Instruction d'utilisation Woodstock D3038

Résumé du contenu de la page N° 1

Model D3038
REMOTE DUST COLLECTOR SWITCH
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
Introduction
The Model D3038 Remote Dust Collector Switch (Figure
1) allows the operator to turn the dust collector ON/OFF
from a distance of up to 75 feet. Read and understand
this entire document before installation to make sure the
Model D3038 fits the intended application.
Only connect the Model D3038 to a 110V circuit with a
NEMA 5-15

Résumé du contenu de la page N° 2

D3038 Remote Dust Collector Switch Installation 1. Identify a mounting location for the receiver unit that allows the power cord to reach an appropriate outlet and the dust collector power to be plugged into the receiver outlet. Note: You may choose to attach the receiver unit directly to your dust collector. If so, mount it to a portion of the frame that will not compromise the function or strength of the dust collector. Reciever Side 2. Attach the mounting bracket in the chosen locatio

Résumé du contenu de la page N° 3

D3038 Remote Dust Collector Switch 6. Turn the remote control transmitters ON with the ON/OFF switch shown in Figure 5. The LED indicators will light to show the transmitters are working. — If the LEDs don't light, remove the protective ON/OFF Switch covering from the batteries. See Replacing Batteries below to access the batteries. Note: To conserve battery life in the remote control transmitters, only turn them on when they are needed for use. Figure 5. ON/OFF Switch location. 7. Tur