Instruction d'utilisation Lennox Hearth 43LSBF

Résumé du contenu de la page N° 1

FIREPLACE KITS
AND ACCESSORIES
750,108M
BI-FOLD GLASS DOORS
07/2001
INSTALLATION INSTRUCTIONS FOR LENNOX'S SYMPHONY SERIES BI-FOLD GLASS DOORS
MODELS 38LSBF, 38LSBF-B, 43LSBF, 43LSBF-B, 48LSBF, 48LSBF-B
GENERAL INFORMATION
This door assembly consists of a right and left bi-fold glass panel
assembly factory mounted within an outer frame. Door handles are
attached in place. There are no additional parts that are required to
install the Symphony Series door, all required hardware is provided.
Fir

Résumé du contenu de la page N° 2

Step 2. Locate the Phillips heads of the screws just around the back of the firebox opening at both the right and left sides. The slots of the Estate 48 attachment brackets will engage these screws and be secured in * place by their heads. Back these screws out about an 1/8 of an inch. Door Step 3. Position the Estate 48 attachment bracket within the fireplace opening with their black faces forward and their slots engaged around Detail the screws backed out in the previous step. Snug up two

Résumé du contenu de la page N° 3

ADJUSTMENT FOR DOOR ALIGNMENT The doors are properly adjusted when the top door trim is in a straight, level line and the gap between the doors and the frame is even at the top and bottom. The doors can be adjusted by changing the location of the door inside the frame. The door may need adjustment for several reasons. One would be that the doors do not fully close because they hit in the center of frame. Another would be that there is a noticeable gap in the center between the closed doors.

Résumé du contenu de la page N° 4

LENNOX reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2001 by LENNOX 1110 West Taft Avenue P/N 750,108M REV. N/C 07/2001 Orange, CA 92865 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE