Résumé du contenu de la page N° 1
156999 65/0en 17-03-2006 14:10 Pagina 1
User
manual
Dishwasher
ZDF 121
Résumé du contenu de la page N° 2
156999 65/0en 17-03-2006 14:10 Pagina 2 Content Safety information - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - -4 Programme table - - - - - - - - - - - - - - - - - - -5 Before the first use - - - - - - - - - - - - - - - - -6 Setting the water softener - - - - - - - - - - - - -6 Filling with dishwasher salt - - - - - - - - - - - -9 Filling with rinse aid - - - - - - - - - - - - - - - -10 Adjusting the dosage of rinse aid - - - - - - -10 Loading cutlery
Résumé du contenu de la page N° 3
156999 65/0en 17-03-2006 14:10 Pagina 3 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved
Résumé du contenu de la page N° 4
156999 65/0en 17-03-2006 14:10 Pagina 4 Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components. WARNING! For electrical and water connection carefully follow the instruct
Résumé du contenu de la page N° 5
156999 65/0en 17-03-2006 14:10 Pagina 5 Starting the washing programme: 1. Select a washing programme. 2. Press the Start/Cancel button (corresponding light on). IMPORTANT! Once the programme has started, if you want to change the selection made Start/Cancel you must cancel the washing programme in progress. button Cancel the washing programme in progress: 1. Press and hold the Start/Cancel button until the corresponding light turns off. 2. Release the Start/Cancel button. 3. Turn the pr
Résumé du contenu de la page N° 6
156999 65/0en 17-03-2006 14:10 Pagina 6 Before the first use When using separate special When using tablets that integrate (dishwasher) salt, rinse aid and rinse aid, detergent, salt function detergent: and other additives: - set the water softener there is no need to fill up with special salt or rinse aid. - add special (dishwasher) salt Check whether these detergents are suitable - fill up with rinse aid for your water hardness. Follow the manufacturers instructions. - Set the water hardne
Résumé du contenu de la page N° 7
156999 65/0en 17-03-2006 14:10 Pagina 7 Water hardness Number of flashes of the Adjustment of the water “end of programme” light hardness setting 1) 2) 3) in Clarke in °TH in mmol/l manually electronically 64 - 88 91 - 125 9,0 - 12,5 10 2 level 10 53 - 63 76 - 90 7,6 - 8,9 9 2 level 9 46 - 52 65 - 75 6,5 - 7,5 8 2 level 8 36 - 45 51 - 64 5,1 - 6,4 7 2 level 7 28 - 35 40 - 50 4,0 - 5,0 6 2 level 6 factory 23 - 27 33 - 39 3,3 - 3,9 5 2 level 5 setting 18 - 22 26 - 32 2,6 - 3,2 4 1 level 4 13 -
Résumé du contenu de la page N° 8
156999 65/0en 17-03-2006 14:10 Pagina 8 Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must Press and hold the start/cancel button and turn the Release the button. The be switched off programme selector dial clockwise till the first end of programme programme. Keep the button pressed until the indicator light will flash. programme selector indicator light and the The number of flashes start/cancel indicator light start fla
Résumé du contenu de la page N° 9
156999 65/0en 17-03-2006 14:10 Pagina 9 Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers Unscrew the cap. Only before filling with Using the funnel salt for the first time, provided, pour in the fill the salt container salt until the container is with water filled with salt. IMPORTANT! Water will overflow from the container as salt is added. IMPORTANT! Immediately start a complete programme. Remove any trace of Replace the cap tightly salt. turning it clock
Résumé du contenu de la page N° 10
156999 65/0en 17-03-2006 14:10 Pagina 10 Filling with rinse aid Open the lid. Fill up with rinse aid. Clean up any rinse aid The maximum level for which overflows. Close filling is indicated by the lid and press until it "max". locks. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Top up the rinse aid when the indicator (B) becomes clear. Adjusting the dosage of rinse aid Increase the d
Résumé du contenu de la page N° 11
156999 65/0en 17-03-2006 14:10 Pagina 11 Loading cutlery and dishes The following items are not suitable for use When loading the dishwasher, make sure in the dishwasher: that you: - Remove all left over food and debris. - Cutlery with wooden, horn, china or mother-of-pearl handles - Soften remnants of burnt food in pans - Plastic items that are not heat resistant - Load hollow items such as cups, glasses, - Older cutlery with glued parts that are not pans, etc. with the opening downwar
Résumé du contenu de la page N° 12
156999 65/0en 17-03-2006 14:10 Pagina 12 Load upper basket. For taller items, the cup If plates are to be loaded in the upper Light items (plastic racks can be folded basket: bowls etc.) must be upwards. load them starting from the rear positions; loaded in the upper tilting them slightly forwards and avoiding the basket and arranged so front positions near the door. they do not move. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket
Résumé du contenu de la page N° 13
156999 65/0en 17-03-2006 14:10 Pagina 13 Filling with detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. Open the lid. Observe the dosing Fill in the detergent in levels. compartment A. For programmes with When using detergent Close the lid. prewash add an tablets: additional detergent place detergent tablets dose in compartment B. in compartment A. Unloading the dishwasher IMPORTANT! Empty the lower basket first
Résumé du contenu de la page N° 14
156999 65/0en 17-03-2006 14:10 Pagina 14 Cleaning and care Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. The dishwasher must Clean filters A, B and C Turn the handle about 1 4 be switched off thoroughly under / turn anticlockwise running water. and remove filters B and C. Remove filter A from the Put the flat filter A back Replace the filters and base of the washing in the base of
Résumé du contenu de la page N° 15
156999 65/0en 17-03-2006 14:10 Pagina 15 External cleaning Frost precautions Clean the external surfaces of the machine and Avoid placing the machine in a location where control panel with a damp soft cloth. If the temperature is below 0°C. If this is necessary use only neutral detergents. Never unavoidable, empty the machine, close the use abrasive products, scouring pads or appliance door, disconnect the water inlet pipe solvent (acetone, trichloroethylene etc....). and empty it. Ensure t
Résumé du contenu de la page N° 16
156999 65/0en 17-03-2006 14:10 Pagina 16 Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher, open the door and carry out the following suggested corrective actions. Fault code / malfunction Possible cause Solution The water tap is blocked or furre
Résumé du contenu de la page N° 17
156999 65/0en 17-03-2006 14:10 Pagina 17 The wash results are not satisfactory The wrong washing programme has been selected. The dishes are not clean The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arm do not rotate freely due to incorrect arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used.
Résumé du contenu de la page N° 18
156999 65/0en 17-03-2006 14:10 Pagina 18 Technical data Dimensions Width 60 cm Height 85 cm Depth. 61 cm Electrical connection Information on the electrical connection is given on the rating plate on Voltage - Overall power - Fuse the inner edge of the dishwasher’s door. Water supply pressure Minimum 0,05 MPa (0.5 bar) Maximum 0,8 MPa (8 bar) Capacity 12 place settings Max. weight 41 Noise level 51 dB (A) Consumption values The consumption values are intended as a guide and depends on the pre
Résumé du contenu de la page N° 19
156999 65/0en 17-03-2006 14:10 Pagina 19 Hints for test institutes Testing in accordance with EN 60704 must be Test in accordance with EN 50242 must be carried out with appliance fully loaded and carried out when the salt container and rinse using the test programme (see "Consumption aid dispenser have been filled with salt and values"). rinse aid respectively and using the test programme (see "Consumption values"). Full load: 12 standard place settings Amount of detergent required: 5 g + 25
Résumé du contenu de la page N° 20
156999 65/0en 17-03-2006 14:10 Pagina 20 Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Water connection WARNING! WARNING! The dishwasher must not be connected to Only use, for connection to the water mains, open water appliances or instantaneous water new hose-set; old hose-set must not be heaters. This dishwasher may be fed with reused. either hot (max. 60°) or
