Instruction d'utilisation Toshiba IK-WB11A

Résumé du contenu de la page N° 1

OneHome

Camera Integration Note

 
  
Manufacturer: Toshiba
Model Number(s): IK-WB11A
OneHome Versions: 4.0.292 and later
Comments:
Document Revision Date: 8/25/2008
OVERVIEW AND SUPPORTED FEATURES
Installing the Toshiba camera can be broken down into the following steps:
1. Install cameras at desired locations, and pull power and Cat5 cabling as needed. Refer to the
Toshiba documentation for mounting details.
2. Connect the cameras electrically to the

Résumé du contenu de la page N° 2

CAMERA CONFIGURATION These cameras integrate with the OneHome software using their factory default settings. If the camera has had any configuration changes then reset it to factory defaults before continuing. 1. Follow the Toshiba instructions to connect the camera to the network and determine the camera’s IP address. 2. Browse to the camera and login as the administrator. Click on Network Settings and set the IP address to be a static IP for integration with the OneHome software. W

Résumé du contenu de la page N° 3

HOMELOGIC CONFIGURATION DETAILS The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details. In the table below: o “”, etc. Type in the desired name for the item. Devices Variable Name Setting Comments Communication Device N/A (See Note 1) N/A (See Note 1) Video Cameras Name (Default: Toshiba IK-WB11A) Device Type Toshiba IK-WB11A Location (Not Required) IP Addres