Instruction d'utilisation Walker Edison Morristown 42" TV Console W42C77BL

Résumé du contenu de la page N° 1

Item #: W42C77
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 11/2010

Résumé du contenu de la page N° 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hole

Résumé du contenu de la page N° 3

Parts List

Résumé du contenu de la page N° 4

Hardware List Cam lock Cam bolt Wood dowel Glue tube Bolt Wrench Door stopper Small round head screw Shelf support pin Door stopper plate Small screw Door hinge Large screw Handle Large round head screw Medium screw Plastic wedge Sticker

Résumé du contenu de la page N° 5

Screw cam bolts (B) into stand top (1). Attach door stoppers (G) to stand top (1) using small round head screws (H). Screw cam bolts (B) into panels (3,4,5,6). Note that a cam bolt will be screwed into each side of panels (5,6). Insert dowels (C) into panels (3,4,5,6), slat (7) and shelves (9).

Résumé du contenu de la page N° 6

Insert dowels (C) into shelves (13) and panels (14,15,17,18). Screw cam bolts (B) into panels (14,15,17,18). Screw cam bolts (B) into doors (16,19). Attach door stopper plates (J) to doors (16,19) using small screws (K). Attach handles (N) to doors (16,19) using large round head screws (P).

Résumé du contenu de la page N° 7

Insert dowels (C) into feet (20) and back panel (10). Attach panels (14,15) to shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves (13) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf.

Résumé du contenu de la page N° 8

Attach panels (17,18) to the second set of shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves (13) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf. Attach the shelf assembly from the previous step to door (19) using cam bolts and dowels as guides. Insert cam locks (A) into panels (17,18) and tighten with a screwdriver.

Résumé du contenu de la page N° 9

Attach the shelf assembly from Step 6 to door (16) using cam bolts and dowels as guides. Insert cam locks (A) into panels (14,15) and tighten with a screwdriver. Insert cam locks (A) into slat (7). Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. Tighten cam locks (A) with a screwdriver.

Résumé du contenu de la page N° 10

6 Attach shelf (9) to panel (5), then panel (3) to shelf (9) using cam bolts and dowels as guides. Insert cam locks (A) into shelf (9) and tighten with a screwdriver. 6 Attach shelf (9) to panel (6), then panel (4) to shelf (9) using cam bolts and dowels as guides. Insert cam locks (A) into shelf (9) and tighten with a screwdriver.

Résumé du contenu de la page N° 11

1 Attach the panel assembly from the previous step to stand top (1) using cam bolts and dowels as guides. Insert cam locks (A) into panels (3,4,5,6) and tighten with a screwdriver. Note that two cam locks will be inserted into each panel. Carefully slide back panel (10) into place along the back of the stand assembly. Use cam bolts and dowels as guides. Insert cam locks (A) into back panel (10) and tighten with a screwdriver.

Résumé du contenu de la page N° 12

Carefully slide back panels (11) into place along the grooves at the back of the stand assembly. Attach stand supports (21) to stand base (2) using bolts (E). Tighten bolts (E) with wrench (F).

Résumé du contenu de la page N° 13

2 Attach stand base (2) to the stand assembly using bolts (E). Tighten bolts (E) with wrench (F). 2 Attach feet (20) to stand base (2) using dowels as guides.

Résumé du contenu de la page N° 14

Attach door hinges (L) to the door assemblies from Steps 8 and 9 using large screws (M). Attach door assembly (14,15) to the stand assembly at door hinges (L) using large screws (M).

Résumé du contenu de la page N° 15

Attach door assembly (17,18) to the opposite side of the stand assembly at door hinges (L) using large screws (M). Insert shelf support pins (I) into the stand assembly at desired shelf heights. Carefully slide shelves (8) into place resting on shelf support pins (I).

Résumé du contenu de la page N° 16

11 11 Secure back panels (11) using plastic wedges (R) and medium screws (Q). Final Assembly