Résumé du contenu de la page N° 1
Operating Instructions
DVD Recorder
Model No. DMR-EX95V
PAL NTSC
TM
This DVD Recorder is for viewing and recording free to view channels
only, not pay TV or encrypted channels.
Read the operating instructions, the safety precautions, and the
information on setting up the unit on page 3 thoroughly before you
connect, operate or adjust any settings on the unit.
Trademark of the DVB Digital Video Broadcasting Project (1991 to 1996)
th
Declaration of Conformity No.3955, 12 January 2006
Résumé du contenu de la page N° 2
Table of contents Page Page Page Safety precautions 3 Delayed playback 29 Stopping a current Timer Recording 48 Quick View 29 Automatic title transfer 48 Information about the unit 4 Simultaneous recording and playback 29 Licence information 4 Changing the audio channel 29 Delete (DELETE Navigator) 49 Copy (COPY Navigator) 49 Before you start 5 Playback (VHS) 30-31 Included Accessories 5 Preparation 30 Timer Recording 50 Inserting batteries 5 Playing a video cassette 30 Manual programming 50 Re
Résumé du contenu de la page N° 3
Safety Precautions Voltage: Only use power sources complying with the specifications for this device. AC mains lead protection: Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Service: Never attempt to repair this unit by yourself. If a problem occurs that is not described in these operating instructions, disconnect the power supply and contact your dealer or an authorised after sales service centre. Install th
Résumé du contenu de la page N° 4
S N O I T C N U F E D I Information about the unit DVB-T This unit is a DVD Recorder with integrated tuner. You can receive and record both analog and terrestrial digital channels (DVB-T) without an additional reception unit (Set Top Box). DivX-compatible DivX files can be played back from CD-R/CD-RW and DVD-R. GUIDE The TV Guide gives you a preview of the TV programmes for the next 7 days from your digital stations. Simply select each programme to store it for Timer programming. 35 Menu FUN
Résumé du contenu de la page N° 5
S N O I T C N U F E D I Before you start Dear customer Thank you for your trust and your decision to purchase this top-quality unit. Panasonic is one of the leading manufacturers of entertainment electronics units. We are sure that you will be completely satisfied with this unit. Matsushita Electric Industrial Co., Ltd. http://www.panasonic.co.jp/global/ Included Accessories DVD/VHS TV Remote Control AC mains lead + VOLUME DRIVE CH SELECT _ AV EUR7659YP0 RJA0043-1C TRACKING/V-LOCK/PAGE 1 2 3
Résumé du contenu de la page N° 6
Remote Control Point the remote control at the sensor of the unit. Avoid obstacles along the transmission path. The maximum reach of the remote control is 7 metres directly in front of the unit. Make sure that the transmission window and the sensor on the unit are clean. The process can be impaired by direct sunlight and glass cabinet doors. Child protection 7 m You can lock the buttons on the unit and the remote control. Remote control ! signal sensor Press and hold the RETURN and ENTER but
Résumé du contenu de la page N° 7
S S N N O O I I T T C C N N U U F F E E D D I I Remote Control TV DVD/VHS Standby/on switch DVD/VHS Switch the TV on and off. Press to switch the unit from on to TV AV Select the AV input on the TV set. standby mode or vice versa. In standby + VOLUME mode, the unit is still consuming a small DRIVE + CH SELECT _ VOLUME CH = Select the programme position on the TV set. AV CH amount of power. _ VOLUME = TV volume control. TRACKING/V-LOCK/PAGE DRIVE DRIVE SELECT TRACKING/V-LOCK/PAGE SELECT 1 2 3
Résumé du contenu de la page N° 8
Front Panel Display Disc Tray Cassette Compartment SD Card slot RECORDING D HDD DVD SD VHS 2 5 11 9 10 3 4 2 6 7 8 12 1 Standby/on switch /I : Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Switching this unit into standby mode does not disconnect it from the mains. 4 1 2 3 EJECT: Eject the cassette. Forward/rewind Standby/on switch Channel select button OPEN/CLOSE: Open and Search during playback. close th
Résumé du contenu de la page N° 9
Rear Panel RF IN AV OUT COMPONENT VIDEO OUT Y L P S VIDEO OUT B OPTICAL VIDEO OUT R PR RF OUT AUDIO OUT AC IN AV 2 (EXT) AV 1 (TV) 5 11 1 2 3 4 6 7 8 9 10 1 2 AC IN~ = Power supply OPTICAL Digital audio output Connection for the AC mains lead. 3 4 L HDMI AV OUT Audio output, right/left channel Digital audio output R AUDIO OUT 5 6 AV2 (EXT) = 21-pin Scart terminal Video output VIDEO OUT External unit connection AV2 (EXT) 7 8 S VIDEO OUT AV1 (TV) = 21-pin Scart terminal S VIDEO output terminal
Résumé du contenu de la page N° 10
Connections Connections Select the connection pattern that matches your environment from patterns A-E. Choose from one of the connection types A-E that suits your requirement. Before connection, turn off all connected equipment and read the appropriate operating instructions. Use of the supplied RF coaxial cables To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial cables when you connect this unit to your TV and aerial outlet or aerial cable, as shown
Résumé du contenu de la page N° 11
Auto Setup Automatic setup of the unit After being switched on for the first time, the unit proceeds with an automatic station search for digital channels. This is followed by the search for analogue channels. ! Turn on the television and select the AV input that this unit is connected to. ! Switch the unit on using the Standby/on-switch. DVB Auto-Setup (Tuning digital channels) 1 DVB Auto-Setup Depending on different countries or regions, the digital TV programme has its own selection of op
Résumé du contenu de la page N° 12
Connecting to a television and satellite receiver B Television’s rear panel To household mains socket AV IN 4 Fully wired 21-pin 2 Scart cable (For Q Link functions) This unit’s rear panel RF IN AV OUT COMPONENT VIDEO OUT Y L PB S VIDEO OUT OPTICAL VIDEO OUT R P R RF OUT DIGITAL AUDIO OUT AUDIO OUT AC IN (PCM/BITSTREAM) AV 2 (EXT) AV 1 (TV) To household mains socket (AC 220 V to 240 V, 50 Hz) AC mains lead (included) 4 Connect only after all other connections are complete. Fully wired 21-pin 3
Résumé du contenu de la page N° 13
Connecting to a television and satellite receiver B Connection of Set Top Box or satellite receiver If you receive your television programme via a satellite receiver (digital/analogue), connect your DVD Recorder as a downstream unit. If your television supports Q Link, use a fully wired 21-pin Scart cable to connect it to the TV. The stations automatically downloaded through [Download from TV]. If your television supports RGB, set the AV1 Output to RGB 1 or RGB 2 in the 69 [Setup] menu. 1 Co
Résumé du contenu de la page N° 14
Connection with Audio/Video cable C You can use this frequently used standard connection with the provided accessories. 1 Connect the aerial to RF IN (Aerial input) of the DVD Recorder. 2 Connect RF OUT (Aerial output) of the DVD Recorder with the aerial input of the TV. 3 Connect the AUDIO OUT (L/R) and VIDEO OUT of the DVD Recorder with the audio/video of the television. 4 Connect the DVD Recorder and the television to the power supply system. After completing the above connections, proceed
Résumé du contenu de la page N° 15
Connection with S VIDEO cable D Depending on the television, the connection with the S VIDEO cable results in a higher quality picture than the connection with an Audio/Video cable. 1 Connect the aerial to RF IN (Aerial input) of the DVD Recorder. 2 Connect RF OUT (Aerial output) of the DVD Recorder with the aerial input of the TV. 3 Connect AUDIO OUT (L/R) and S VIDEO OUT of the DVD Recorder with the S VIDEO and audio input of the TV. 4 Connect the DVD Recorder and the television to the powe
Résumé du contenu de la page N° 16
Connection with HDMI cable (not included) E The HDMI connection can be used only with units that are suited for HDMI. 1 Connect the aerial to RF IN (Aerial input) of the DVD Recorder. 2 Connect RF OUT (Aerial output) of the DVD Recorder with the aerial input of the TV. 3 Connect HDMI AV OUT of the DVD Recorder with the HDMI input of the TV. 4 Connect the DVD Recorder and the television to the power supply system. 11 After completing the above connections, proceed to the Auto-Setup to tune in TV
Résumé du contenu de la page N° 17
Connection with HDMI cable (not included) E Connection to an amplifier (High Definition Multimedia Interface) If you connect the DVD Recorder to an HDMI-compatible unit, just one cable Television set transfers a high quality digital audio and video signal without interference. HDMI IN ! Once an HDAVI Control compatible unit has been connected to the HDMI terminal, switch the units on and automatically selects the input channel for the DVD Recorder. Repeat the procedure if there is any change
Résumé du contenu de la page N° 18
External units For all connections described: Before you connect cables, make sure that all units are switched off. Switch on the units after you have connected the cables. Amplifier (example) AV OUT Connecting an analogue amplifier or an analogue system component AUDIO IN In order to enjoy stereo or Dolby Pro Logic, connect a corresponding amplifier L R or an analogue audio component. AUDIO OUT ! Connect the AUDIO OUT (L/R) output e.g. with a Dolby Pro Logic amplifier.
Résumé du contenu de la page N° 19
COMPONENT VIDEO OUT COMPONENT VIDEO OUT terminal TV The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a COMPONENT clearer picture than the S VIDEO OUT terminal. VIDEO IN Audioinput L/R Connections via these terminals output the colour difference signals (PB/PR) and the Y PB PR brightness signal (Y) separately. Colours can be reproduced true to the original colour. The properties of the COMPONENT VIDEO input terminal are dependent on the Video
Résumé du contenu de la page N° 20
O L CK Profiles DVD SD HDD VHS Creating new profiles Edit Profiles Setup Auto-Setup Restart Tuning Digital You can create four different profiles where you can put together your favourite Disc Add New DVB Services analog and digital TV stations (99 entries). Picture Signal Condition The profiles are stored in the TV Guide. Sound Analogue Display Manual ! Press FUNCTIONS. Connection Download from TV ! Select [To Others] with and press ENTER to confirm. VHS ! Select [Setup] with and press ENT
