Résumé du contenu de la page N° 1
INSTALLATION &
OPERATION MANUAL
Digital Video Recorder
DVR-3024 & DVR-3024D
Before trying to connect or operate this product, please read this manual completely
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
SAFETY PRECAUTIONS All the following safety and operated instructions which will prevent harm or damage to the operator and other persons should be read before the unit is operated. INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
Résumé du contenu de la page N° 4
CONTENTS 1. INTRODUCTION ................................. 3 3.6 Key Lock Operation ............................... 29 1.1 Product Introduction..................................3 4. MENU SETUP....................................30 1.2 Product Features ......................................3 4.1 REC Setting ........................................... 30 1.3. FRONT / REAR VIEW .............................4 4.2 ALARM / MOTION Setting ..................... 31 1.3.1 Front View.................
Résumé du contenu de la page N° 5
1. INTRODUCTION 1. INTRODUCTION 1.1 Product Introduction levels for recording. This DVR-3024 is a storage media of digital Event/Timer/Alarm recording mode. video image, which uses hard disk drives Quick search by time, alarm, event, and instead of VCR tapes to store video. It recording list. enables you to enjoy the extreme flexibility of Fast and slow playback of recorded video digital image archiving instead of clumsy tape at various speeds. management. Equipped with a
Résumé du contenu de la page N° 6
INTRODUCTION ( continued ) 1.3. FRONT / REAR VIEW 1.3.1 Front View FOR CD-ROM MODEL FOR REMOVABLE HDD MODEL 1 23 2 24 3 4 5 6 PLAY STOP REC PAUSE REV FWD ZOOM Power Display Setup Search Enter Seq./Save A-rec T-rec DISK Power 7 8 9 10 11 14 13 12 15 16 17 18 19 20 21 22 1 1 CD-RW device compartment: Hard-disk drive compartment: The compartment allows you to burn the data The compartment allows you to install a mostly for backup purposes. This tray is for loadi
Résumé du contenu de la page N° 7
3 PAUSE button: In a playback display, press this to freeze the display. During the freeze, press it to display one frame/field of a picture at a time in the forward direction. (Illuminate green in PAUSE mode.) 4 PLAY button: Press to play back a recorded video from the hard disk. (Illuminate green in PLAY mode.) 5 STOP button: Press to stop playing back a recorded video. (Illuminate green in STOP mode.) 6 REC button: Push to start recording video into a hard disk while in the liv
Résumé du contenu de la page N° 8
the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up. The orange light indicates the hard-disk is retrieving at disk-full status. 20 Shuttle Ring: The shuttle can be moved forward and backward for playback in either direction. Turn this left to play a recorded video in the reverse direction at faster or slower speeds than the recorded speed. Turn this right to play a recorded video in the forward direction at faster or slower speeds th
Résumé du contenu de la page N° 9
1.3.2 Rear View 25 26 27 28 IN hi-z OUT 75 SD Card RS-485 IN RS-232 ETHERNET OUT MONITOR AUDIO ALARM I/O DC12V 30 34 35 36 37 29 31 32 33 25 VIDEO IN Connector: These 4 BNC connector including SWITCH OUT, GROUND, connectors are used to connect the video ALARM OUT, DISK FULL, RECORD IN, output from a camera ALARM RESET, and ALARM IN for 26 Hi-Z/75 Ω Individual termination: These 4 connecting with external devices. Please refer switches are used to set the imped
Résumé du contenu de la page N° 10
1.4 ALARM In / Out DISK FULL ALARM RESET ALARM OUT RECORD IN GROUND 5 4 3 2 1 9 8 7 6 ALARM1 IN ALARM4 IN ALARM2 IN ALARM3 IN The above figure is the rear view. 7. ALARM3 IN (INPUT): same as the above, 1. GND: Ground Contact. for CH 3 2. ALARM OUT (OUTPUT): This is an 8. ALARM2 IN (INPUT): same as the above, alarm output trigger. Connect this to for CH 2 external devices such as buzzers or 9. ALARM1 IN (INPUT): same as the above, lights. for CH 1 5V 0V(Active)
Résumé du contenu de la page N° 11
2. INSTALLATION 2. INSTALLATION Please follow the instruction and the diagram below to set up the system. 2.1 Basic Connection A. CONNECTING WITH 1 to 4 CAMERAS Camera Camera Camera Camera IN hi-z OUT 75 SD Card RS-485 IN RS-232 ETHERNET OUT MONITOR AUDIO ALARM I/O DC12V Monitor B. ATTACHING AN EXTERNAL DEVICE TO DVR Connect an alarm out, alarm input, and a peripheral device as shown in the diagram below. Trigger Out IN hi-z OUT 75 SD Card RS-485 Alarm
Résumé du contenu de la page N° 12
INSTALLATION ( continued ) proceeding with the recording function. The jumper-setting arrangement of installed 2.2 Hard-disk Drive Installation hard-disk drives for the system (Table 3.2 A.) The DVR is equipped with two compartments is shown in the tables below. of hard disk drive (for removable model only). The unit usually comes with one Note: The CD-RW model is equipped with a hard-disk drive installed in the compartment fixed hard- disk and a CD-RW drive. The unit of HD1, whi
Résumé du contenu de la page N° 13
Table 3.2 B. Compatible hard-disk drives Manufacturer Model Capacity Rotation Seagate ST340810A 40G 5400 RPM ST380020A 80G 5400 RPM ST320014A 20G 5400 RPM ST340015A 40G 5400 RPM ST380012ACE 80G 5400 RPM ST3120025ACE 120G 5400 RPM ST340014A 40G 7200 RPM ST380011A 80G 7200 RPM ST380013A 80G 7200 RPM ST3120026A 120G 7200 RPM ST3160023A 160G 7200 RPM ST3200822A 200G 7200 RPM ST3250823A 250G 7200 RPM ST3400832A 400G 7200 RPM Maxtor 4A160J0-1A 160G 5400 RPM 4R080L0-1 80G 540
Résumé du contenu de la page N° 14
2.3 System Information and Channel Selection FIGURE 3.3 A 2.3.1 System information 1+2 :59G 12.4 HR You can display system settings information as QUALITY : NTSC shown in FIGURE 3.3 A below at any time by RATE : 20 F/S 8 pressing the Display button . In the playback mode, the recorded video information HD SIZE REC 1 20G 10.0% is displayed. In the live or recording mode, the 2 39G 0.0% Manual Recording information is displayed. IP : Each sequential press of the Display b
Résumé du contenu de la page N° 15
5. Restart the unit when the device sounds a tone twice and displays the message “PLEASE Mode Key Result Display RESTART”. The process is complete. Live / Quad (If you have already followed the procedures 1~5, Record ( ) and the unit is still unable to switch on, please first CH1/ ( Single channel ) check if the SD card you are using is functioning CH2/ and the file is intact. And then start procedures 1 CH3/ ~ 5 all over again.) CH4 6. Verify the version of the system
Résumé du contenu de la page N° 16
3. OPERATIONS 3. OPERATIONS hard-disk drive will normally be filled in 3.7 hours This section shows you how to operate and (see the gray area in the table). If the total manage the DVR when it gets in the way. capacity of 80GB hard-disk drives is in use under the same refresh rate and picture quality, it will be filled in 14.8 hours (4 times the rate of a 20GB 3.1 Configuring Recording hard-disk drive). Settings Recording time will vary depending on the image size, record
Résumé du contenu de la page N° 17
OPERATIONS ( continued ) PAL (Audio OFF) Possible Recording Time HDD=20GB ( hour ) BEST 3.4 6.0 9.0 15.0 27.1 51.1 99.3 171.6 605.3 906.4 1207.6 Image HIGH 3.6 7.2 10.8 18.0 32.5 61.4 119.2 205.9 726.3 1087.7 1449.1 Quality STANDARD 4.5 9.0 13.5 22.5 40.6 76.7 149.0 257.4 907.9 1359.7 1811.4 BASIC 5.7 11.4 17.1 28.5 51.3 97.0 188.3 325.2 1146.9 1717.5 2288.1 Refresh Rate (Frame/Sec) 25 12.5 8.3 5 2.7 1.4 0.76 0.44 1/8 1/12 1/16 REC Time Mode 3 hr 6 hr 9 hr 12 hr 24 hr 48 hr 96 hr 1
Résumé du contenu de la page N° 18
(2) Select the CLOCK / TIMER and press the 3.2 Recording Operations 15 This section details the way to record video Enter button to enter the CLOCK / into hard-disk drives. Before commencing with TIMER page. the recording function, please configure the (3) Select the TIMER－SET. 15 recording setting properly according to your (4) Press the Enter button to enter the REC needs. SCHEDULE table. 11 3.2.1 Manual Recording (5) You can set up by using the “<” button 14 Take the following s
Résumé du contenu de la page N° 19
6 set ALM OPERATION to ON/ OFF. (8) Press the REC button for 3 seconds during the scheduled recording to stop it any MAIN MENU time. If you wish to continue the scheduled RECORD ALARM / MOTION 6 TIMER/ SEQ/ TITLE recording, press the REC button to COMMUNICATION DISK proceed. SYSTEM GOTO ALARM/ MOTION PAGE Note: You can proceed to start the scheduled recording from the current time if it is in the ALARM/ MOTION scheduled interlude as soon as se
Résumé du contenu de la page N° 20
3.2.4 Externally Triggered Recording By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can activate/deactivate the recording function of a DVR. The file will be kept with a prefixed “R”. NOTE: The status of recording operations when an alarm takes place is shown in the diagrams below. 1 Manual or Externally Triggered Recording Alarm Takes Place Actual Recording Speed Normal Alarm Normal 2 Timer Recording Alarm Takes Place Actual Recordin
