Résumé du contenu de la page N° 1
EPSON PRODUCT SUPPORT BULLETIN
Date: 11/8/04 Originator: RB, CH, JD, SA
PSB #: PSB.2004.03.001C Authorization:
Reference: PSB.2004.03.001A Total Pages: 19
Product(s): EPSON Stylus Color 3000, Stylus Pro 4000, 5000, 5500, 7000 Series, 7600 Series, 9000 Series, 9600 Series,
10000 Series, and 10600 Series
Subject: Maximum Printable Area Limits for the EPSON Professional Graphic Printer line.
This bulletin was created to inform you of the maximum custom page sizes allowable for EPSON Pro
Résumé du contenu de la page N° 2
Maximum custom page size allowable for EPSON PostScript options (PPD): Stylus Color Stylus Stylus Stylus Stylus Stylus Stylus Stylus Stylus Stylus Stylus Pro 3000 Pro 4000 Pro 5000 Pro 5500 Pro 7000 Pro 7500 Pro 7600 Pro 9000 Pro 9500 Pro 9600 10000 Series 44 in. N/A 44 in. N/A N/A N/A N/A N/A N/A N/A N/A EPSON Stylus RIP N/A N/A 44 in. N/A See See N/A See See N/A N/A EPSON Fiery NOTE 1 NOTE 1 NOTE 1 NOTE 1 RIP Station N/A N/A N/A 44 in. N/A N/A N/A N/A N/A N/A N/A EPSON Fiery S
Résumé du contenu de la page N° 3
* These applications allow for tiling of print pages, therefore allowing you to print beyond the printers maximum page length limit and print to the applications limits. The printer driver must be set for Roll Paper (Banner) mode so that page breaks at the printer’s maximum page length do not occur (in essence gives you a 0 margin for the bottom of the page). The Stylus Pro 5000/5500 however will give a slight page break at the 44 inch limit as these printers do not support banner mode. Also,
Résumé du contenu de la page N° 4
For Windows Users, if you encounter partial/incomeplete prints while having Finest Detail enabled, please disable this setting. It is recommended for low resolution text and line art to sharpen their edges. For photos, this may create a massive print file that is too large for the printer driver to process correctly. The following examples show how to setup banner printing from Adobe Illustrator 8.x/9.x and CorelDRAW 9 from the PC platform. The Macintosh versions of these application
Résumé du contenu de la page N° 5
Adobe Illustrator CS: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). NOTE: Mac O/S 10.3.3 system is used in this example. Windows versions of this application should be very similar in functionality. Please refer to your software documentation for additional assistance. In this example, a “20 inches wide X 180 inches high” document is created. 1. Click on File and New, set up the width and height (sample shows 20 W x 180 H), then cli
Résumé du contenu de la page N° 6
3. Click on File, Print, click Setup, under Tiling click on the drop down arrow, select Tile Full 4. Pages and click the Printer button. 5. When the printer setup window comes up, select your printer name and set the Roll Paper Options to: Roll Paper Banner Roll Paper Banner – No Margin ( if printing no margins) 6. In the Copies and Pages section, click on the drop down arrow, select Roll Paper Option. Uncheck Auto Cut then check Save Roll Paper. 6
Résumé du contenu de la page N° 7
7. Then click on Print. This will bring you back to the Print window. 8. This time click on Page Setup, you see the following screen, just click on Continue (If you don’t want to see the window again, place a check mark on Don’t Show Again box). 7
Résumé du contenu de la page N° 8
9. When Page Setup is open, click on the down arrow for Custom Paper Size. NOTE: When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (90.5 inches). In this example we take (180/2 = 90), therefore the custom page size created would be 20x90 (inches). 10. Click on New, name the custom size (i.e. 20 x 180 in this example), under Paper Size type in 20 inches for the width and 90 inches for the height, margin
Résumé du contenu de la page N° 9
11. Under Paper Size, click on the drop down arrow and select the custom paper size you created (i.e. 20 X 180) orientation is set to portrait mode. Then click OK. 12. In the Print windows the preview pane will show 2 grids or pages. This indicates that a full image is tiled. 9
Résumé du contenu de la page N° 10
13. Click on General, then click the square on Reverse Order. 4. Click on Print. 10
Résumé du contenu de la page N° 11
NOTE 1: When enabled, the first page will be printed first, instead of the last page first. Or Change the orientation to “Reverse”, then you don’t have to check the “Reverse Order”. NOTE 2: Always select the custom page size last, if not, it will default to other paper sizes. NOTE 3: Before printing a large document, make sure you have enough ink to prevent getting an Ink Out message, causing the print job to stop and not completing the entire print.
Résumé du contenu de la page N° 12
Adobe Illustrator 8.x/9.x: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and open or place your file in the page layout. 2. Click on File, then Document Setup. The following screen appears. 3. Uncheck Use Print Setup, enable Tile Full Pages and create the page size (in our example we used 44x227 inches). 4. Click, Print Setup. This will bring up the print driver.
Résumé du contenu de la page N° 13
5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size. In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media. 13
Résumé du contenu de la page N° 14
8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document setup. Now double-click the “Page” tool. 9. The page should now show the following. 10. At this point you can and resize the image to fit within the printable area and print. 14
Résumé du contenu de la page N° 15
CorelDRAW: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the page size and image for the document as shown in the following image. 3. Click on File and Print Setup. 15
Résumé du contenu de la page N° 16
4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 16
Résumé du contenu de la page N° 17
6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size. In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media. 7. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document. 17
Résumé du contenu de la page N° 18
8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window. 18
Résumé du contenu de la page N° 19
9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check other tab settings (if necessary) and click Print Preview (recommended) if you want to see how the file will be printed or Print to output the file to your printer. For all other applications, please refer to your software documentation for information on maximum custom page sizes for documents, banners or tiling prints. 19
Résumé du contenu de la page N° 20
EPSON Product Support Bulletin Date: 09/25/2002 Originator: MS PSB #: PSB.2002.09.004 Authorization: Reference: N/A Total Pages: Product(s): EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000, 5500 and Stylus Color 3000 Printers PostScript Printing Support for Mac OS X Native Mode Subject: This bulletin provides instructions for installing and configuring a Mac OS X Client with your existing EPSON hardware or software RIP. If your EPSON Professional Wide Fo
