Résumé du contenu de la page N° 1
azur 540D V2
DVD player
User’s manual
2
ENGLISH
Résumé du contenu de la page N° 2
Contents Introduction Thank you for purchasing this Cambridge Audio Azur range DVD player. Introduction .................................................................................................2 We hope that you enjoy many years of pleasure from it. Limited warranty..........................................................................................3 The new 540D V2 was designed from the ground up for the Azur range Safety precautions ..........................
Résumé du contenu de la page N° 3
azur 540D V2 Limited warranty Safety precautions Cambridge Audio warrants this product to be free from defects in Checking the Power Supply Rating materials and workmanship (subject to the terms set forth below). For your own safety please read the following instructions carefully Cambridge Audio will repair or replace (at Cambridge Audio's option) this before attempting to connect this unit to the mains. product or any defective parts in this product. Warranty periods may vary from country to c
Résumé du contenu de la page N° 4
Important safety instructions Please take a moment to read these notes before installing your 540D Power cord protection V2, as they will enable you to get the best performance and prolong the The unit must be installed in a manner that makes disconnection of the life of the unit. We advise you follow all instructions, heed all warnings mains plug from the mains socket outlet (or appliance connector from the and keep the instructions for future reference. rear of the unit) possible. Where the ma
Résumé du contenu de la page N° 5
azur 540D V2 Rear panel connections 9 On Power Off This product complies with DHHS rules 21 CFR, Chapter 1, Video Out Subchapter J, Part 1040 at date of manufacture. 6 7 Class 1 Laser Product Apparatus claims of US patent nos. 4,631,603; 4,577,216; Designed in London, England 4,819,098 and 4,907,093 licensed for limited viewing only. Luokan 1 Laserplaite 5.1 Channel Audio Out Stereo Composite 2 3 5 Klass 1 Laserapparat 4 Out “DTS” is a trademark of Digital Theatre Syst ems Inc. Y azur 540D V2.
Résumé du contenu de la page N° 6
Front panel controls azur 540D DVD Player 4 1 Open Play Standby / On 2 Close Pause Stop Skip 3 5 6 7 8 1 Standby/On Front panel display Switches the unit between Standby mode (indicated by a dim power LED) and On (indicated by a bright power LED). Standby is a low power 1 2 3 4 5 6 mode where the power consumption is less than 10 Watts. The unit should be left in Standby mode when not in use. 2 IR sensor Receives IR commands from the supplied Azur remote control. A clear 8 7 unobstructed line of
Résumé du contenu de la page N° 7
azur 540D V2 Remote control Note: The 540D V2 is supplied with an Azur Navigator remote If Stop is pressed once playback can be resumed control. Insert the 3 supplied AAA batteries to activate. For from the same place by pressing Play. Press Stop twice to further details of the various adjustment functions completely stop playback. If Pause is selected pressing available, refer to the later sections of this manual. the Slow key then allows frame by frame advancement of the paused frame. Open/Clo
Résumé du contenu de la page N° 8
Audio connections Do not plug in the mains power lead or turn the unit on until all 1 Analog Stereo connections have been made. Digital Audio 2 Three types of audio connection can be made between the 540D V2 and 3 Analog 5.1 your stereo/AV system: In In AV receiver 2 1 OR Phono cable (2RCA-2RCA) On Power Off This product complies with DHHS rules 21 CFR, Chapter 1, Video Out Subchapter J, Part 1040 at date of manufacture. Class 1 Laser Product Apparatus claims of US patent nos.
Résumé du contenu de la page N° 9
azur 540D V2 Analog video connections 1 The 540D V2 can output video in both fully digital (HDMI) and analog Component - Connect with 75 ohm Component video cables (3RCA- (Composite, S-Video, RGB/SCART and Component) formats. If your TV 3RCA). set supports HDMI then this is the preferred format (see next section). 2 SCART/RGB - Connect with a dedicated Scart Audio/Video cable. If your TV set supports only analog video the preferred connection is (in 3 S-Video - Connect with S-Video cable. declin
Résumé du contenu de la page N° 10
Surround-sound formats Via its analog outputs the 540D V2 can playback CDs in stereo and Dolby Digital EX DVDs in either stereo or up to 5.1 output when they have been encoded Known also as DD (3/3) or DD 6.1, an enhanced form of Dolby Digital. with Dolby Digital or Dolby Pro Logic / Pro Logic II formats. On top of the discretely encoded 5.1 channels DD EX provides an extra 6th channel (Surround Back, giving 6.1 or 7.1 with mono rear surrounds) Dolby Digital EX 6.1 discs can also be played back
Résumé du contenu de la page N° 11
azur 540D V2 DVD player setup Video Setup menu Press the Setup button on the remote to enter the 540D V2 Setup menus: -- Video Setup Menu -- TV Display PS TV Type PAL Scart / Component Comp HDMI Output On HDMI Resolution Angle Mark On Setup OSD Lang ENG Screen Saver On Go To Video Setup Menu With the Video Setup menu selected, use the and arrows to move up/down to the desired sub-menu. Use the Navigation arrows ( ) to adjust the settings and press the Enter button to conf
Résumé du contenu de la page N° 12
Video Setup menu continued 16:9 Wide - Select this screen when HDMI Setup connected to a widescreen TV set. The full The default setting is ‘Off’. If you can make an HDMI connection to your picture will now normally be displayed TV, turn the HDMI output to ‘On’ and the HDMI resolution choices will with no picture cropping (unless the movie become available. Choose the resolution you desire: itself has black bars recorded into the video). 480p (60Hz) - Progressive format PAL 576p (50Hz) - Progr
Résumé du contenu de la page N° 13
azur 540D V2 Audio setup menus Large = Speakers with an extended low frequency response of approximately 20-40Hz to 16-20kHz (floorstanders or high quality larger stand-mounted speakers). -- Audio Setup Menu -- Speaker Setup Small = Speakers with a less extended low frequency response of SPDIF Output RAW approximately 80-100Hz to 16-20kHz (small stand-mounted, bookshelf LPCM Out 48K or satellite speakers). HDMI Audio PCM PRO Logic II Setting each speaker allows the 540D V2 to pe
Résumé du contenu de la page N° 14
Audio Setup menu continued Dolby Digital Setup menus HDMI Audio Two options are available PCM Stereo and Follow SPDIF. -- Dolby Digital Setup -- When HDMI Audio is set to PCM stereo the HDMI output will be 16/44.1 Dynamic for CDs and 16/48 or 16/96 stereo/stereo downmix for DVD depending Channel Delay on the soundtrack bit depth. When the 540D V2 is connected directly to a TV set able to receive Stereo Audio over HDMI PCM Stereo is the best setting to use. Your TV set will now always
Résumé du contenu de la page N° 15
azur 540D V2 Preference menu Note: To access the Preference menu, the disc tray drawer must be Audio open. Use this to set the default language of the sound output from the speakers. -- Preference Page -- Subtitle Audio ENG Use this to set the default language of the subtitles displayed on the TV. Subtitle ENG Disc Menu ENG Parental Password Default Disc Menu Use this to set the default language of the menus in the disc top menu. Go To Preference Page The Preferences menu
Résumé du contenu de la page N° 16
Basic operating instructions Note: The repeat chapter/title setting will be cleared when moving to Getting started other chapter or title. Turn on the power of the TV, amplifier/AV receiver and any other components which are connected to the DVD player. Make sure the TV A-B Repeat and the audio receiver are set to the correct input channel. 1. Press the A-B button at your desired starting point. ‘A’ appears briefly 1. Press the Open/Close button to open the disc tray. on the TV screen. 2. Place
Résumé du contenu de la page N° 17
azur 540D V2 Custom installation (C.I.) use Troubleshooting IR Emitter Control Bus The 540D V2 features a Control Bus input/output There is no power that allow un-modulated remote control Ensure the AC power cord is connected securely. commands (positive logic, TTL level) to be received electrically by the unit and looped to another unit Ensure the plug is fully inserted into the wall socket and is switched on. if desired. These control commands are typically In In Out Check fuse in the mains pl
Résumé du contenu de la page N° 18
Cambridge Audio Gallery Court Hankey Place London SE1 4BB England www.cambridge-audio.com © 2007 Cambridge Audio Ltd AP20597/1
