Résumé du contenu de la page N° 1
SS E15+1
Series Owner's Manual
OWNER'S MANUAL
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Contents Welcome/Features ............................................................2 Selecting a Different Channel.......................................20 Controls and Functions....................................................3 Find Handsets ..............................................................20 Terms Used in this Manual...............................................4 Using Call Waiting ........................................................21 Getting Started Visual Message Wai
Résumé du contenu de la page N° 4
Congratulations on your purchase of the Uniden dual handset cordless Welcome telephone. This cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for Features explanation purposes. • 2.4GHz Extended Range • Name Tag* (POP ID) Technology • 10 Speed Dial Memory • Dual Handset System (Extra • One-Touch Emergency Dial Handset & Charger Included
Résumé du contenu de la page N° 5
Controls and Functions 1. Handset antenna 2. Audio boost switch (p. 19) 3. Volume/ (ring)/+ key (p. 19/16) 4. Volume/ (ring)/- key (p. 19/16) 5. Handset battery compartment 6. Handset visual ringer LED 7. Handset earpiece 8. LCD display 9. CID key (p. 29) 10. Redial/pause key (p. 19/ 25) 11. /tone/ key (p. 24) 12. Memory key (p. 23) 13. Menu key (p. 13) 14. Talk key (p. 17) 15. Emergency ( ) key (p. 22) 16. Flash key (p. 21) 17. / key (p. 24) 18. Delete/transfer key (p.
Résumé du contenu de la page N° 6
24. DC in 9V jack 25. Telephone line jack 26. Visual ringer switch (p. 8) 27. Ringer tone button (p. 16) 28. Ringer volume adjuster (p. 16) 29. Ringer on/off switch (p. 16) 30. Base speaker 31. Base visual ringer LED 32. Base antenna 33. Charge/in use LED (p. 7) 35 34. Find handset key (p. 20) 35. Base charging contacts 38 36. Charging contacts 36 37. Charge LED 38. DC IN 9V jack 37 Terms Used in this Manual • Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The
Résumé du contenu de la page N° 7
GETTING STARTED Installing the Phone Do the following steps: A. Choose the best location B. Install the Rechargeable Battery Packs into the Handsets C. Connect the base unit and charging cradle and charge the handsets D. Set the visual ringer brightness (optional) ! If your home E. Mount the base unit on a wall (optional) has specially wired alarm A. Choose the best location equipment When choosing a location for your new phone, here are some important guidelines you should connected to co
Résumé du contenu de la page N° 8
B. Install the Rechargeable Battery Packs into the Handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle. 1) Locate the separate battery and battery cover. Use only the Uniden 2) Plug the battery pack connector (red & black wires) into rechargeable the jack inside the battery compartment. (The connector battery pack notches fit into the grooves of the jack only one way.) (BT-90
Résumé du contenu de la page N° 9
GETTING STARTED C. Connect the Base Unit and charging cradle, and Charge the Handsets 1) Connect each AC adapter to the DC in 9V jack and to each standard 240V AC wall outlet. • Connect each AC adapter to a continuous ! Use only the power supply. supplied AAD--041S • Place the base unit close to the AC outlet AC adaptor so that you can unplug the AC for the base adapter easily. and AAD- Route the cord 600S AC 2) Place one handset in the main base and the adaptor for other in the charg
Résumé du contenu de la page N° 10
5) Once the handset battery packs are fully charged, connect the telephone cord to the tel line jack and to a telephone outlet. If your telephone outlet isn't Australia modular, contact your telephone Tel Line adaptor (supplied) company for assistance. 6) After the phone is connected, pick up the handset from the base and press talk. If you do not get a dial tone, check the following: • Be sure the telephone cord is securely connected to both the base and an active telephone jack. • Be s
Résumé du contenu de la page N° 11
GETTING STARTED E. Mount the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Remove the wall mount adapter from the base and snap it into the notches on the If the base unit is bottom of the base. mounted on the 2) Plug the AC adapter to the DC in 9V jack. wall, always put 3) Wrap the AC adapter cord inside the the handset in molded wiring channel as shown. the base with the 4) Plug the AC adapter into a standard CID display 240V AC
Résumé du contenu de la page N° 12
• Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall material where the base unit will be placed. 1) Insert two mounting screws into the wall, (with their appropriate 3mm anchoring device), 100mm apart. Allow about 3mm between the wall and screw heads for mounting the phone. 2
Résumé du contenu de la page N° 13
GETTING STARTED Register Handsets to the Main Base before Using! Whichever handset you choose to charge in the main base will automatically register to the main base. The second handset (charging in the extra charging cradle) MUST ! When you also be registered to the main base before use. Follow the steps charge the below to register the second handset. handsets, Caller ID summary 1) Be sure both handsets are fully charged. screen and the name of 2) Remove the handset from the charging
Résumé du contenu de la page N° 14
When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 11) each time the digital security code is changed. Refer to Make sure to page 33 for details regarding the Digital Security Code. return the handsets to the 2) When there is a power failure for more than one hour: If power cradles after each failure occurs (e.g. due to electrical storm or if the unit is phone call. unplugged during a move), both handsets will need to be re- registered. To
Résumé du contenu de la page N° 15
GETTING STARTED Basic Setup There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Name Tag and Insert 0. CIDCW option can only be set by using Handset 1. If you try Auto Talk :On Name Tag :On to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows in the display while the phone is charging.) AutoTalk, Name Tag and Insert 0 options can be set by using either Handset 1 or Handset 2. Activating AutoT
Résumé du contenu de la page N° 16
1) When the phone is in standby mode, press the menu Auto Talk :On key. The following screen appears. CIDCW :Off Name Tag :On 2) Press the volume/ /- key to select CIDCW. 3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting. 4) Press the menu key and return the handset to the base unit to complete the setting. The handset returns to standby mode. Setting Name Tag (POP ID) The Name Tag feature works with the Caller Display number from Caller ID. You must subscrib
Résumé du contenu de la page N° 17
GETTING STARTED Setting the Insert 0 This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. Auto Talk :On 1) When the phone is in standby mode, press the menu CIDCW :Off key. The following screen appears. Name Tag :On 2) Press the volume/ /- key three times to select Insert 0. CIDCW :Off Name Tag :On 3) Press the select/channel key to toggle Insert 0 On or Off. Insert 0 :Off
Résumé du contenu de la page N° 18
Selecting the Ringer Tone and Volume Base ringer on/off The ringer on/off switch allows you to set the base ringer on or off. If you set the switch to off, you never hear the base ringer tone. Base ringer tone Press the ringer tone button in standby mode to select one of 7 ringer tones. Base ringer volume Slide the ringer volume adjuster to set the base ringer volume. Handset ringer tone and volume Press the volume up key or volume down key (labeled as the volume/ /+ or volume/ /- k
Résumé du contenu de la page N° 19
BASICS Using Your Phone Making and Receiving Calls Making a call 1) Remove the handset from the cradle. Refer to page 13 2) Press the talk key. "Basic Setup" to turn On the 3) Listen for the dial tone. AutoTalk feature if desired. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk key. Receiving a call 1) Remove the handset from the cradle (If AutoTalk is on, the phone will automatically answer the call when you pick it up). 2) If the handset
Résumé du contenu de la page N° 20
Transferring a Call Your cordless phone allows you to transfer outside calls from handset to handset; only one handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use. To transfer a call 1) During a call, press the delete/transfer key. The call will automatically be placed on hold and the transfer tone sounds. 2) When the other handset receives the call, the transfer tone
