Résumé du contenu de la page N° 1
IMPORTANT SAFEGUARDS
HOW TO GET THE MOST ENJOYMENT FROM YOUR NEW COLOR TV SET
Your new Color TV incorporates a host of features designed to give you excellent performance.
In addition, this model utilizes a highly sophisticated Control Microprocessor that can give
you unprecedented convenience and control in the areas of Picture Adjustment, Channel
Tuning, On-Screen Information.
We therefore strongly urge that you read all of these instructions before using your TV for
the first time.
It is espe
Résumé du contenu de la page N° 2
CONTENTS Caution Any changes or modifications in construction of this device which are not expressly approved Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 by the party responsible for compliance could avoid the user’s authority to operate the Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 equipment. Location of Controls . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 3
LOCATION OF CONTROLS CONNECTING EXTERNAL EQUIPMENT AUDIO/VIDEO IN JACK If your receiver has AUDIO/VIDEO IN JACK, connect this JACK to VCR and TV receiver. Select AV by pressing the AV mode selection key on the remote control. Push PLAY key of your VCR. The advantage of this connection is a superior quality of picture and sound during play back. ANTENNA To "RF IN" From Audio/Video Out (VCR) To Audio/Video Input(TV) OR ANTENNA To "RF IN" To Audio/Video Input(TV) From Audio/Video Out (VCR) 5 6
Résumé du contenu de la page N° 4
CONNECTING EXTERNAL EQUIPMENT ANTENNA CONNECTION EARPHONES Antenna The antenna requirements for a good color television reception are more important than those The earphones must have an impedance of between 8 and 32 ohms and have a 3.5mm for black & white television reception. For this reason,a good quality of outdoor antenna is stereo jack plug. strongly recommended. 1. Plug the earphone jack into the earphone socket on the right hand side of the TV. The following is a brief explanation of
Résumé du contenu de la page N° 5
CABLE TV(CATV) CONNECTION VIDEO/AUDIO CONNECTIONS Prior to making any connections to your TV set, be sure to turn the POWER off. A 75 ohm coaxial cable connector is built into the set for easy hookup. For a more detailed understanding of each connection, it is recommended that you read the When connecting the 75 ohm coaxial cable to the set, screw the 75 ohm cable to the instruction manual for each connected component. COAXIAL CABLE CONNECTOR. If you use video or audio equipment placed near the
Résumé du contenu de la page N° 6
REMOTE CONTROL USE TV FUNCTION & OPERATION Connect either Antenna or Cable TV according to "ANTENNA CONNECTION" Correct instruction on page 8. Point at the Remote Control Sensor of the TV set. Insert batteries into the Remote Control unit according to "REMOTE CONTROL USE" The maximum operable distance is approximately 6m from the Remote Control Sensor, and instruction on page 11. not more than 30 to either side of center. Connect the power cord to AC outlet. The operation of the Remote Contro
Résumé du contenu de la page N° 7
ON SCREEN LANGUAGE SELECTION 1) Press the TV MENU button. CABLE TV CHANNEL CONVERSION CHART MENU 2) Press the CHANNEL UP/DOWN button to PICTURE In addition to the normal TV reception from an antenna for VHF (Channels 2-13) and UHF reach LANGUAGE mode. SOUND (Channel 14-69), your TV set is equipped to receive non-scrambled cable TV channels. TIME 3) Press the or VOLUME + button to select the desired SubMid band (A-8, A-5-A-1), Mid band (A-I) Super band (J-W) Hyper band (W 1 - W 28) SETUP l
Résumé du contenu de la page N° 8
BASIS OF "MENU" OPERATION METHOD CHANNEL MEMORY(SET UP) You can execute every operation by pressing CH / buttons and VOL +/- or buttons ANTENNA SELECTION alternately. In this mode, you can change the broadcast mode between "TV" (for regular VHF/UHF If you learn one method, You can easily operate another function by viewing picture. channels) and " CATV " (for cable channels). 1. Pressing these buttons alternately makes 1. Press TV MENU button and move the cursor to "SET UP" option and press VOL
Résumé du contenu de la page N° 9
CHANNEL MEMORY(SET UP) CHANNEL MEMORY(SET UP) AUTO PROGRAM MANUAL MEMORY(channel add/delete) This function allows the channels to be memorized automatically to match the TV broadcasts 1. TO ADD A CHANNEL and cable channels in your area. If you want to add to the memory a channel the TV did not store during AUTO PROGRAM, follow these steps. 1. Press TV MENU button and move the cursor to "SET UP" option and press VOL + or button, then the "SET UP" menu is displayed. Press the 10-Digit Keypad
Résumé du contenu de la page N° 10
CHANNEL MEMORY(SET UP) PICTURE ADJUSTMENT 1 FINE TUNE USING ON-SCREEN MENU You can sequentially select any one of the four possible preferred analogue picture presets. If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during auto program and manual memory. MENU If however the signal is weak or distorted, you may have to fine-tune the channel manually. 1 1 1 1 PICTURE SOUND 1. Press CH / buttons or Press the 10-Digit keypad button to adjust a cha
Résumé du contenu de la page N° 11
PICTURE ADJUSTMENT 2 SOUND ADJUSTMENT You can sequentially select and adjust one of five picture levels. USING ON-SCREEN MENU Contrast, Brightness, Color, Sharpness or Tint There is a choice of five audio settings by using the on-screen menu, the five settings can by viewed in the sequence illustrated. e.g. : Contrast Adjustment. MENU 1 1 1 1 PICTURE Press the TV MENU button. Move the MENU 1 1 1 1 SOUND cursor to SOUND by pressing the CH PICTURE TIME Press the TV MENU button. Move the / bu
Résumé du contenu de la page N° 12
SOUND ADJUSTMENT SOUND ADJUSTMENT EQUALIZER BALANCE You can adjust five frequency ranges to your preference. SOUND MENU MENU MENU 1 1 1 1 1 1 1 1 Press the TV MENU button. Move the PICTURE PICTURE Press the TV MENU button. Move the cursor to SOUND by pressing the CH SOUND SOUND cursor to SOUND by pressing the CH TIME TIME / buttons and press the VOL + or / buttons and press the VOL + or SETUP SETUP button. FUNCTION button. FUNCTION LANGUAGE ENGLISH LANGUAGE ENGLISH : MOVE : SELEC
Résumé du contenu de la page N° 13
SOUND ADJUSTMENT SOUND ADJUSTMENT SURROUND SOUND AVL SOUND MENU SOUND MENU MENU MENU 1 1 1 1 1 1 1 1 Press the TV MENU button. Move the Press the TV MENU button. Move the PICTURE PICTURE cursor to SOUND by pressing the CH cursor to SOUND by pressing the CH SOUND SOUND TIME / buttons and press the VOL + or TIME / buttons and press the VOL + or SETUP SETUP button. button. FUNCTION FUNCTION LANGUAGE ENGLISH LANGUAGE ENGLISH : MOVE : SELECT : EXIT : MOVE : SELECT : EXIT SOUND SOUND 2 2
Résumé du contenu de la page N° 14
SOUND ADJUSTMENT TIME SETTING MTS CLOCK You can set the television’s clock so that the current time will be displayed when you press the USING MTS BUTTON : TV MENU button. Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereo You must set the current time before you can set the automatic On/Off timer. broadcasts and any accompanying SAP (Second Audio Program) such as another language sound track). 1. Press the MTS button MENU 1 1 Depending on the audio sign
Résumé du contenu de la page N° 15
TIME SETTING TIME SETTING ON/OFF TIMER SLEEP TIMER The ON/OFF time lets you use alarm and automatic off function. You can select a time period from 15 through 90 minutes so that the television automatically switches to power-off mode. Press TV MENU button. MENU 1 1 1 1 MENU PICTURE Move the cursor to TIME by pressing the 1 1 1 1 SOUND CH / buttons and press the VOL + PICTURE Press TV MENU button the cursor to TIME SOUND or button. TIME by pressing the CH / SETUP TIME button and press the VOL +
Résumé du contenu de la page N° 16
TIME SETTING TIME SETTING ON TIME CHANNEL NUMBER TIME 4 4 4 4 You can select the channel on which the TV turns on as programmed by ON-TIMER. This function will not work if the TIMER is set to OFF or the current time has not been set. CLOCK AM12:00 Move the cursor to "ON TIME" by CH / SLEEP OFF buttons and press the VOL +/- or TIMER ON TIME buttons to set the time. ON TIME AM07:30 1) Move cursor to ON CHANNEL and CLOCK AM12:00 OFF TIME AM12:00 press VOL + or button the color of ON CHANNEL 2 S
Résumé du contenu de la page N° 17
FUNCTION OTHER USEFUL FUNCTIONS QUICK VIEW Button : BLUE BACK Press QUICK VIEW button on the Remote Control. The previously viewed channel will When no picture signal is inputed, or the signal is weak, the screen reverts to a blue back color. appear on the screen. Press QUICK VIEW again to switch back to the original channel. FUNCTION FUNCTION Repeatedly pressing QUICK VIEW switches between these two channel. BLUE BACK OFF BLUE BACK ON HALFTONE OFF HALFTONE OFF DISPLAY BUTTON : CCD OFF CC
Résumé du contenu de la page N° 18
DVD FUNCTION & OPERATION INTRODUCTION Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 35 36
Résumé du contenu de la page N° 19
Disc Requirements/Copyright Information Remote Control Unit (DVD) 1. OPEN/CLOSE BUTTON Use this button to open/close the disc tray. Pressing this button will while on TV/Video mode will automatically change it to DVD mode. 2. PLAY/PAUSE BUTTON Use this button to play or pause the disc. Pressing this button during play, cause the disc pause if in pause mode it function as the play. Pressing this button will while on TV/Video mode will automatically change it to DVD mode. 3. STOP BUTTON Use this
Résumé du contenu de la page N° 20
Remote Control Unit (DVD) Basic Playback 12. ANGLE BUTTON If a disc includes multi angle information, the user can watch a screen in multi angles. The function is limited to a DVD disc supporting multi angle information. 13. ZOOM BUTTON Use this button to enlarge DVD or DVD screen image up to 4 times. You may also move the image using CH , buttons. 14. TITLE BUTTON Use this button to display the title menu of the loaded DVD disc. This function is disc dependent. A DVD disc may not contain a cont
