Résumé du contenu de la page N° 1
OPERATING
GUIDE
FOR YOUR
MAGNUM
ALEm-800/800s
SECURITY
SYmM
01955 NAPCO
Résumé du contenu de la page N° 2
You have taken a major step in protecting your home or busi- ness by having a Napco Magnum Alert-800/800S Alarm Control Center installed. Please read this guide thor- oughly to familiarize yourself with your new security system. Keep this booklet handy for future reference. Note especially the ALARM PLAN on page 15. Your alarm specialist will help you fiH it out and explain the various fea- tures and operating procedures for your new Magnum Alert SOW 800s.
Résumé du contenu de la page N° 3
A delay period that allows the system to Reports burglary and emergencies directty Labeled%” on the Digit-Key keypad. Lets be reset before it reports to a cantml to the central station over telephone lines. you manually remove one or more pro- station. tective zones from the system. AlmmPlmn Napco’s Digit-Key keypad puts Control our premises pro- Identifies the areas of Center functions at r fingertipa It can Independent,c~&at protect specific rprotection and lists tected by each zone o be mount
Résumé du contenu de la page N° 4
ughts MlnCSoundar l When you enter your premises, the tone reminds you to reset l Steady - system is armed. r the Control Center before the l Flashes - system is in alarm. end of a timed entry period so Count the number of flashes to you do not activate the alarm. tell in which zone the alarm The Mini-Sounder also sounds occurred. Example: if you attempt to arm the system alarm in Zone 4. when a particular zone is in trouble. smU9Mf-l l Steady - system is disarmed, all zones okay. l Flashes
Résumé du contenu de la page N° 5
Each security system is custom tailored to the owner’s needs, but all MAGNUM ALERTBOO/ 800s have the following: 1. 2.lhdMg~KayKeypad f.TheAIammOutput Your system contains up to six When any zone is activated, f=Wkay_J separate zones. Each zone is Lets you perform the following the Contr?l Center responds an independent circuit that pro- functions: arm/disarm the system; by sound’ng an aud’ble alarm tects specific areas of your home. and/or alerting a central station check the status (condition)
Résumé du contenu de la page N° 6
addiurmtheqs8mm If your system includes the Once you enter your personal code into the Napco Digit-Key Napco Digit-Key keypad you can keypad, the red ARMED/MEMORY choose your own private code light will go on to show the Control to arm and disarm the Control Center. To program your code, Center is armed, and off to show slide the switch (upper left hand it is disarmed. If you enter the wrong code, your alarm system will corner of your Control Center) into the LOAD position. Go to the fail to res
Résumé du contenu de la page N° 7
“trouble” and incapable of being onds to remind you that you armed. The green light will flash armed with one or more zones the number(s) identifying the shunted (turned off). First, check the green zone or zones in “trouble”. For When you try to arm with a STATUS light at the keypad or example, if your back door is open zone programmed as a Priority keyswitch. If this light is on stead- on Zone 1 and a window is open on Zone in “trouble”, the Control ily, enter your code. The red Zone 3, the gr
Résumé du contenu de la page N° 8
green STATUS light may start SHUNT button, labeled and Check the red ARMED/ flashing if zones are still in MEMORY light. If it is flashing, enter your code. The yellow “trouble” from the alarm. SHUNT light and the red ARMED/ an alarm occurred while you were gone. Disarm the system with MEMORY light will come on. The If there was an alarm and the your code from the keypad to green light will be out. All zones red ARMED/MEMORY light did silence the sounder. NOTE: If programmed by your alarm spe-
Résumé du contenu de la page N° 9
To arm with zone(s) shunted, protection Arming with first check the green STATUS Your alarm specialist may have lamp to make sure that no peri- installed an optional switch that You might have chosen one meter zone is in “trouble”. Then may be used to cancel the exit/ or two zones that you can man- press the SHUNT button, labeled entry delay period at the time of ually “shunt out” of the system “S”, and enter your code. The arming the system. Use this fea- from the keypad. A shunted yellow SHU
Résumé du contenu de la page N° 10
Panic alarm To activate a panic alarm and call for outside help, press the two buttons marked l and # on the Digit-Key keypad. you press both buttons at the s8me time. The panic zone is capable of sending signal to the Central Station when a Digital Communicator is being used (optional). The Penic Ai8rm is always active, whether your system is armed or not. 10 asilent Makesure
Résumé du contenu de la page N° 11
Your Alarm Specialist may have programmed your security system to be monitored by a Central Station. The built-in digital communicator can trans- mit emergency signals to the Centml Station 24 hours a day.
Résumé du contenu de la page N° 12
Cantfal Note which zones on your mribwk alarm plan have abort delay. This An optional feature that per- The Central Station will ac- is a 16 second delay that enables mits the Central Station to receive knowledge the fact that you have you to reset the system before a armed your system by “ringing a signal each time the system zone condition report is sent to back” with a short beep of the is armed, disarmed or both. the Central Station. Non-24 hour Mini-Sounder. zones, however, must first be r
Résumé du contenu de la page N° 13
general power outage. If there is, The following information is you will be operating from your applicable only where local After a fire alarm, the red FIRE ordinance permits use of your alarm standby battery. When AC power is ALARM light will be on. Press the Control Center for fire detection restored, the Mini-Sounder will SILENCE 8 FIRE RESET switch to come back on. Press the spring- clear the smoke detectors. loaded switch again to silence the Your Mini-Sounder. Alann/BaRtefyTese Fin Circui
Résumé du contenu de la page N° 14
an escape plan fire alarm system, adequate pro- tection requires an escape plan. To prepare your plan: Draw floorplans of your build- exits: a front or back door and a window from each room. (Make sure the window works. You may need a special fire escape ladder if the window is high up.) Write your outside meeting Rehearse: (1) Everyone in lMFoRTANTl - Read Carefkally their room with the doors closed. (2) One person sounds the alarm. (3) Each person tests his door. (1) (4) Pretend the door is
Résumé du contenu de la page N° 15
Contacts Zone Area Protected Zone Features (doors, windows, etc.) 1 3 I 4 I Aux. Central Station? Telephone# Service Person , Telephone# ‘optlonal katun, 15 (6)
Résumé du contenu de la page N° 16
NAPCOLlMiTEDWARRANly
