Résumé du contenu de la page N° 1
TATUNG TDR series Digital Recording System Page 0
TDR-22XX series
Digital Recording System
Installation and Operation Manual
V 1.01
TATUNG COMPANY OF AMERICA. INC
2850 El Presidio St., Long Beach CA 90810 USA
Tel: 310-637-2105 Fax: 310-638-2180
www.tatungusa.com
Résumé du contenu de la page N° 2
TATUNG TDR series Digital Recording System Page 0
Résumé du contenu de la page N° 3
TATUNG TDR series Digital Recording System Page 0 CONTENTS Chapter 1: Installation 1 Step 1 Connect the cables 2 Step 2 Turn on the system 2 Chapter 2: Watch Mode 3 2.1 Channel display window 5 2.2 Selection of Split screen 6 2.3 Motion Tracker 7 2.4 Mode switch button 8 2.5 On/Off button 8 Chapter 3: Setup Mode 9 3.1 Channel 11 3.2 Schedule 13 3.3 Speed 15 3.4 Color 17 3.5 Motion 18 3.6 P/T/Z Control 20 3.7 Password 21 3.8 V
Résumé du contenu de la page N° 4
TATUNG TDR series Digital Recording System Page 0
Résumé du contenu de la page N° 5
TATUNG TDR series Digital Recording System Page 1 CHAPTER 1: INSTALLATION Place the Digital Recording System on the flat surface or mount it on the 19” rack. * For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop through outputs on the back board. 1. Camera Inputs 2. Loop Through output 3. Reserved 4. CCTV Monitor output 5. Alarm Inputs 6. Alarm Outp
Résumé du contenu de la page N° 6
TATUNG TDR series Digital Recording System Page 2 Step 1: Connect the Cables Connect all the necessary connector and signal cables into the correct ports. Alarm In/Out Audio In Camera In Audio Out Camera Out CCTV Monitor Out PC Monitor Output Protect Network Port Socket Power In and LPT * For TDR-2209 there are only 9 camera Inputs and 9 Loop through outputs on the back board. For TDR-2204 there are only 4 camera Inputs and 4 Loop th
Résumé du contenu de la page N° 7
TATUNG TDR series Digital Recording System Page 3 CHAPTER 2: WATCH MODE Turn on the system. The main screen of TATUNG TDR-22XX series appears as below. Note: For TDR-2209 there are only 9 channels split the screen. For TDR-2204 there are only 4 channels split the screen The buttons and icons on the screen are described below: 1. Company LOGO This is the logo of TATUNG Company of America. 2. DATE/TIME Window This window displays the
Résumé du contenu de la page N° 8
TATUNG TDR series Digital Recording System Page 4 7. Full SCR Button This button allows you to hide all buttons and icons and enlarge the display windows to the FULL SCREEN. You have to right click to get back to normal. Once you get the full screen, if you LEFT click, the screen can not go back to normal, instead, the picture the mouse arrow sitting on will be enlarged to full screen. 8. Motion Button Click to enable the motion tracking function. This is a ver
Résumé du contenu de la page N° 9
TATUNG TDR series Digital Recording System Page 5 2.1 Channel display window 1. Channel (Camera) name 2. Image display window 3. Record status lamp 1. Channel (Camera) name Identify the name for each channel. You may assign the channel name in SETUP mode. 2. Image Display window This area displays the image comes from the camera. 3. Recording status lamp This lamp turns red at consecutive recording When motion recording, th
Résumé du contenu de la page N° 10
TATUNG TDR series Digital Recording System Page 6 2.2 Selection of Split screen Selection of window division mode that is available in 1 division window (sequence from channel 1 to channel 16), 4 window, 9 window, 16 window, and Full screen display. Click on the one of these buttons to perform the function Note: At all Ch Display, left click a specific camera, the one-window Sequence image of this camera will be enlarged without sequencing. And left-click again can
Résumé du contenu de la page N° 11
TATUNG TDR series Digital Recording System Page 7 2.3 Motion Tracker This function allows you to track the path of a moving object from one channel to another. All image windows this object passed by will be enlarged. Therefore, the object will always display on an enlarged window. Click on this button to enable the motion tracking function. Note: To enable this function, all channels need to be programmed to motion recording.
Résumé du contenu de la page N° 12
TATUNG TDR series Digital Recording System Page 8 2.4 Mode Switch button There are four function modes can be selected in this system. Click on the one of these buttons to perform the function SETUP: Click to switch to SETUP MODE. The setup mode includes buttons of CHANNEL, SCHEDULE, SPEED, COLOR, MOTION, P/T/Z PROTOCOL, PASSWORD, and VOICE. With these buttons your system can be custom- programmed to fit your operation requirements. SEARCH: Cl
Résumé du contenu de la page N° 13
TATUNG TDR series Digital Recording System Page 9 CHAPTER 3: SETUP MODE The first screen of the setup mode will be the channel setting as the following picture Note: For TDR-2209, CH 10 to CH 16 will be empty by the factory’s setting. For TDR-2204, CH 05 to CH 16 will be empty by factory’s setting The control buttons contained in the main screen are described below: 1. Channel Click on this button to setup the channel a
Résumé du contenu de la page N° 14
TATUNG TDR series Digital Recording System Page 10 6. P/T/Z camera protocol Click to setup the communication port and protocol used to communicate between Tatung’s DVR and the camera connected. 7. Password Click on this button to setup the user name and password for access security. The passwords are divided in SETUP, VIEWER, SHUTDOWN, and REMOTE four levels. Hiding camera can also be programmed with this setup. 8. Audio Click to setup the audio recording
Résumé du contenu de la page N° 15
TATUNG TDR series Digital Recording System Page 11 3.1 Channel This function button (as shown below) can be used to setup the channels. There are two different types of channel setting, manual or automatic. Click this button to start the channel setup and the screen will be shown as below. Note: For TDR-2209, CH 10 to CH 16 will be empty by the factory’s setting. For TDR-2204, CH 05 to CH 16 will be empty by factory’s setting
Résumé du contenu de la page N° 16
TATUNG TDR series Digital Recording System Page 12 2. Setup the name Setup the channel name by following the procedure 1. Click the channel number 2. Key in the name of the channel 3. Limited to 14 characters and number including space. 2. Key in the 1. Click to channel name choose channel here 3. EXIT You may click any other icon to exit Channel Setup Mode and go directly into other setup mode. Click EXIT button, you will be back to Watc
Résumé du contenu de la page N° 17
TATUNG TDR series Digital Recording System Page 13 3.2 Schedule This function button (as shown below) is used to setup the schedules. Click on this button to start schedule setup and the screen will display as follow. (Please follow the 7 steps below) Note: For TDR-2209, Camera’s CH 10 to CH 16 and Motion’s CH 10 to CH 16 will be useless even you activate it. For TDR- 2204, Camera’s CH 05 to CH 16 and Motion’s CH 05 to CH 16 will be useless even yo
Résumé du contenu de la page N° 18
TATUNG TDR series Digital Recording System Page 14 4. Activate the camera Click the camera icon to activate the cameras which are used in this group. 5. Select the Recording mode Select the recording mode for each channel. There are three recording modes. DEFAULT Continuous recording Record while motion detected Motion Record while Sensor is active Sensor 6. Setup Alarm Out: Alarm Output may setup when either a sensor is triggered or motion is det
Résumé du contenu de la page N° 19
TATUNG TDR series Digital Recording System Page 15 3.3 Speed This function button (as shown below) can be used to setup the recording speeds. Click this button the screen displays as below. Normal Recording Speed Dragging the cursor can designate normal recording speed (frame rate) for each camera or all cameras (Separate frame rate for each camera is available). Motion Recording Speed Dragging the cursor can designate motion reco
Résumé du contenu de la page N° 20
TATUNG TDR series Digital Recording System Page 16 MISC Check on the box if you want the following features to be enabled. Sensor Beep Activate beep sound when sensor is triggered. When activated, only 1, 4, 9, 16 divisions are available, to Proportion keep the horizontal and vertical ratio of each channel window. Motion Log Activated Motion log function. Recording While Continue to record when the system in search mode. Searching Removable HDD System
