Résumé du contenu de la page N° 1
IMPORTANT MANUAL Do Not Throw Away
02153
WARNING:
OWNER'S MANUAL
Read this Owner's Manual and
fol low all Warnings and Safety
In struc tions. Failure to do so can
MODEL:
result in serious injury.
PD25PH48STC
LAWN TRACTOR
Always Wear Eye Protection During Operation
191177 1.22.04 RD
Printed in U.S.A.
Résumé du contenu de la page N° 2
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. Avoid starting or stopping on a slope. If tires lose trac- I. GENERAL OPERATION tion, disengage the blades and proceed slowly straight Read, understand, and follow all instructions in the down the slope. manual and on the machine before
Résumé du contenu de la page N° 3
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. WARNING: In order to prevent ac ci - den tal starting when setting up, trans- Never carry passengers or children even with the blades off. port ing, ad just ing or making repairs, al ways dis con nect spark plug wire Do not mow in reverse unless absolutely necessary. Al ways and place wire where it can not contact look
Résumé du contenu de la page N° 4
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu factured to giv e you the best possible dependability and performance. Gasoline Capacity 4.0 Gallons and type: Unleaded Regular Should you experience any problem you cannot easily rem- edy, please contact your nearest authorized service center/ Oil Type (API-SF-SJ): SAE 30 (above 32°F) department. We have competent, well-trained tech ni cians SAE 5W-30 (below 32°F) and
Résumé du contenu de la page N° 5
UNASSEMBLED PARTS Gauge Wheels Steering Wheel (4) Shoulder Bolts (4) Wheels (4) Adjusting Bars Steering Sleeve Steering Sleeve Extension (4) Clevis Pins (4) Washers 3/8 x 3/4 x 14 Ga. Steering Wheel Adapter Steering Wheel Insert (4) Retainer Springs (4) Locknuts 3/8-16 (double loop) Seat Nose Roller Rod (2) Locknuts (1) Washer 5/16-18 17/32 x 1-3/16 x 12 Gauge Retainer Spring (1) Knob Nose Roller Brackets Mower (5) Retainer Springs (2) Hex Bolts (double loop) 5/16-18
Résumé du contenu de la page N° 6
02173 ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping pur- poses. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING WHEEL A socket wrench set will make assembly easier. Stan dard INSERT wrench sizes are listed. LOCK NUT (2) 9/16" wrench Utility knife LAR
Résumé du contenu de la page N° 7
ASSEMBLY INSTALL SEAT (See Fig. 3) TO DRIVE TRACT OR OFF SKID (See Op- er a tion section for location and function of Adjust seat before tightening adjustment knob. con trols) Remove adjustment knob and fl at washer securing seat to cardboard packing and set aside for assembly WARNING: Before start ing, read, un der stand and fol low of seat to tractor. all in struc tions in the Op era tion section of this manu al. Be Pivot seat upward and remove from the cardboard pack- sure tr
Résumé du contenu de la page N° 8
02510 ASSEMBLY Lower mower linkage with attachment lift control. TO ATTACH NOSE ROLLER (See Fig. 5) Assemble brackets "A" and "B" to the inside of mower Be sure belt tension rod is in dis en gaged position. mounting brackets as sho wn. Tighten securely. Install belt into electric clutch pulley groove. Place the suspension arms on outward pointing deck NOTE: Be sure bracket tabs are po si tioned in tab holes in mower brackets. pins. Retain with double loop re tain e
Résumé du contenu de la page N° 9
ASSEMBLY CHECK TIRE PRESSURE ✓CHECKLIST The tires on your tractor were overinfl ated at the factory BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- for shipping purposes. Correct tire pressure is important T OR, WE WISH TO ASSURE THAT YOU RECEIVE THE for best cutting performance. BEST PER FOR MANCE AND SATISFACTION FROM THIS Reduce tire pressure to PSI shown in “PRODUCT QUALITY PROD UCT. SPEC I FI CA TIONS” section of this manual. PLEASE REVIEW THE FOLLOWING CHECKLIST: ✓ All assembly inst
Résumé du contenu de la page N° 10
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. HIGH LOW FAST SLOW IGNITION REVERSE NEUTRAL CHOKE P LIGHTSON ENGINEON ENGINESTART PARKINGBRAKE ENGINEOFF PARKINGBRAKE PARKINGBRAKE LOCKED UNLOCKED OILPRESSURE BATTERY REVERSE OVERTEMP FUEL FORWARD MOWERHEIGHT MOWERLIFT LIGHT 15 15 ATTACHMENT ATTACHMENT SLOPEHAZARDS CLUTCHENGAGED DANGER,KEEPHANDS KEEPAREACLEAR CLUTCHDISENGAGED ANDFEETAWAY (SEESAFETYRULESSECTION) DA
Résumé du contenu de la page N° 11
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. LIGHT SWITCH AMMETER HOURMETER POSITION IGNITION CHOKE AT TACHMENT SWITCH CLUTCH SWITCH CONTROL LIFT LEVER PLUNGER THROTTLE CONTROL 0 60 60 ELAPSED TIME 0000000000 AMPS HOURS 1/10 ATTACHMENT BRAKE LIFT LEVER PEDAL REVERSE DRIVE
Résumé du contenu de la page N° 12
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles 00155 or stan dard safety glasses. HOW TO USE YOUR TRACTOR CAUTION: Always stop tractor com- plete ly, as described above, before leav- TO SET PARKING BRAKE (See Fig. 8) ing the operator'
Résumé du contenu de la page N° 13
02142 01977 OPERATION TO STOP MOWER BLADES - disengage attachment The cutting height range is approximately 1-1/2" to 4". The heights are measured from the ground to the blade tip with clutch con trol. the engine not running. These heights are ap proxi mate and may vary depending upon soil conditions, height of grass CAUTION: Do not operate the mower and types of grass being mowed. without either the en tire grass catcher, on mowers so equipped, or the de fl ec tor The average
Résumé du contenu de la page N° 14
OPERATION NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed CAUTION: Alcohol blended fuels (called gasohol and secured to tractor. Use an appropriate means of tying or using ethanol or methanol) can attract mois- hood to tractor (rope, cord, etc.). ture which leads to sep a ra tion and for ma tion of acids during stor age. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fu
Résumé du contenu de la page N° 15
OPERATION AUTOMATIC TRANSMISSION WARM UP MOWING TIPS Before driving the unit in cold weather, the trans mis sion Mower should be properly leveled for best mowing per- should be warmed up as follows: formance. See “TO LEVEL MOWER HOUSING” in the Be sure the tractor is on level ground. Service and Adjustments section of this manual. Release the parking brake and let the brake slowly The left hand side of mower should be used for trim- return to operating po si tion. ming
Résumé du contenu de la page N° 16
maint_sch-tractore.new1 MAINTENANCE MAINTENANCESCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T R Check for Loose Fasteners 5 A Sharpen/Replace Mower Blades 3 C Lubrication Chart T Check Battery Level 4 0 Clean Battery and Terminals R Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1,2 Change Engine Oil (without oil filter) 1,2 E Clean Air
Résumé du contenu de la page N° 17
02544 MAINTENANCE TRACTOR MANDREL BLADE ASSEMBLY Always observe safety rules when performing any main- CENTER te nance. HOLE BRAKE OPERATION BLADE BOLT If tractor requires more than six (6) feet stopping distance (SPECIAL) at high speed in highest gear, then brake must be adjusted. STAR (See “TO ADJUST BRAKE” in the Service and Ad just ments section of this manual). TIRES FIG. 13 Maintain proper air pressure in all tires (See “PROD UCT SPECIFICATIONS” section of this man ual). K
Résumé du contenu de la page N° 18
MAINTENANCE Remove terminal guard. Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fi ll Disconnect BLACK battery cable fi rst then RED bat- cap/dipstick securely each time you check the oil level. tery cable and remove battery from tractor. Rinse the battery with plain water and dry. TO CHANGE ENGINE OIL (See Figs. 15 and 16) Clean terminals and battery cable ends with wire brush Determine temperatur
Résumé du contenu de la page N° 19
00667 MAINTENANCE CLEAN AIR INTAKE/COOLING AREAS IN-LINE FUEL FIL TER (See Fig. 17) The fuel fi lter should be re placed once each season. If fuel To insure proper cooling, make sure the grass screen, fi lter becomes clogged, ob struct ing fuel fl ow to car bure tor, cooling fi ns, and other external surfaces of the engine are re place ment is re quired. kept clean at all times. With engine cool, remove fi lter and plug fuel line sec- Every 100 hours of operation (more often under extrem
Résumé du contenu de la page N° 20
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: Depress brake pedal fully and set parking brake. Place attachment clutch in “DISENGAGED” position. Turn ignition key to “STOP” and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO INSTALL MOWER TRACTOR Be sure tractor is on level surface and mow
