Instruction d'utilisation Sears 875.501152

Résumé du contenu de la page N° 1

Owner's
Manual
MODEL NO.
875.501152
CAUTION:
3 TON CAPACITY
Read Rules for
Safe Operation
SERVICE JACK
and Instructions
Carefully
• Operation
° Maintenance
• Repair Parts
° Warranty
IB-501152
Sold by SEARS, ROEBUCK AND CO., Hoffman Estates, IL 60179 U.S.A.
J

Résumé du contenu de la page N° 2

OPERATION OIL FILLER PLUG , This Jack Is a Lifting Device Only • Designed only for lifting part of the total vehicle (ie. one wheel). Do not move or dolly the vehicle while it is on the jack. • Position the Jack • .J Position this jack to only lift on the areas of the vehicle specified by the vehicle manufacturer. • Use Support Stands • After lifting the vehicle always support the RELEASE VALVE GEAR load with appropriately rated vehicle support Fig. 1 stands before working on the vehicle. • Do N

Résumé du contenu de la page N° 3

PARTS LIST Maintenance To Add Oil: • Position the jack on level ground and lower the saddle. Remove the oil plug (See Fig.1). • Fill the oil case till it is level with the oil filler plug hole. To Replace Oil: • Release valve gear assembly and remove !oil filler plug. • Rip the jack over so that old oil will drain from the oil filler hole. • Refill through oil filler hole. Keep dirt and other material clear when pouring. • After refilling, open the release valve to remove any air in the hydrauli

Résumé du contenu de la page N° 4

Service Jack Trouble Shooting Assistance Problems Jack will not Jack will not Jack will not Poor jack Causesand lift load hold load lower lifting Solutions Releasevalveis not Owner's • completely closed. Turnclockwise. Manual Air is in hydraulics. Release from system. Low oil level. Add oil as required. Oil reservoir is overfilled. = Drain excess oil. MODEL NO. • Lubricate moving parts. 875.501152 Power unit malfunctioning. Replace the power unit. Your Sears merchandise has added value when you