Résumé du contenu de la page N° 1
CPV350
GPS Chart Plotter
with VHF FM Marine Transceiver
OWNER'S MANUAL
Résumé du contenu de la page N° 2
WARNING!!! Electronic charts displayed by the CPV350 are believed to be accurate and reliable, but that are not intended to be a substitute for the official charts, which should remain your main reference for all matters related to the execution of safe navigation. For this reason we would like to remind you that you should carry on board and use the official published and approved nautical charts. FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digita
Résumé du contenu de la page N° 3
Congratulations on you purchase of the CPV350C GPS Chart Plotter with VHF FM Marine Transceiver! Whether this is your first GPS chartplotter, or if you have other STANDARD HORIZON equipment, the STANDARD HORIZON organization is committed to ensuring your enjoy- ment of this GPS chartplotter. STANDARD HORIZON technical support personnel stand behind every product we sell, and our Product Support team invites you to contact us should you require technical advice or assistance, at 800/767-2450. CAU
Résumé du contenu de la page N° 4
TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................................................... 8 1.0 GENERAL INFORMATION .............................................................................................. 8 1.1 PACKING LIST .................................................................................................................9 1.1.0 Packing List .....................................................................
Résumé du contenu de la page N° 5
6.3 SELECTING LORAN TD OR OTHER COORDINATE SYSTEM ................................... 38 6.4 CHANGING THE CHART COLOR ................................................................................ 39 6.5 SELECTING PAGES USING SOFT KEYS .................................................................... 39 6.6 CUSTOMIZING THE SOFT KEYS ................................................................................. 40 6.7 OTHER SETTINGS IN GENERAL SETUP MENU ..................................
Résumé du contenu de la page N° 6
14. ADVANCED SETTINGS ............................................................................................................. 71 14.0 NAVIGATE ...................................................................................................................... 71 14.1 COMPASS ...................................................................................................................... 72 14.2 INPUT/OUTPUT (NMEA) .....................................................................
Résumé du contenu de la page N° 7
19.5.0 Enabling the Call Waiting Feature .................................................................. 103 19.5.1 Reviewing Received Calls Logged into the Call Waiting Directory ................ 103 19.5.2 To Delete the Received Log from the “DSC Log" Directory ........................... 104 19.6 GROUP CALL .................................................................................................................. 105 19.6.0 Setting up a Group Call ...................................
Résumé du contenu de la page N° 8
1. INTRODUCTION 1.0 GENERAL INFORMATION The CPV350 is a WAAS GPS chart plotter, Class D DSC 25 W VHF with a powerful 30 W loud hailer capable of listen-back, fog signaling, bells, whistles integrated one box. The CPV350 has 2 connections for CMP25 RAM+ or VH-310 telephone style handset second stations. Connect the optional FF520, and the CPV350 becomes a full function 50/200 kHz fish finder shown on the high-resolution sunlight viewable 16:9 aspect ratio Wide Screen display in a full page or a s
Résumé du contenu de la page N° 9
1.1 PACKING LIST When the package containing the GPS chartplotter is first opened, please check for the following contents. If any parts are missing contact the dealer this GPS chartplotter was purchased from. Accessories and replacement parts may be ordered from STANDARD HORIZON’s Parts Department at 562/404-2700 Ext. 351 or via the web at www.standardhorizon.com. 1.1.0 Packing List CPV350 GPS Chart Plotter with VHF FM Marine Transceiver GPS WAAS Smart antenna Microphone Dust Cover DC
Résumé du contenu de la page N° 10
1.3 SAFETY / WARNING INFORMATION This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control the exposure conditions of its passengers and bystanders by maintaining the minimum separation distance of 0.6 m (2 feet). Failure to observe these restrictions will result in exceeding the FCC RF exposure limits. 1.3.0 VHF Marine Antenna Installation The antenna must be located at least 0.6 m (2 feet) away from passengers in orde
Résumé du contenu de la page N° 11
1.4 FCC RADIO LICENSE INFORMATION Vertex Standard radios comply with the Federal Communication Commission (FCC) requirements that regulate the Maritime Radio Service. 1.4.0 Station License An FCC ship station license is no longer required for any vessel traveling in U.S. waters (except Hawaii) which is under 20 meters in length. However, any vessel required carrying a marine radio on an international voyage, carrying a HF single side band radiotelephone or marine satellite terminal is required t
Résumé du contenu de la page N° 12
2. GETTING STARTED 2.0 MOUNTING THE GPS CHARTPLOTTER The CPV350 is supplied with hardware for bracket or flush mounting. Below are pictures showing actual examples of the two types of installation. 2.1 BRACKET MOUNTING The CPV350 can be mounted using the supplied bracket. Before installing ensure the area the CPV350’s bracket is mounted to is strong enough to support the weight of the CPV350 especially while under way. After the location is found, attach the mounting base to the area using t
Résumé du contenu de la page N° 13
2.2 FLUSH MOUNTING The CPV350 is supplied with a flush mount template for the cutout hole and screw holes required to install the CPV350. NOTE Before drilling holes ensure there are no obstructions behind the location that could interfere with the mounting and there is physically enough room to mount the CPV350. 1. After a location is found, peal the template label from the backing and apply the label to the mounting area. 2. Drill a hole in one area of the cut area that will allow the blade o
Résumé du contenu de la page N° 14
2.3 CONNECTIONS The CPV350 has a cable or connectors that are used to connect the CPV350 to Power Supply, to the GPS WAAS Smart antenna, optional FF520 50/200kHz BLACK BOX FISH FINDER and to NMEA devices such as VHF's, digital instruments and autopilots as shown in the image below: External Speaker PA GPS VHF Horn Antenna Antenna Autopilot FF520 Fish Finder CPV350 Figure 2.4 Installing the GPS WAAS Smart antenna 2.3.0 Rear Panel Connections 1. VHF ANTENNA JACK Connects an antenna to the transcei
Résumé du contenu de la page N° 15
1 2 3 4 5 6 7 Figure 2.5 CPV350 Rear Panel 2.3.1 VHF Antenna ABOUT VHF RADIO The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with some shore stations available between 161 and 163 MHz. The marine VHF band provides communications over distances that are essentially “line of sight” (VHF signals do not travel well through objects such as buildings, hills or trees). Actual transmission range depends much more on antenna type, gain and height than on the power output of
Résumé du contenu de la page N° 16
2.3.3 Coaxial Cable VHF antennas are connected to the transceiver by means of a coaxial cable - a shielded transmission line. Coaxial cable is specified by its diameter and construction. For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice. For runs over 20 feet but less than 50 feet, the larger RG-8X should be used for cable runs over 50 feet RG213 should be used. For installation of the connector onto the coaxial cable refer to the figure below. Figure 2.4.0 Install
Résumé du contenu de la page N° 17
2.3.4 Optional Enhanced Second VHF/PA Station INSTALLATION The CPV350 is capable of using up to 2 Enhanced RAM+ mics or VH-310 Handset to remotely control the Radio, DSC, and Distress functions. In addition the CPV350 can operate as a full function intercom system. 1. Connect the Routing Cable to the one of the Remote Mic eight pin connector on the rear panel, then tighten the Cable Nut. 2. Referring to Figure 3, make a 1.2” (30 mm) hole in the wall, then insert the Routing Cable into this hole.
Résumé du contenu de la page N° 18
Remote Mic or External Speaker Selection By default the RAM+ or VH-310 Handset internal speaker is turned on, however using the RAM+ mic (or VH-310 Handset) this speaker can be turned off so the external speaker can be used. RAM+ mic procedure 1. Press and hold the [CALL/SET] key. 2. Press the [] or [] key to select RADIO SETUP. 3. Press the [CALL/SET] key. 4. Press the [] key to until EXT SPK is shown and press the [CALL/SET] key. 5. Press the [] or [] key to select oF (External speaker of
Résumé du contenu de la page N° 19
2.3.5 NMEA Connections NOTE The CPV350 can send many sentences to external NMEA devices. The NMEA output wires are Brown and White and the NMEA Common is Green. If you have connected devices as shown in the below table and need to feed NMEA to other devices (Autopilot, Radar ....) you can parallel wires from the Brown or White wires. Pin Wire Color Description Connection Example Additional Information 1 Black - - - No Connection 2 Red - - - No Connection 3 Green NMEA Common Common for NMEA de
Résumé du contenu de la page N° 20
2.3.8 Outputting GPS Coordinates Some PC programs use NMEA sentences from a GPS to show position. The CPV350 outputs GLL, RMB and RMC. PC DB9 Connection CPV350 Connection Pin 2 Brown wire Pin 4 Green 2.3.9 NMEA Data Page The NMEA Data Page is very useful to see if an External device (example: Depth Sounder) is transmitting NMEA sentences to the GPS chart plotter. This page can also be used to see if the GPS chart plotter NMEA output is being loaded down by an external NMEA device Example: Autopi
