Résumé du contenu de la page N° 1
User’s Manual
Résumé du contenu de la page N° 2
About this manual This manual is designed to assist you in using the ix-10 Digital Camera. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition nd 2 Edition, June, 2001 Copyright © Copyright 2001 This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be repro
Résumé du contenu de la page N° 3
Declaration of conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: ♦ This device may not cause harmful interference. ♦ This device must accept any interference received, including interference that may cause undesired operation. Trademark recognition Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp. SmartMedia is a trademark of the Toshiba Corporation Other product names used in this manual are the pr
Résumé du contenu de la page N° 4
EC Declaration of Conformity We Name: FUJIFILM AXIA CO., LTD Address: 17-5 Shibuya 2 Chome, Shibuya-ku Tokyo 150-0002 Japan Declare that the product Product Name: Is in conformity with the following standards Safety: EN60950 EMC: EN55022: 1997 Class B EN50082-1 1997 EN61000-3-2/3 1995, EN61000-4-2/3/4/6/8/11 1995 Following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and 93/68/EEC) and Low Voltage Directive (73/23/EEC)
Résumé du contenu de la page N° 5
Safety and handling precautions Camera information ♦ Do not take apart or attempt to service the camera yourself. ♦ Do not expose the camera to moisture, or extremes in temperature. ♦ Let the camera warm up when moving from a cold to a warm temperature. ♦ Do not touch the lenses of the camera. ♦ Do not expose the lens to direct sunlight for extended periods of time. Battery information ♦ Turn off the camera before installing or removing batteries. ♦ Use only AA alkaline batteries. ♦
Résumé du contenu de la page N° 6
4. Places subject to strong vibrations. 5. Places affected by smoke of steam. 6. Places subject to strong magnetic fields (such as near motors, transformers or near magnets). 7. For long periods in contact with chemicals such as pesticides or next to rubber or vinyl products. 8. Digital cameras like the ix-10 are particularly badly affected by sand. In sandy locations such as beaches or deserts, or in locations where there is wind-borne sand, ensure that the camera is protected. This
Résumé du contenu de la page N° 7
♦ Request regular internal testing and cleaning for your camera. Build-ups of dust in your camera can cause fire or shock. ♦ When travelling overseas, do not place your camera in the check-in baggage. Careless or rough baggage handling at airports may cause internal damage to the camera even when no external damage is evident. ♦ Do not use this device in aircraft or hospitals. The use of this device in an aircraft or hospital can cause malfunctions in the control devices used in aircr
Résumé du contenu de la page N° 8
Table of Contents Chapter 1 ________________________________________ 1 Getting Started____________________________________ 1 Introduction ............................................................................................ 2 Key features & accessories ..................................................................... 3 System requirements............................................................................... 4 Identifying components ......................................
Résumé du contenu de la page N° 9
Résumé du contenu de la page N° 10
Introduction Congratulations on your purchase of the ix-10 Digital Camera! Your camera has been designed to allow you to quickly and easily take quality digital images and to record video clips direct to your PC. You can also play back your digital snaps via your TV. This camera is supplied with five excellent software packages to enable you organise or edit your pictures, and to have hours of fun with different creative templates. The supplied software and drivers along with the USB
Résumé du contenu de la page N° 11
Key features & accessories Features The ix-10 Digital Camera comes with the following advanced features: • 1/3-inch CMOS image sensor • LCD status panel • 24-bit RGB JPEG image format • Image resolution up to 640 x 480 pixels • SmartMedia card (2 MB) image storage • Auto exposure and flash • Bundled software allowing you to perform advanced image manipulation Optional accessories You can purchase bigger SmartMedia cards to increase the capacity of the ix-10 Digital Camera. Please
Résumé du contenu de la page N° 12
System requirements For optimal use with the ix-10 Digital Camera, your computer should have the following minimum system requirements: Hardware requirements • An IBM PC compatible with a Pentium 200 CPU or higher • Hard drive with 20 MB free disk space • A CD-ROM for driver and software installation • USB interface • 32 MB memory • VGA card with DirectX support Additionally, a sound card is recommended. Software Requirements • Microsoft Windows 98SE, Me, Windows 2000 • 800 x 600
Résumé du contenu de la page N° 13
Identifying components Please refer to the following illustrations to identify the components of the ix-10 Digital Camera: Front View Flash Viewfinder Snapshot Button USB Port Video Port Dust Cover Lens Switch 5
Résumé du contenu de la page N° 14
Rear view Power On/off LED Indicator Switch Snapshot Button Viewfinder LCD Strap Hole Display Mode Button Buzzer Hole SmartMedia Strobe/Enter Card Mode Button Compartment Bottom view Battery Tripod Compartment Socket 6
Résumé du contenu de la page N° 15
LCD status display The following illustration shows all LCD status icons available in the LCD display: 1. Auto Flash 2. Frame Counter 3. Flash Mode 4. Self-timer 5. Red-eye Reduction 6. Delete 7. Battery Power Indicator 8. Hi/Lo Resolution The following table explains the meaning of each icon: Icon Meaning The delete image function is enabled. Refer to page 18 for information on deleting images. The flash function. The following options are available by repeatedly pressing the fla
Résumé du contenu de la page N° 16
Installing and removing the SmartMedia card Refer to the following information for installing and removing the SmartMedia card. You must insert the SmartMedia card before you can start taking pictures. Set the main switch to 1. OFF. Open the SmartMedia card 2. cover. Inset the SmartMedia card. 3. Ensure the notched edge is oriented as shown (only use 3.3 V SmartMedia cards). Notched Edge Close the SmartMedia 4. cover. 8
Résumé du contenu de la page N° 17
Inserting the batteries Refer to the following information for inserting the batteries: Set the main switch to 1. OFF. To open the battery 2. compartment cover, slide the cover as shown, then open. Note the battery polarity on 3. the inside cover and insert the batteries. Close the battery 4. compartment cover and slide shut. 9
Résumé du contenu de la page N° 18
Battery display When you insert new batteries into your ix-10 Digital, the battery status icon in the LCD display indicates a fully charged battery. Refer to the following table: Battery icon Meaning The batteries have a full charge. The batteries are almost empty. Replace the batteries with fresh batteries. 10
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
Turning the camera on and off Refer to the following to turn the ix-10 Digital Camera on and off: Slide the on/off switch to 1. ON. Check the current settings 2. in the LED status display. (See LED status display on page7.) To turn the camera off, set 3. the main switch to OFF. Note: If you do not press any button for three minutes, the camera will beep and power off automatically. To turn the camera back on, slide the main switch to OFF, wait for one second
