Résumé du contenu de la page N° 1
111-0444(A) 19/1/06 8:55 am Page 1.1
Envoy
CODE
100D
OWNER'S HANDBOOK
(English Version)
CODE FROM SERIAL NO:
100D 260000001 HANDBOOK: 111-0444(REV .A.)
ISSUE: 28.11.05
Résumé du contenu de la page N° 2
111-0444(A) 19/1/06 8:55 am Page 1.2 MAIN FEATURES /SPECIFICATIONS Main Features 4 1 Handlebar Securing Knob. 2 Cable. 3 3 Switch Control Unit. 5 4 Bail Arm. 5 Handlebar. 6 Cable Cleat. 1 7 Grassbag Assembly. 6 8 Rear Deflector. 9 Serial No. Decal. 10 Height of Cut Lever 2 11 Motor Housing 1 8 1 7 9 11 10 Specifications Code 100D Supply 220-240V~50Hz Rated Input 1.4 kW Fuse Rating 13A Weight 23 Kg Cutterblade Speed 2800 rpm Cutting width 360mm Cutting height 13 - 60mm Overall dimensions 1
Résumé du contenu de la page N° 3
111-0444(A) 19/1/06 8:55 am Page 1.3 CONTENTS 1.2 Main Features/Specifications 1.19 - 1.22 Mower Maintenance 1.19 - Deck Housing 1.3 Contents 1.19 - Securing Nuts and Bolts 1.19 - Lubrication 1.4 Introduction 1.19 - Motor 1.19 - Switch Control Unit 1.5 Warranty 1.20 - Cutterblade Removal 1.21 - Cutterblade Sharpening 1.6 - 1.9 Safety Precautions 1.21 - Supply Cable 1.22 - Storage 1.9 Safety Symbols 1.9 Control Symbols 1.23 - 1.24 Trouble Shooting 1.10 Assembling the Mower 1.25 EC Declara
Résumé du contenu de la page N° 4
111-0444(A) 19/1/06 8:55 am Page 1.4 INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls an
Résumé du contenu de la page N° 5
111-0444(A) 19/1/06 8:55 am Page 1.5 WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material or workmanship under normal use for a period of two years from the date of purchase. To qualify for the full benefit of the warranty, the warranty registration card must be returned to Hayter Limited within 14 days of purchase. If the selling dealer has not returned the Warranty Registration Card which is attached to the r
Résumé du contenu de la page N° 6
111-0444(A) 19/1/06 8:55 am Page 1.6 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Read the instructions carefully. Ensure that you are familiar with the controls and the proper use of the equipmen
Résumé du contenu de la page N° 7
111-0444(A) 19/1/06 8:55 am Page 1.7 SAFETY PRECAUTIONS Preparation Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts and screws for tightness. Use only gen- uine Hayter parts. A damaged cutterblade and loose fixing bolt are major hazards. Before use, visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immediately with a genuine Hayter replacement part. Cutterblades which are slight
Résumé du contenu de la page N° 8
111-0444(A) 19/1/06 8:55 am Page 1.8 SAFETY PRECAUTIONS Operation Use extreme caution when reversing or pulling the mower towards you. Switch off if the mower has to be tilted for transportation when cross- ing surfaces other than grass and when transporting the mower to and from the area to be mowed. Never operate the mower unless the guards are securely in position and in good condition. Start the mower carefully, with feet well away from the cutterblade. Do not tilt the front of the mower
Résumé du contenu de la page N° 9
111-0444(A) 19/1/06 8:55 am Page 1.9 SAFETY PRECAUTIONS Safety Symbols Safety Alert - Be aware to the Danger of severing toes or fin- Danger of being hit by thrown possibility of injury. gers in cutting mechanism. objects. Carefully read the Owners Switch off and remove plug Keep bystanders at a safe dis- Handbook before using the from mains before performing tance from the mower. machine. maintenance or repair work. Do not use in rain or in wet Wait until all machine compo- Danger of Electr
Résumé du contenu de la page N° 10
111-0444(A) 19/1/06 8:55 am Page 1.10 ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Instruction Sheet 2. Grassbag Frame 3. Grassbag Top Cover 4. Grassbag Fabric 5. Supply Cable To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the
Résumé du contenu de la page N° 11
111-0444(A) 19/1/06 8:55 am Page 1.11 OPERATING THE MOWER Electrical Connection Position the mower on the grass area to be cut. Carefully uncoil the supply cable clear of the mower. Ensure that the mains socket is switched 'OFF' before connecting. Switch 'ON'. Note: We recomend the use of a RCCB unit- Refer to "Safety Precautions" - Preparation. Starting Locate the bail arm lever mounted on the handlebar and ensure that your feet are clear of the mower deck. Depress the safety button with th
Résumé du contenu de la page N° 12
111-0444(A) 19/1/06 8:55 am Page 1.12 OPERATING THE MOWER Stopping Release the bail arm to stop the motor. WARNING: AVOID ACCIDENTS - The cutterblade may contin- ue to rotate after the mower is switched off Height of Cut Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings. Always sel
Résumé du contenu de la page N° 13
111-0444(A) 19/1/06 8:55 am Page 1.13 OPERATING THE MOWER Grassbag To empty the grassbag raise the rear deflector and pass the grassbag under the handlebar and lower the rear deflector to rest against the rear of the mower. Pour out the grass clippings and shake the grassbag vigorously to clean the airways. Good grass collection depends on good air flow through the grassbag. When collecting grass clippings it is important that the grassbag is emptied regularly to prevent blockages and motor
Résumé du contenu de la page N° 14
111-0444(A) 19/1/06 8:55 am Page 1.14 OPERATING THE MOWER Safe Mower Practice WARNING: PREVENT ACCIDENTS -Take extreme care do not mow across the supply cable. If this should occur, switch off immedi- ately and disconnect the plug from the power supply. Carefully exam- ine the cable for cuts and damage. A defective cable must be replaced before the mower is used again. Always be aware of the location of the supply cable in relationship to the mower and the grass area. Do not allow the cable t
Résumé du contenu de la page N° 15
111-0444(A) 19/1/06 8:55 am Page 1.15 OPERATING THE MOWER Overloading Protection Do not let the motor labour or slow down through being overloaded in work. When this situation occurs, raise the front of the mower slightly by bearing down on the handlebar, allow the motor to reach maximum speed and proceed to mow at a slower pace. Alternatively readjust to a higher cut position. If the motor continues to labour, switch off and remove the plug from the mains supply. Remove and empty the grass-
Résumé du contenu de la page N° 16
111-0444(A) 19/1/06 8:55 am Page 1.16 LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The f
Résumé du contenu de la page N° 17
111-0444(A) 19/1/06 8:55 am Page 1.17 LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sa
Résumé du contenu de la page N° 18
111-0444(A) 19/1/06 8:55 am Page 1.18 MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. Daily Remove grass debris from around the height of cut ratchet, air filter in the cowl and the underside of the deck housing. Remove grass debris from the grassbag and check for si
Résumé du contenu de la page N° 19
111-0444(A) 19/1/06 8:55 am Page 1.19 MOWER MAINTENANCE Deck Housing Remove grass debris from the top and underside of the deck housing immediately after use. Securing Fasteners Regularly check that all securing nuts and bolts are tight. Replace missing or damaged items immediately. Bolt - Cutterblade fixing Torque 20Nm Plastic Screws - Bottom of Handlebar Torque 3.5Nm 1CG480V36B General Screws - Used on plastic parts 1.5Nm (Note: Use manual handtools only). Lubrication Lubricate the wheels,
Résumé du contenu de la page N° 20
111-0444(A) 19/1/06 8:55 am Page 1.20 MAINTENANCE MOWER Cutterblade Removal Turn the mower on its side. Firmly grip the end of the cutterblade (2) with a gloved hand and remove bolt (1). When replacing ensure that the new cutterblade is the 2 correct way up with the turned edges facing towards the motor before locating onto the two carrier pins. Secure the cutterblade fixing nylon 1 bolt and tighten to the specified torque of 20Nm. The cutterblade has sharp edges. ALWAYS wear strong gloves to
