1 • Welcome............................................................ 1 • Features ............................................................ 1 • Included in Your Package .............................................. 2 Installing and Adjusting Your Phone...............................3 • Desk/Tabletop Installation.............................................. 3 • Wall Installation........................................
Résumé du contenu de la page N° 3
INTRODUCTION oduction WELCOME Congratulations on your purchase of the Uniden EXR2460 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 2.4 GHz Spread Spectrum technology. FEATURES • 2.4 GHz Spread Spectrum Technology • Caller ID and Call Waiting Caller ID • 50 Number Caller ID Memory • Lighted keypad • 3-Line, 16 Character Backlit LCD Handset Display • 10 Enhanced Memory Dial Locations • 32 Digit Redial • 2nd Battery Capabi
Résumé du contenu de la page N° 4
INCLUDEDINYOURPACKAGE TIP To get the most from your phone, please read this owner’s manual thoroughly. Also be sure to complete and mail the product registration form. Handset AC Adapter Base (AD-9500) NOTE If any of these items are missing or damaged, contact the Uniden Parts Rechargeable Battery Short Telephone Cord Beltclip (BT-2499) Department at (800)554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. We can also be reached on the web at www.uniden.com. Desk
Résumé du contenu de la page N° 5
INSTALLING AND ADJUSTING Installing and Adjusting Your Phone DESK/TABLETOPINSTALLATION TIP Before choosing a location for your phone, read the “Installation Considerations” included in the “Precautions and Important Safety Instructions” brochure. 1) Plug the AC adapter cord into the 10 V DC input jack on the back of the base. 2) Wrap the AC adapter cord around the strain relief notch. Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire
Résumé du contenu de la page N° 6
7) Attach the desktop stand to the base. HINT Before using your phone, fully charge the Nickel- Cadmium battery pack for 12-15 hours. 8) Set the base on a desk or tabletop and place the handset into the base. Then, raise the antenna to a vertical position. WALLINSTALLATION Place the power cord so that it does not create a Standard wall plate mounting trip hazard or where it could become chafed This phone can be mounted on any standard telephone wall plate. and create a fire or electrical hazar
Résumé du contenu de la page N° 7
INSTALLING AND ADJUSTING 3) Plug the AC adapter cord into the 10 V DC input jack on the back of the base. 4) Put the AC adapter cord inside the molded wiring channel, then wrap it around the strain relief notch. Plug DO NOT use an outlet the AC adapter into a standard 120 V controlled by a wall switch. AC wall outlet. 5) Plug one end of the short telephone cord into the TEL LINE jack on Before you plug the other the back of the base, then plug the end of the telephone cord other end into a stand
Résumé du contenu de la page N° 8
7) On the base unit, pull the handset retainer out of the slot and rotate it clockwise 180°. If the handset beltclip is attached, you cannot charge the handset with the display showing when the phone is mounted on the 8) Flip the retainer from front to back, wall (See page 14). then slide it back into the slot so that the lip of the retainer faces up and the oval is at the bottom of the retainer. This will hold the handset in place. 6 !
Résumé du contenu de la page N° 9
INSTALLING AND ADJUSTING Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Select a location away from electrical cables, pipes, or other items behind the mounting location. Inserting screws into areas such as this can be hazardous. • Try to mount your phone within 10 - 15 feet of a working phone jack in order to avoid excessive cord lengths. Remember, you are not mounting to a wall plate wi
Résumé du contenu de la page N° 10
3) Rotate the mounting adapter 180° and snap it into place at the bottom of the base. 4) Plug the AC adapter cord into the 10 V DC input jack on the back of the base. 5) Put the AC adapter cord inside the molded wiring channel, then wrap it around the strain relief notch. Plug the AC adapter into a standard 120V AC wall outlet. 6) Plug one end of the long telephone cord into the TEL LINE jack on the back of the base, then plug the other end into a standard telephone jack. 8
Résumé du contenu de la page N° 11
INSTALLING AND ADJUSTING 7) Line up the mounting slots on the base with the mounting screws on the wall, then push in and down until the phone is firmly seated. 8) On the base unit, pull the handset retainer out of the slot and rotate it clockwise 180°. 9) Flip the retainer from front to back, then slide it into the slot so that the lip of the retainer faces up and the oval is at the bottom of the retainer. This will hold the handset in place. 9
Résumé du contenu de la page N° 12
INSTALLINGTHEHANDSETBATTERYPACK 1) Press in on the battery cover release and slide the cover down until it comes off. 2) Install the nickel-cadmium battery with the label facing down. Use only Uniden battery model (BT2499) supplied with your phone. 3) Slide the battery cover on until it snaps into place. 10 !
Résumé du contenu de la page N° 13
INSTALLING AND ADJUSTING CHARGINGTHEBATTERYPACK Initial battery charging Before plugging the phone line into your new phone for the first time, fully charge the battery pack for 12-15 hours without interruption. 1) Place the handset on the base. 2) Make sure that status LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts. Charging optional battery packs The base unit of your phone is equi
Résumé du contenu de la page N° 14
Low battery indicator When the battery pack is very low and Low Battery needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use,Low Battery flashes. If the phone is in use,Low Battery flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base for charging. CLEANINGTHEBATTERYCONTACTS To maintain a good charge, clean all charging contacts on the handset and base about once a mo
Résumé du contenu de la page N° 15
INSTALLING AND ADJUSTING ADJUSTINGTHEHANDSETVOLUMECONTROLS Handset ringer volume When the phone is in standby mode, pressing the vol or key on the handset selects the handset ringer volume. There are two ringer volume settings; high and low. To select the high volume setting, press vol . The handset displays Ringer High Ringer High. To select the low volume setting, press vol . The handset displays Ringer Low Ringer Low. Handset earpiece volume There are four volume settings for the h
Résumé du contenu de la page N° 16
INSTALLINGTHEBELTCLIP To attach the beltclip 1) Remove the slot cover. If you have wall mounted the base, you must remove the beltclip to charge the handset with display showing. 2) Insert the beltclip into the empty slot and press down until it clicks. To remove the beltclip 1) Pull back on the release tab and pull the beltclip up. 2) Replace the slot cover. You can store either the beltclip or slot cover on the bottom of the base. 14 !
Résumé du contenu de la page N° 17
USING YOUR PHONE HEADSETINSTALLATION Your phone may be used with an optional headset, the Uniden HS910. To use this feature, simply insert the headset plug into the headset jack. Your headset is ready for hands-free conversations. Use only the Uiniden HS910 headset specifically designed for Spread AUTOMATICDIGITALCODESECURITY Spectrum Phones. You will hear a buzz or hum on To prevent other parties from making unauthorized calls on your other headsets. phone line, a digital code was added to the
Résumé du contenu de la page N° 18
Using Your New Phone MAKINGANDRECEIVINGCALLS HandsetOnBase HandsetOffBase 1) Pick up the handset. 1) Press any key. To answer 2) If not in Autotalk Mode, 2) If not in Autotalk Mode, a call press talk. press talk. 1) Pick up the handset. 1) Press talk. 2) Press talk. 2) Listen for the dial tone. 3) Listen for the dial tone. 3) Dial the number. To make 4) Dial the number. a call OR OR Dial the number, then Dial the number, then press talk. press talk. Press talk, or return the handset to the To ha
Résumé du contenu de la page N° 19
USING YOUR PHONE STORINGAPHONENUMBERINMEMORY 1) Remove the handset from the base. NOTE 2) Press and hold memory until the Memory Store Whenever you are using a confirmation tone sounds. The following 1> menu screen, you must press screen appears. 2 a key within 20 seconds or the phone will return to standby. You may also press 3) Use the : and; keys or number keypad to choose the memory memory to exit a memory location where you would like to enter a number. menu at any time. 4) Press select. Th
Résumé du contenu de la page N° 20
EDITINGAPHONENUMBERINMEMORY Follow these steps to edit a phone number that you have already programmed into memory. NOTE Whenever you are using a 1) Remove the handset from the base. menu screen, you must press 2) Press and hold memory until the Memory Store a key within 20 seconds or confirmation tone sounds. The display the phone will return to 1>SMITH JOHN shows the Memory Store screen and any standby. You may also press 2 UNIDEN saved numbers. memory to exit a memory menu at any time. 3) Use
