Résumé du contenu de la page N° 1
17" COLOR LCD DUAL QUAD
SECURITY SURVEILLANCE SYSTEM
WITH INTERNET REMOTE VIEWING
Instruction Manual
English Version 1.0
MODEL:
SG17L7584
www.lorexcctv.com
Copyright (c) 2006 LOREX Technology Inc.
Résumé du contenu de la page N° 2
Thank you for purchasing the IP enabled 17” LCD 2 Page/8 Channel Color Quad Observation system. Lorex is committed to providing our customers with a high quality, reliable security product. The IP enabled Observation system allows you to make an ethernet LAN connection from the monitor to a router for internet monitoring. With this 2 Page Quad system, you are capable of viewing up to 8 camera locations in real time (4 cameras per page). This system provides multiple viewing options in- clud
Résumé du contenu de la page N° 3
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1. Read
Résumé du contenu de la page N° 4
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners. Use a damp cloth for cleaning. hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be moved with care. Quick 1
Résumé du contenu de la page N° 5
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury In order to improve the feature functions and qualit
Résumé du contenu de la page N° 6
Observation System Features Observation System Features � High Resolution 17" LCD Monitor with Network Interface for Remote Viewing over the internet* � Ultra Sharp image reproduction with High Contrast Ratio � Dual Quad Technology allows for viewing of up to 8 cameras � Wide Viewing Angle with On-screen viewing of date, time and camera title � Fast Response Time (prevents ghosting) � Slim Space Saving Design � Convenient cable channel for running wires � Flexible stand allows for height adju
Résumé du contenu de la page N° 7
Table of Contents Table of Contents Getting Started .......................................................................................... 8 SG17L7584 - Front - Primary Function Buttons ................................... 9-12 SG17L7584 - Front - Secondary Function Buttons ................................. 13 SG17L7584 - Back ............................................................................. 14-15 Remote Control .....................................................................
Résumé du contenu de la page N° 8
Getting Started Getting Started The SG17L7584 system comes with the following components: 17” Color 2 Page / 8 Channel Dual 4 x 1/4” CCD Color IR Day/Night Quad LCD Monitor Cameras (with Removable Sunshade) 4 x Camera Ethernet Standard Power Cable Cables (57’ Length) Cable Remote Control NetViewer Software CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 8
Résumé du contenu de la page N° 9
SG17L7584 - Front - Primary Function Buttons SG17L7584 - Front - Primary Function Buttons 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1. FN (FUNCTION) BUTTON - When this button is pressed, the LED below the button will turn ON indicating that secondary function of the front panel buttons can be activated. To de-activate the secondary function for the buttons (and reactivate the primary functions), press the button [FN] button again and the LED will turn off. 2. CAMERA SELECT BUT
Résumé du contenu de la page N° 10
SG17L7584 - Front - Primary Function Buttons 45 6 4. FRZ ALL BUTTON - The function of the FRZ ALL (Freeze All) button is to digitally freeze the image that is being displayed on the monitor. To freeze an image: � Press the [FRZ] button while viewing a FULL SCREEN single camera in live video. This will freeze the camera image being viewed. � Pressing the [FRZ] button while in Quad mode. This will freeze all four cameras displayed on the monitor. An "F" will appear in the On-Screen Display. �
Résumé du contenu de la page N° 11
SG17L7584 - Front - Primary Function Buttons 789 7. ZOOM BUTTON - This monitor is equipped with 2 times digital ZOOM. To utilize this feature proceed as follows: � Set the monitor to full screen mode or Quad mode for the desired channel � Press the ZOOM button. ZOOM mode is now active � Use the Navigation Buttons [ ] keys to move the area being captured in 2x ZOOM MODE. � To exit ZOOM MODE, press the ZOOM button again. 8. SEQ BUTTON - This function is used to Sequence between all camera loca
Résumé du contenu de la page N° 12
SG17L7584 - Front - Primary Function Buttons 10 11 12 13 14 10. PIP POP BUTTON - Display a main camera image with secondary camera sub-images: � PIP (Picture In Picture) allows you to view three locations simultaneously, one being the main channel, the others being viewed as small images on the screen. To view detailed settings, see Main DUAL PIP Menu Controls on Page 25. � POP (Picture on Picture) divides the screen into 4 screens, with the main channel occupying two-thirds of the screen.
Résumé du contenu de la page N° 13
SG17L7584 - Front - Secondary Function Buttons SG17L7584 - Front - Secondary Function Buttons 15 16 17 18 19 20 21 22 15. ALRS (ALARM RESET) BUTTON - To reset an alarm when it is active, press the [FN] button to activate the secondary functions (note that the LED below the button will turn on), and press the ALRS button. The alarm will be reset. 16. PAN / TILT BUTTON - Press the [FN] button to activate the secondary functions followed by the [PT Mode] button to activate the Pan/Tilt functions
Résumé du contenu de la page N° 14
SG17L7584 - Back SG17L7584 - Back 12 3 4 567 1. RCA AUDIO INPUTS - Channel 1-8 Audio inputs (for non-DIN type cameras with standard RCA Audio output). 2. BNC VIDEO INPUTS - Channel 1-8 camera inputs (used to connect Cameras with BNC connection type), or can be used for Looping Video Output to a DVR NOTE: When DIN type cameras are connected on a channel, the BNC CONNECORS serve as LOOPING VIDEO OUTPUTS, and will send video to another device (such as a DVR or SLAVE MONITOR). 3. 6 PIN DIN CAME
Résumé du contenu de la page N° 15
SG17L7584 - Back SG17L7584 - Back Additional controls can be accessed by tilting the monitor forward. 12 3 1. AC INPUT - Connect the AC power (using the power cord provided with the unit) from the monitor to an electrical outlet 2. POWER SWITCH - This button controls power to the entire unit. Depress the side with the ‘I" to turn power ON. Depress the other side to turn the unit OFF 3. ETHERNET PORT - Connects the monitor to a router for connection to the internet. Refer to the Netviewer Ins
Résumé du contenu de la page N° 16
Remote Control Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the SG17L7584 - Primary / Secondary Buttons on Pages 10-14. 16
Résumé du contenu de la page N° 17
Installing Cameras Installing Cameras The SG17L7584 Observation System includes 4 - 1/4” CCD Color IR Day/Night Indoor/Outdoor Cameras* INFRA-RED LEDs - Provides illumination for low light conditions INPUT CABLE (BACK) - Delivers Video / Audio / Power from the Observation System to the Camera CAMERA LENS - Delivers CCD Color image to the Observation System BRACKET - using a 6mm lens Metal bracket connects to the Camera for mounting to walls, ceilings and other MICROPHONE - surface
Résumé du contenu de la page N° 18
Connecting Cameras Connecting Cameras The SG17L7584 Observation System includes 4 x 1/4” Color CCD DIN Cameras. Additional cameras can be added to the 4 additional camera inputs using the DIN or BNC ports. DIN Connected Cameras 4 x 1/4” COLOR CCD DIN cameras are OBSERVATION SYSTEM included with the Observation System. These cameras have a single cable, and receive power directly from the Observation System. The DIN ports are located on to the bottom row of inputs, and are labeled as CH1
Résumé du contenu de la page N° 19
Monitor Features Monitor Features The SG17L7584 Observation System has adjustable tilt and height positioning. The height can be adjusted using the thumbscrews at the base. � Loosen the thumbscrews (located on the lower left and right sides of the base) � Adjust the Monitor to the desired height � Tighten the screw to hold the Monitor positioning Thumbscrews The Monitor can be tilted at a 45° angle (where the base meets the monitor). Tilting the Monitor gives easy access to the additional co
Résumé du contenu de la page N° 20
Cable Channel Cable Channel The SG17L7584 Observation System comes with a built in cable channel to easily organize and conceal wiring. 1. Remove the Cable Channel Cover. 2. Connect the Power Cable, Cameras, Ethernet Cable and any Alarm Devices to the System by running the cables through the hole in the stand before connecting to the Observation System. 3. Once all cables have been connected to the System, replace the Cable Channel cover. 20
