Résumé du contenu de la page N° 1
Owner’s Guide
Guía de usario
Notice d’utilitsation
®
A mark
of quality
Résumé du contenu de la page N° 2
Safety Information WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or moisture. WARNING: This apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids in any part of the system. Liquids can cause a failure and/or a fire hazard. CAUTION CAUTION AVIS VIS RISK OF ELECTRICAL SHOCK RISQUE DE CHOC ÉLECTRIQUE DO NO
Résumé du contenu de la page N° 3
English Español Français Contents Where to find… Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Selecting compatible discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Check for region code compatibility .
Résumé du contenu de la page N° 4
Contents Controlling Other Audio Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Setting up your remote to control other audio/video devices . . . . . . . . . . . . . . . . . . . . . . . . . 35 Direct entry of a device code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Searching for a device code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 5
English Introduction Before you begin ® Thank you for purchasing the Bose 3•2•1 Series II or 3•2•1 GS Series II DVD home entertainment system, which offers superb sound, elegance, and simplicity in an advanced home audio setup. Using Bose proprietary signal processing technology, the 3•2•1 Series II systems provide improved spaciousness from stereo recordings, and bold movie effects from surround-encoded materials. Yet its few parts require little effort to set up, so you can enjoy your new
Résumé du contenu de la page N° 6
Introduction Glossary of terms Aspect Ratio – The shape of the rectangular picture in a TV set. It is the width of the picture relative to the height. Our standard TV picture, in terminology used by that industry, is 4 units wide by 3 units high, or 4:3 (read as 4 by 3) in aspect ratio. There are currently two standard TV aspect ratios, 4:3 and 16:9. Chapter – In DVD-Video, a division of a title. Technically called a part of title (PTT). Component Video – A video signal split into three parts
Résumé du contenu de la page N° 7
English Introduction PCM – An uncompressed, digitally coded representation of an analog signal. This is the form of the digital audio signal used for both CD and laserdisc. It is a serial data stream that is coded for transmission or recording. PCM is also used for many other types of serial data communications. S-video – A video interface standard that carries separate luminance and chrominance signals, usually on a four-pin mini-DIN connector. Also called Y/C. The quality of S-video is si
Résumé du contenu de la page N° 8
System Setup Unpacking Carefully unpack your system. Save all packing materials, which provide the safest way to transport your system. Check to be sure your system includes the parts shown in Figure 1. If any part of the system appears damaged, do not attempt to use it. Notify Bose or your ® authorized Bose dealer immediately. For Bose contact information, refer to the address sheet included in the carton. WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of ch
Résumé du contenu de la page N° 9
English System Setup Selecting locations for your 3•2•1 Series II system components Use the following guidelines and Figure 2 to choose locations and positions for the compo- nents of your 3•2•1 home entertainment system. Note: While these guidelines are offered to help provide great system performance, you may find other placement choices that are more convenient and provide the sound you enjoy. Placing the media center CAUTION: Do not block any ventilation openings. For reliable operation of
Résumé du contenu de la page N° 10
System Setup Placing the speakers Choosing a good location for the speakers will allow you to experience the audio surround effects that your 3•2•1 home entertainment system is designed to deliver. • Place the two speakers either on top of the TV or at equal distance from the left and right of the TV screen (Figure 2). Keep both speakers at approximately the same height. • Place each speaker within 3 feet (1 meter) of the edge of the TV screen. Placing the speakers more than 3 feet away from
Résumé du contenu de la page N° 11
AC NPUT I MUSICCENTER English System Setup ® Placing the Acoustimass module ® • Place the Acoustimass module within reach of the cable from the music center and an AC (mains) power outlet. • Place the module at the same end of the room as the TV and the speakers (Figure 4). • Keep the module at least 3 feet (1 meter) away from the TV to prevent the module from interfering with the TV screen. Figure 4 Recommended Acoustimass module placement 3 ft (1 m) minimum • Attach the medium-sized rubber
Résumé du contenu de la page N° 12
System Setup Making system connections ® CAUTION: Do not plug the Acoustimass module into an AC power (mains) outlet until all the components are connected. Note: If additional audio cables or longer cables are needed to make these connections, contact Bose Customer Service. Refer to the list of offices included in the product carton. Connecting the Acoustimass module to the media center Plug one end of the Acoustimass module cable into the Acoustimass Module jack on the rear of the media cen
Résumé du contenu de la page N° 13
English System Setup 2. At the other end of the speaker cable, separate the left and right speaker cords as much as necessary to reach each speaker (Figure 8). Figure 8 Note: If you purchased a 3•2•1 GS Series II system, the left and Separating left and right right speaker cable connectors speaker cords will be marked with a “GS”. 3. Plug the LEFT speaker cable into the rear jack of the left speaker (Figure 9). Plug the RIGHT speaker cable into the rear jack on the right speaker. Figure 9
Résumé du contenu de la page N° 14
System Setup Connecting the supplied antennas The rear panel of the media center provides jacks for the AM and FM antennas included with your system (Figure 10). Unwind the wires for each antenna to provide the best reception. Figure 10 Antenna connections Note: An outdoor antenna may be used in place of the supplied indoor antennas. To add an outdoor antenna, consult a qualified installer. Follow all safety instructions sup- plied with the antenna. FM dipole antenna Media center AM loop a
Résumé du contenu de la page N° 15
English System Setup Connecting your TV to the media center Note: If you will be using the 3•2•1 system with both a TV and a VCR, skip this section and go to “Connecting your TV and VCR to the media center” on page 16. Making audio connections Note: If your TV does not have audio output jacks, see “If your TV does not have audio output jacks” on page 17. Otherwise, continue. 1. Connect one end of the supplied stereo cable to the TV Audio IN jacks on the rear panel of the media center (Figure
Résumé du contenu de la page N° 16
System Setup Connecting your TV and VCR to the media center Note: There are two options for connecting your TV and VCR to the media center. Before you proceed, you must determine if your TV has audio output jacks. Consult your TV owner’s guide if you need assistance. If your TV has audio output jacks If your TV has audio output jacks, you can directly route the TV audio to the 3•2•1 home entertainment system (Figure 12). 1. Connect one end of the supplied stereo cable to the TV Audio IN jacks
Résumé du contenu de la page N° 17
English System Setup If your TV does not have audio output jacks If your TV does not have audio output jacks, you will need to feed audio to the 3•2•1 home entertainment system through a secondary source, such as a VCR. To do this, you will need one additional video cable, which can be purchased at your local electronics store. 1. Connect one end of the supplied stereo cable to the AUX Audio IN jacks on the rear panel of the media center (Figure 13). Insert the white RCA plug into the AUX whi
Résumé du contenu de la page N° 18
System Setup VCR considerations • Some combination TV/VCR units may not work with 3•2•1 Series II home entertainment systems. Please refer to your TV/VCR owner’s manual for information. • A stereo VCR is required for optimal sound performance. If your VCR has only one audio output and is not labeled Stereo or Hi-fi, you have a mono VCR. You will need a Y-adapter cable (available at electronics stores) to connect audio to the media center. For this setup, you will need to select “Mono decodin
Résumé du contenu de la page N° 19
English System Setup Making component video connections (highest quality video) Note: Component video connections are required in order to use the progressive scan feature of your 3•2•1 system. Your TV must also support this feature. To turn on the progressive scan fea- ture, see “Video options” on page 47. For the highest quality video from DVDs, you may want to use a component video connection between the media center and the TV. To do so, your TV must provide component video jacks (typical
Résumé du contenu de la page N° 20
System Setup Connecting digital audio devices Some audio devices may feature a digital audio output for optimum sound performance. Use an optical digital cable or a coaxial digital cable, as appropriate, to connect this output to the digital input on the media center. You can purchase the required cables at a local electronics store. On the media center rear panel, an optical digital cable connects to the OPTICAL jack. A coaxial cable connects to the audio input jacks labeled D. Note: The di
