Instruction d'utilisation Hollywood Sport Rider HR1000

Résumé du contenu de la page N° 1

Pour instructions en Français, continuer aux pages 6 et 7.
HOLLYWOOD RACKS
Sport Rider Instruction Manual
Model HR1000 –2 Bike Hitch Rack with ratcheting hooks
 Not to be used on any trailer, fifth
wheel or vehicle being towed by
another vehicle
 Weight Limit 45lbs/20 kg per bike
 2 bike maximum capacity
 Optional locking kits available
ID# Description Qty
A MAIN RACK ASSY 1
B SHORT FRAME HOOK 1
C LONG FRAME HOOK 1
D RECEIVER TUBE & SPACER 1
E LEFT SIDE WHEEL TRAY 2
F RIGHT SIDE WHEEL T

Résumé du contenu de la page N° 2

Fig. 1 Assembly & Installation Procedure: Fig. 2 Step 1: Locate holes on main rack assembly, bracket and hardware (Fig. 1) Step 2: Loosely assemble bracket to main rack as shown in Fig. 2 & 3. Bolts (I) inserts through lock washer (L), then flat washer (J), then top plate and into bottom plate Do Not tighten! Step 3: Slide main rack assembly onto Receiver tube as shown in Fig. 4 & 5. Adjust position so that is 3 or 4 inches between the end of the rack and end of the receiver tube. Tighte

Résumé du contenu de la page N° 3

Step 6: Install frame hooks: Step 6A: Installing into a 1 ¼” trailer Slide long frame hook down vertical post facing vehicle. Then slide short frame hook Note: The receiver tube comes onto post, facing away from ready for installation into a 2” vehicle. You should hear be able hitch. If you have a 1 ¼” hitch, to hear the spring loaded lever use the provided hex wrench to engaging the teeth on the post remove the plastic spacer as as shown in fig. 8. Fig. 9 shown in Fig. 9. Place l

Résumé du contenu de la page N° 4

Folding Down Vertical Post For easy access to the cargo area, the vertical post can be folded down. To fold down vertical post, rotate and remove the side-retaining pin as shown in Fig. 16a-16d. Be sure to re-tighten the thumbscrew after replacing pin. 16a 16c 16d 16b Folding Up the Wheel Holders To fold up the wheel holders, rotate and remove the front retaining pins. Then rotate the tube up and re-install the pins. See Fig. 17a &17b 17a 17b 4

Résumé du contenu de la page N° 5

Installing Bikes on the Rack Pre-position the wheel trays to fit the bike’s wheel base (center to center distance between the wheel axels) such that they are directly beneath each wheel. To adjust the wheel trays, loosen the knobs and slide along the wheel holder support tube. Tighten knobs securely. To fit the first bike (closest to the vehicle) more easily, the vertical post may be tilted down (away from vehicle). To do this, simply remove the side retaining pin per. Note: Never fold down

Résumé du contenu de la page N° 6

Hollywood Sport Rider. Modele HR1000 Porte-vélo pour atelage remorque pour 2 vélos. e pas utiliser ce produit sur une remorque ou un véhicule qui est remorqué. Li mite de poids par vélo de 45lbs ou 20 kgs apacité maximum 2 vélos Ref Description des pièces Quantité A Cadre principal 1 B Crochet court 1 C Crochet long 1 D Tube pour l’attelage remorque 1 E Support roue gauche 2 F Support roue droite 2 G Boulon pour extremite de D 1 H Attache inferieure 1 I Boulons de 8mm 4 J Rondelles 4 K Clefs de

Résumé du contenu de la page N° 7

Inclinaison du mât central. For un accès facile a la porte arrière, le mât central s’in cline en tournant et en enlevant la broche . comme sur Fig 16a-16d. Assurez vous de reserrer la vis après avoir redresser le mât. Rangement des support de roues Pour ranger les supports de roues, tounez et enlevez les broches de devant. Fig 17a & 17b. Installation des vélos sur le Porte-vélo Pré-positioner les supports de roues E et F à la distance du centre de chaque roue de chaque vélo. Pour ajuster les

Résumé du contenu de la page N° 8

Final Step: Install wheel tube stop screws: After you have installed the bikes on the rack and are comfortable with the positions of the wheel holders, the stop screws can be installed. Locate items P from hardware bag. Thread them into the hole located on the bottom of wheel tubes (Fig. 20), and tighten with a flat edge screwdriver. The screws are removable. Fig. 20b Fig. 20a Optional accessories for your Sport Rider Locking Threaded hitch pin with Double check before driving off: secur