Résumé du contenu de la page N° 1
For Serial Nos.
440,000 & Higher
Part No. 103-5505 Rev. A
Résumé du contenu de la page N° 2
WARNING POTENTIAL HAZARD ♦ This product is a piece of power equipment. WHAT CAN HAPPEN ♦ Failure to follow safe operating practices can result in serious operator injury or even death. HOW TO AVOID THE HAZARD ♦ Keep all shields, guards, and safety devices (especially the grass discharge system) in place and in proper working condition. ♦ Stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key before adjusting, servicing, or performing
Résumé du contenu de la page N° 3
EXMARK PARTS PLUS PROGRAM EFFECTIVE DATE: September 1, 1995 Program If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE* Guaranteed!! How the Program Works 1. If dealer does not have part in stock for a "down" unit at the time of request by customer, the dealer contacts his distributor by 1:00 p.m., local time, and requests Exmark Parts Plus shipment of six (6) line items or
Résumé du contenu de la page N° 4
CONGRATULATIONS on the purchase of your Exmark Mower. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation. OPERATOR'S MANUAL This manual contains assembly, operating, maintenance, adjustment, and safety instructions for your Exmark mower. BEFORE OPERATING YOUR MOWER, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY. By following the operating, maintenance, and safety instructions, you will
Résumé du contenu de la page N° 5
TABLE OF CONTENTS 1. SAFETY PAGE 1.1 Safety Alert Symbol .........................................................................................1 1.2 Training............................................................................................................1 1.3 Preparation ...................................................................................................1-3 1.4 Operation.......................................................................
Résumé du contenu de la page N° 6
1. SAFETY 1.1 SAFETY ALERT SYMBOL This SAFETY ALERT SYMBOL is used both in this manual and on the machine to identify important safety messages which must be followed to avoid accidents. This symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! The safety alert symbol appears above information which alerts you to unsafe actions or situations and will be followed by the word DANGER, WARNING, or CAUTION. DANGER: White lettering / Red background. Indicates an imminently
Résumé du contenu de la page N° 7
1.3.4 Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects which may damage the equipment or cause personal injury to the operator or bystanders. WARNING POTENTIAL HAZARD ♦ Engine exhaust contains carbon monoxide, which is an odorless deadly poison. WHAT CAN HAPPEN ♦ Carbon monoxide can kill you. HOW TO AVOID THE HAZARD ♦ Do not run engine indoors or in a small confined area where dangerous ca
Résumé du contenu de la page N° 8
DANGER POTENTIAL HAZARD ♦ In certain conditions gasoline is extremely flammable and highly explosive. WHAT CAN HAPPEN ♦ A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage. HOW TO AVOID THE HAZARD ♦ Purchase and store gasoline only in an approved container. ♦ Always place gasoline containers on the ground away from your vehicle before filling. ♦ Do not fill gasoline containers inside a vehicle or on
Résumé du contenu de la page N° 9
1.4 OPERATION Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing. WARNING POTENTIAL HAZARD ♦ Operating eng
Résumé du contenu de la page N° 10
DANGER POTENTIAL HAZARD ♦ Mowing on wet grass or steep slopes can cause sliding and loss of control. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Do not mow slopes when grass is wet. ♦ Do not mow near drop-offs or near water. ♦ Do not mow slopes greater than 15 degrees. ♦ Reduce speed and use extreme caution on slopes. ♦ Avoid sudden turns or rapid
Résumé du contenu de la page N° 11
WARNING POTENTIAL HAZARD ♦ There is no rollover protection when the roll bar is down. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Keep the roll bar in the raised and locked position and use seat belt. ♦ Lower the roll bar only when absolutely necessary. ♦ Do not wear seat belt when the roll bar is down. ♦ Drive slowly and carefully. ♦ Raise the ro
Résumé du contenu de la page N° 12
1.4.17 Do Not mow with the discharge deflector raised, removed or altered unless there is a grass collection system or mulch kit in place and working properly. 1.4.18 Be aware of the mower discharge and direct discharge away from others. 1.4.19 Do Not operate mower under the influence of alcohol or drugs. 1.4.20 Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. 1.4.21 If jump starting is required: a) connect the positive (+) pow
Résumé du contenu de la page N° 13
WARNING POTENTIAL HAZARD ♦ Hydraulic fluid escaping under pressure can penetrate skin and cause injury. WHAT CAN HAPPEN ♦ Fluid accidentally injected into the skin must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result. HOW TO AVOID THE HAZARD ♦ Make sure all hydraulic fluid hoses and lines are in good condition an all hydraulic connections and fittings are tight before applying pressure to hydraulic system. ♦ Keep
Résumé du contenu de la page N° 14
1.6 SAFETY SIGNS 1.6.1 Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels. 1.6.2 Safety signs must be replaced if they are missing or illegible. 1.6.3 When new components are installed, be sure that current safety signs are affixed to the replaced components. 1.6.4 New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc. 1.6.5 Safety signs may be affixed b
Résumé du contenu de la page N° 15
PART NO. 1-643401 LOCATION: On Tilt Switch PART NO. 1-513748 LOCATIONS: Bottom Side of Floorpan PART NO. 1-403005 PART NO. 103-3270 LOCATION: Left and Right Corners LOCATION: Rear RH Side of PART NO. 1-513742 of Mower Deck Radiator Mount LOCATION: Top of Mower Deck Belt Plate Shields, Left and Right Sides PART NO. 1-643222 PART NO. 103-1077 LOCATION: Left of Center on Mower LOCATION: LH Side on Top Front of Deck, Under Floor Pan Mower Deck PAR
Résumé du contenu de la page N° 16
PART NO. 1-303508 PART NO. 1-643339 LOCATION: RH Side on Top LOCATION: Top of Right Engine Baffle Rear of Mower Deck PART NO. 1-523552 LOCATION: Top of Hydraulic Reservoir, Under the Seat PART NO. 1-633462 LOCATION: Rubber Heat Shield Flap behind Seat PART NO. 1-323540 LOCATION: Left Rear Corner Top of Mower Deck PART NO. 103-1027 PART NO. 103-0223 LOCATION: RH Radiator LOCATION: LH Side on Top Side Plat
Résumé du contenu de la page N° 17
2. SPECIFICATIONS 2.1 MODEL NUMBER: Serial Nos. 440,000 and Higher: LZ27LKA604; LZ27LKA724 2.2 ENGINE: 2.2.1 Engine Specifications: See your Engine Owner’s Manual 2.2.2 RPM: Full Speed: 3750 RPM (No Load) Idle: 2200 RPM 2.3 FUEL SYSTEM 2.3.1 Capacity: 13.5 gal. (51 L.) 2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher 2.3.3 Fuel Filter: In-line 40 Micron Kawasaki P/N 49019-1055 2.3.4 Fuel Shut-Off Valve: 1/4 turn increments (left tank, “OFF”
Résumé du contenu de la page N° 18
2.7 SEAT 2.7.1 Type: Standard seat with high back, foam padded (internal suspension) and armrests. Optional seat accessories: • Custom ride suspension system to enhance Standard Seat • Deluxe suspension seat with high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) and armrests. 2.7.2 Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with prop rod. Adjustable fore and aft seat tr
Résumé du contenu de la page N° 19
Deck Depth: 60” Deck: 5.5” (14.0 cm) 72” Deck: 5.5” (14.0 cm) 2.10.7 Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the cutting height from 1 1/2” (3.8 cm) to 5” (10.2 cm.) in 1/4” (.64 cm) increments. The cutting height adjustment handle has a transport position and all adjustments can be made while the operator remains seated. Units also have a foot operated deck lift assist lever to aid in raising the deck. 2.10.8 Mulching Kit: Optional. 2.1
Résumé du contenu de la page N° 20
3. ASSEMBLY INSTRUCTIONS 3.1 UNCRATE MOWER 3.2 INSTALL ROLLOVER PROTECTION SYSTEM (ROLL BAR) 3.2.1 Disassemble roll bar from the crate. a) Remove roll bar tubes from sides of crate and remove screws that attach the wheel hub retaining plate to the bottom of the crate. b) Remove the two brackets used to mount the bottom of the upper roll bar tube to the crate. Remove the 1/2-13 x 3 1/4 capscrews and 1/2-13 hex flange lock nuts from the two brackets at each end of the upper roll
