Résumé du contenu de la page N° 1
Laurel BIOS.fm Page 1 Thursday, May 23, 2002 10:05 AM
Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S6010
Document Date: 05/20/02
Document Part Number: FPC58-0678-01
FUJITSU PC CORPORATION
1
Résumé du contenu de la page N° 2
Laurel BIOS.fm Page 2 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS 4. To activate a submenu press the [Enter] key. S Series BIOS 5. To return to a menu from a submenu, press the [Esc] key. BIOS SETUP UTILITY 6. To go to the Exit menu from any other menu, The BIOS Setup Utility is a program that sets up the press the [Esc] key. operating environment for your notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change
Résumé du contenu de la page N° 3
Laurel BIOS.fm Page 3 Thursday, May 23, 2002 10:05 AM Main Menu 2. If an error message is displayed on the screen, and you want to continue with the boot process and start the operating system anyway, press the [F1] key. POINTS If your notebook beeps a series of beeps that sounds like a code and the display is blank, please refer to the Troubleshooting Section. The Troubleshooting Section includes a list of error messages and their meanings. If your data security settings require it, yo
Résumé du contenu de la page N° 4
Laurel BIOS.fm Page 4 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for Navi- to help understand the field’s use. Note that the actual gating Through The Setup Utility to make any changes. drive labels shown may vary. (See Navigating Through the Setup Utility on page 2 for
Résumé du contenu de la page N° 5
Laurel BIOS.fm Page 5 Thursday, May 23, 2002 10:05 AM Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Options Default Description Floppy Disk A: Disabled [Disabled] Enables or disables a floppy disk. [1.44/1.2 MB 3.5"] Primary Master: Selects Primary The product # of Display the type of device on this ATA/ATAPI interface, if there is Master submenu the Hard Drive one. Pressing the Enter key selects the Primary Master submenu allowing additional device config
Résumé du contenu de la page N° 6
Laurel BIOS.fm Page 6 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA Note that actual hard drive label shown may vary. devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Primary Master [HITACHI-DK23DA-20-(PM)] Item Specific Help Type: [Auto] Select ATA/ATAPI drive Maximum Capacity:
Résumé du contenu de la page N° 7
Laurel BIOS.fm Page 7 Thursday, May 23, 2002 10:05 AM Main Menu Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description Sectors: A number between –— This item appears only when Auto is selected and the type is identified as 0 and 63 hard disk, or User is selected. When User is selected, you can change the value. This field is changed by incrementing (pressing the [Spacebar]) or by typing in the number. Maximum Display o
Résumé du contenu de la page N° 8
Laurel BIOS.fm Page 8 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS Secondary Master Submenu of the Main Menu The Secondary Master submenu is for the internal CD- not need to modify these settings; they are displayed for ROM drive. The drive type is displayed on this menu as your reference. well as the Main menu. Your notebook auto-senses the Note that actual drive labels shown may vary. characteristics of the internal drive installed. You will PhoenixBIOS Setup Utility
Résumé du contenu de la page N° 9
Laurel BIOS.fm Page 9 Thursday, May 23, 2002 10:05 AM Advanced Menu Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description LBA Mode Enabled [Disabled] Enables or disables Logical Block Addressing in place of Cylinder, Head, Control: Sector addressing. This option cannot be changed when Auto is selected. Disabled PIO Transfer Standard [Standard] Selects the method for moving data to/from the drive. Autotype the Mode
Résumé du contenu de la page N° 10
Laurel BIOS.fm Page 10 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the Enable or disable support for Plug & Play Setup Utility to make any changes. operating systems. (See Navigating Through the Setup Utility on page 2 for Set the I/O addresses for the serial and parallel ports. more information) Set the communication mod
Résumé du contenu de la page N° 11
Laurel BIOS.fm Page 11 Thursday, May 23, 2002 10:05 AM Advanced Menu Table 4: Fields, Options and Defaults for the Advanced Menu Menu Field Options Default Description Plug & Play O/S: No [No] Select Yes if you are using a Plug & Play capable operating system. Select No if you need the BIOS to configure non-boot devices. Yes Protected Device No [No] No: allows Plug & Play operating system to change device Configurations: system settings. Yes Yes: prevents a Plug & Play operating syste
Résumé du contenu de la page N° 12
Laurel BIOS.fm Page 12 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu POINTS provides the ability to set the I/O addresses and interrupt levels for the serial, infrared, and parallel To prevent IRQ and address conflicts, avoid changing the default settings. If you must change the settings, ports of your notebook. you can call 1-800-8Fujitsu for technical assista
Résumé du contenu de la page N° 13
Laurel BIOS.fm Page 13 Thursday, May 23, 2002 10:05 AM Advanced Menu Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description Serial Port: Disabled [Enabled] Configures the serial port using either no configuration (Disabled), a user defined configuration (Enabled), or by allowing the BIOS or OS to choose Enabled the configuration (Auto). Auto I/O Address: 3F8 - 3FF [3F8 - 3FF] Allows user to set the se
Résumé du contenu de la page N° 14
Laurel BIOS.fm Page 14 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. PhoenixBIOS Setup Utility Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [Auto] Selects power-on state Hot Plug: [Enabled] for Numlock. Internal Pointing Device: [Auto Disabled] Initial
Résumé du contenu de la page N° 15
Laurel BIOS.fm Page 15 Thursday, May 23, 2002 10:05 AM Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display [Internal Flat Panel] Select display terminal. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 7. Video Features
Résumé du contenu de la page N° 16
Laurel BIOS.fm Page 16 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Internal Device Configurations Item Specific Help [Disabled] IDE Contoller: [Both No IDE ports are LAN Controller: [Auto] enabled. Wireless LAN: [Enabled] [Primary] Only prima
Résumé du contenu de la page N° 17
Laurel BIOS.fm Page 17 Thursday, May 23, 2002 10:05 AM Advanced Menu PCI Configuration Submenu of the Advanced Menu The PCI Configuration submenu allows the user to POINT reserve specific interrupts (IRQs) for legacy ISA devices, and to enable or disable built in PCI device modules. The BIOS setting for your communication device is variable depending on your notebook’s configuration. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit PCI Configurations Item
Résumé du contenu de la page N° 18
Laurel BIOS.fm Page 18 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS IRQ Reservation Submenu of the PCI Configuration Submenu The IRQ Reservation submenu of the PCI Configuration CAUTION submenu allows the user to mark various IRQs as reserved for use by legacy ISA devices. When an IRQ Only IRQ's 9, 10, & 11 can be reserved without conflict. is reserved, the BIOS does not use it for embedded PCI or ISA devices. PhoenixBIOS Setup Utility Main Advanced Security Pow
Résumé du contenu de la page N° 19
Laurel BIOS.fm Page 19 Thursday, May 23, 2002 10:05 AM Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features Submenu configures the system processor. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help Select Enhanced SpeedStep(TM) Technology: [Enabled] Intel(TM) SpeedStep(TM) On Battery: [Battery Optimized] Technology enabled or On AC: [Maximum Performance] disabled. F1 Help Select Item -/Space Change Values F9
Résumé du contenu de la page N° 20
Laurel BIOS.fm Page 20 Thursday, May 23, 2002 10:05 AM LifeBook S Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help USB Floppy Disk: [Enabled] [Disabled] Legacy Floppy Emulation is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help Select I
