Résumé du contenu de la page N° 1
B W CCD CAMERA
INSTRUCTION MANUAL
BW-4302 SERIES
[ ]
SALES NETWORK
SAMSUNG TECHWIN CO., LTD SAMSUNG OPTO-ELECTRONICS AMERICA INC.
40 SEAVIEW DIRVE, SECAUCUS N.J
OPTICS & DIGITAL IMAGING DIV.
07094, U.S.A.
145-3, SANGDAEWON 1-DONG, JUNGWON-GU,
SUNGNAM, KYUNGKI-DO, KOREA
TEL : 209-902-0347
462-121
FAX : 201-902-9342
TEL : 82 -031-740 - 8137~41
FAX: 82 -031-740 - 8145
P/ NO.: 6806-0344-01A
www.samsungcamerausa.com
Printed in Korea
www.samsungtechwin.com
crecom 01.11
www.samsungcctv.co.kr
SAMSU
Résumé du contenu de la page N° 2
Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order that you can understand this manual thoroughly, we'll introduce our model description. BW-4302 Series • EIA models • CCIR models BW-4302EA BW-4302CA BW-4302CH Model Description BW-4302 x x power source signal system • Signal System E EIA Model C CCIR Model • Power Source A AC 24V ~ D DC 12V H High Voltage (CCIR Model: AC 2
Résumé du contenu de la page N° 3
CAUTION RISK OF ELECTRIC SHOCK WARNING- TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OPEN DO NOT EXPOSE THIS CAMERA TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, INFORMATION-This equipment has been tested and found to DO NOT REMOVE COVER (OR BACK), comply with limits for a Class A digital device, pursuant to part NO USER SERVICEABLE PARTS INSIDE. 15 of the FCC Rules. These limits are designed to provide REFER SERVICING TO QUALIFIED reasonable protection against
Résumé du contenu de la page N° 4
Automatic Backlight Compensation Electronic Iris PRECAUTIONS ........................................................................ 6 Electronic iris shutter is automatically The backlight compensation technology allows controlled at the speed of GETTING TO KNOW YOUR CAMERA..................................... 7 the camera to find the best picture conditions 1/60~1/100,000sec (EIA models), Front ....................................................................................... 7 in a
Résumé du contenu de la page N° 5
Do not install the camera in extreme Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to strong temperature conditions. environment where the humidity is high. them to physical shocks. light directly. Do use the camera under conditions where It can cause the image quality to be poor. It can cause malfunctions to occur. It can damage the CCD. temperatures are within -10 C to 50 C. Especially be careful for ventilation under Do not expose the came
Résumé du contenu de la page N° 6
Getting to Know Your Camera C-Mount Lens Adapter Glass Protecting Cap Tripod Mounting Hold Used to install the camera on an optional tripod. The tripod must be equipped with the screw specified as shown below Back Focus Lock Screw 1/4 -20 UNC (20 THREAD) L: 4.5mm 0.2 mm (ISO standard), or 0.197 (ASA standard) L CS-Mount Lens Adapter You can remove and install this bracket on the top of the camera. You must use the supplied screw or the equivalent (within 5mm). If not, it can cause malfunctio
Résumé du contenu de la page N° 7
Getting to Know Your Camera Getting to Know Your Camera Accessories IRIS Mode Selection Switch. Video Out Jack IRIS lens plug BLC Function select Switch Auto Iris Lens Connector LEVEL Adjustment V.R (Using DC Iris Lens Only!) L-Wrench SYNC Mode selection switch Power Input Terminal Notes:There is no Sync selection Notes: Each model has the different switch on the rear of DC power type. power source. V.PHASE Adjustment V.R Notes: There is no V.PHASE VR on the rear of DC power type. Instr
Résumé du contenu de la page N° 8
Controls and Adjustments Glass Protecting Cap SYNC Mode Selection Switch Be sure to cap the lens mount when the lens is not mounted. Pull out the Used to choose INT or LL mode. cap to remove. SYNC (Synchronization) Mode INT(Internal) mode : The camera may be operated independently with its C-Mount Lens Adapter Used to mount a C-mount lens. Remove it to mount a CS-mount lens. Turn internal crystal control. counterclockwise to remove. LL(Linelock) mode : It synchronizes the video signal betwee
Résumé du contenu de la page N° 9
Controls and Adjustments MANUAL LENS Monitor picture Adjustment direction When manual lens is mounted, two modes are available. To make it brighter Turn clockwise In VIDEO or DC mode, electronic shutter is fixed in “1/60” sec(EIA models), To make it darker Turn counterclockwise “1/50” sec(CCIR models). Notes : This function is activated when being in the ESC mode. In ESC mode, electronic shutter is automatically controls the shutter speed from “1/60” to “1/100,000” sec(EIA models), “1/50” t
Résumé du contenu de la page N° 10
CONNECTION 3. Remove the cover from the connector pin supplied, and solder the lens cable to the connector pin as shown Lens is not supplied with this camera. Purchase a lens suitable for below. your environment. This camera accepts auto iris lens, both C- and • Video type : CS-mount lens. No. 1 Pin --- Red (Power source, DC 12V, 40mA MAX) No. 2 Pin --- N.C Notes: No. 3 Pin --- White (Video signal) If the lens is stained with fingerprint or something, the image quality No. 4 Pin --- Black
Résumé du contenu de la page N° 11
CONNECTION CONNECTION 5. Connect the lens plug to the auto iris connector on the rear of the camera. 1. Remove the protecting cap and C-mount adapter. 6. Set the IRIS Mode selection switch to Video according to the type of the lens. C-Mount Lens Adapter. Glass Protecting Cap. 2. Attach the lens into the camera by turning clockwise. After removing the protecting cap, attach the lens into the camera by turning clockwise. Notes: • Use the lens under the specification aside. • Otherwise the l
Résumé du contenu de la page N° 12
CONNECTION CONNECTION Each model has the different power source and the operation characteristics. Connect the VIDEO out jack to the monitor video in jack. Make sure the power is supplied to the appropriate power terminals on the camera. Connect the power as referred on the following figures. CCD Camera Monitor AC24V, 60Hz : BW-4302EA • As a connecting method varies according to instruments, AC24V, 50Hz : BW-4302CA refer to the manual supplied with the instrument. • Connect the cable after pow
Résumé du contenu de la page N° 13
If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the problem, contact an authorized technician. ITEM BW-4302EA BW-4302CA BW-4302CH Problem Solution POWER SOURCE AC24V, 60Hz AC24V, 50Hz AC230V, 50Hz POWER CONSUMPTION 4W 4W 4W Nothing appears • Check that the power cord and line connection on the screen. between the camera and monitor are made properly. INT/Linelock • Check that the VIDEO/ESC selection switch on the seclectable INT/L
Résumé du contenu de la page N° 14
DECLARATION OF CONFORMITY Application of Council Directive(s) 89/336/EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment Black & White CCD CAMERA Model Name BW-4302CA/BW-4302CH Beginning Serial NO. M1120001 Year of Manufacture 2001 Conformance to EN 60065 EN 55 013 EN 50 082-1 We, the undersigned, hereby dec
