Instruction d'utilisation Lenmar Enterprises 3312V

Résumé du contenu de la page N° 1

OPERATING INSTRUCTIONS
®
OmniSource 3312V / Model BCR3312V
For NiMH, NiCd & Lead Acid Batteries
INTRODUCTION
Thank you for purchasing LENMAR’s OmniSource 3312V. The model BCR3312V can charge almost any 4.8, 6, 7.2, 9.6, 10 or 12V Volt NiMH,
NiCd or Lead Acid rechargeable battery, but is not compatible with Li-Ion batteries. When recharging NiCd type batteries, the BCR3312V will
operate as an AC/DC Battery Charger and Reconditioner to help avoid developing memory in your battery.

Thi

Résumé du contenu de la page N° 2

If the battery has End or Side contacts Open the hinged jaw on the charger to unlock the moveable contacts. Pull up on the charger contacts to raise them above the top deck of the charger and expose the side facing contacts. Set the battery to be charged on the deck of the charger and against the fence (marked “D”) with its contacts facing the charger’s contacts. For large batteries or in some circumstances, the “D” fence may need to be reversed or removed to make more room for the batt

Résumé du contenu de la page N° 3