Résumé du contenu de la page N° 1
INSTRUCTION
MANUAL
Intense-IR Camera
CVC5815DNV / CVC5815DNVW
CVC5915DNV / CVC5915DNVW
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 6/20/2012
Résumé du contenu de la page N° 2
Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation ..................................... 6-8 ◑ Specifications .............................................. 9, 10 ◑ Camera Dimension ..................................... 11 ◑ OSD Menu Details .
Résumé du contenu de la page N° 3
Precautions Do not install the camera in Do not install the camera under Do not touch the front lens of the extreme temperature conditions. unstable lighting conditions. camera. Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when
Résumé du contenu de la page N° 4
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SER VICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Résumé du contenu de la page N° 5
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do
Résumé du contenu de la page N° 6
Package Contents Please make sure that the following items are included in the Package: 1) CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW • 1 Video Test Connector, Power Jack • 1 3Axis Bracket Round Base Adaptor • 2 Wrenches • Set Screw - 4 Tapping Screws 4x25 - 4 Hexagon Socket Screws M5x10 - 5 -
Résumé du contenu de la page N° 7
CAMERA INSTALLATION - 6 -
Résumé du contenu de la page N° 8
CAMERA INSTALLATION Compatibility 1) CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW CVCJBB INTJBS INTCM - 7 -
Résumé du contenu de la page N° 9
CAMERA INSTALLATION 1. CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW WALL 3AXIS BRACKET ROUND BASE ADAPTOR CAMERA ASSEMBLY TAPPING SCREW 4x25, 4EA HEXAGON SOCKET SCREW M5x10, 4EA - 8 -
Résumé du contenu de la page N° 10
Intense - IR Bullet Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in 35pcs CVC5815DNV ■ ■ CVC5815DNVW 600TV Lines DC Auto Iris Varifocal Lens(2.8mm-12mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs * 35pcs Heater 4EA IR LED's 35EA & Heater's 4EA SPECIFICATIONS MODEL CVC5815DNV / CVC5815DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace
Résumé du contenu de la page N° 11
Intense - IR Bullet Camera DC Auto Iris Varifocal Lens(5mm-50mm) / IR LED Built-in 35pcs ■ CVC5915DNV ■ CVC5915DNVW 600TV Lines DC Auto Iris Varifocal Lens(5mm-50mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs * 35pcs Heater 4EA IR LED's 35EA & Heater's 4EA SPECIFICATIONS MODEL CVC5915DNV / CVC5915DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace Sca
Résumé du contenu de la page N° 12
CAMERA DIMENSION 1) CVC5815DNV, CVC5815DNVW, CVC5915DNV, CVC5915DNVW 11.22” 3.70” 5.90” 5.31” 10.62” - 11 - 4.05” 3.54” 3.89” dia
Résumé du contenu de la page N° 13
OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) - 12 -
Résumé du contenu de la page N° 14
How to Set Up the camera menu ● Setup Menu - 13 -
Résumé du contenu de la page N° 15
- 14 -
Résumé du contenu de la page N° 16
- 15 -
Résumé du contenu de la page N° 17
Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT
Résumé du contenu de la page N° 18
3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol is display "- - - -" Lens 1. Move the arrow indicator to LENS using the
Résumé du contenu de la page N° 19
NOTE * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. Lens BRIGHTNESS 100 RETURN 3. Press the RETURN to return to the SETUP menu. Exposure This function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJU
Résumé du contenu de la page N° 20
EXPOSURE SHUTTER AUTO AGC MIDDLE SENS-UP AUTO BLC OFF D-WDR OFF RETURN RET NOTE *Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed from 1/60, FLK, 1/250~1/100,000. →FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric light. If select FLK mode, sense-up does not operate. * AGC(AUTO GAIN CONTROL): A higher gain increases brightness but also increases any noise. OFF : Deactivates the AGC function LOW : Sets automatic gain c
