Instruction d'utilisation Pelco RK101

Résumé du contenu de la page N° 1

Installation/Operation
RK100 and RK101
Rack Mount Kits
C1967M-A (6/02)
Pelco World Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.pelco.com
USA & Canada: Tel: 800/289-9100 • Fax: 800/289-9150
International: Tel: 1-559/292-1981 • Fax: 1-559/348-1120

Résumé du contenu de la page N° 2

DESCRIPTION The RK100 Rack Mount Kit provides rack mounting for the QD104 Series Quad Video Processor while the RK101 Rack Mount Kit does the same for the DX2000DH Data Hub. The RK100 and RK101 are similar except for minor differences in dimensions and the location of screw holes. These kits support the mounting of one or two units per rack. INSTALLATION The RK100 and RK0101 rack mount kits contain the following parts: Qty Description 1 V bracket 1 Mounting block 2 Short rack ear 1 Long rack ear

Résumé du contenu de la page N° 3

Double Mount To rack mount two QD104 Series Quad Video Processors or two DX2000DH Data Hubs, refer to Figure 1. (Only the quads are shown. Installation of the data hubs is similar.) Do the following: 1 Remove the front and center screws from the sides of both units’ covers. Use four of the screws and attach the short rack ears to the outer sides of each unit. 2 Use two cover screws and attach the V bracket to the inner side of the right unit. 3 Use the remaining screws and attach the mounting bl

Résumé du contenu de la page N° 4

WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and MC3500/MC3600 Series); two years on all other cameras. ® • Three years on Genex Series (multiplexers, server, and keyboard). • Two years on all standard motorized or fixed focal lengt