Résumé du contenu de la page N° 1
Wine Cooler
Model No. MCWC16MCG MCWC30MCG
Wine Cooler
. Before Putting Into Use . . . . . . . . . . . . . . . . .
2
. Important . . . . . . . . . . . . . . . . . . . . . . . . 3
. Placing and Installation . . . . . . . . . . . . . . . . .
4
. Description of the Appliance . . . . . . . . . . . . . . .
5
. Temperature Control . . . . . . . . . . . . . . . . . . . 5
. Maintenance and Clea
Résumé du contenu de la page N° 2
Wine Cooler Thank you for buying this appliance. We hope it will successfully serve your requirements for many years. This appliance is intended for storing bottled wine in the temperature o o range of 5.5 to 19.0 / 41.9 F to 66.2 F. SAVE THESE INSTRUCTIONS Before Putting Into Use . . . . . . . . . . . . . 2 To Assemble Door Handle Instructions for Use Tips for Energy Savings Important . . . . . . . . . . . .
Résumé du contenu de la page N° 3
Before Putting Into Use · Before connecting the appliance to electrical To Assemble Door Handle power supply, leave it to stand for about 2 hours, (Door handle assembling which will reduce the possibility of malfunctions for MCWC16MCG & MCWC30MCG ) in the cooling system due to transport handling. To save shipping space and avoid damage of · Clean the appliance thoroughly, especially in the the unit during transportation, the door handle interior (See Cleaning and Maintenance). of this
Résumé du contenu de la page N° 4
Important · If you have bought this appliance to replace Disposing of Worn Out an old one equipped with a door lock that Appliances cannot be opened from the inside (lock, bolt), make sure that the lock is removed, disabled or destroyed before discarding. This will make · DANGER OR WARNING: Risk of child entrapment. it impossible for children to accidentally lock Before you throw away your old refrigerator or themselves inside the appliance and suffocate. freezer: · To avoid risk of
Résumé du contenu de la page N° 5
Placing and Installation CHOOSING THE RIGHT PLACE WARNING Place the appliance in a dry and regularly Instructions to avoid to the risk of fire , ventilated room. Never place the appliance near electric shock , or injury to persons. heat emitting devices (e.g. cooking appliances, radiators, water heaters or similar devices) and WIRING INSTRUCTIONS do not expose to direct sunlight. The appliance should be positioned at least 2in. For your personal safety, this appliance must away from electric or
Résumé du contenu de la page N° 6
Description of the appliance (A) Adjustable Wine Shelves (For MCWC16MCG only) Shelves can be optionally placed on the guides inside the appliance where appropriate. Perishable items should be stored towards the back/rear of the shelves. i.e. the coldest part of the shelf. (B) Defrost Water Outlet The interior of the appliance is cooled with a cooling plate mounted in the rear wall. Under the plate there is a channel and an outlet for defrost water. Regularly check the defrost water outlet
Résumé du contenu de la page N° 7
CONTROL KNOB Fig A (MCWC16MCG) Fig B (MCWC30MCG) Changes in ambient room temperature will affect the internal temperatures (choose correct . setting of the thermostat knob). In STOP (0) position the appliance does not operate (cooling system is switched off ), . yet power supply is not interrupted. . Temperature in the appliance also depends on how often the door is opened. ILLUSTRATION OF THE APPLIANCE THERMOSTAT DIAL: 1. For controlling the temperature inside the wine cooler
Résumé du contenu de la page N° 8
Maintenance and Cleaning Switch Off the Appliance Automatic Defrosting of the When Not In Use Appliance There is no need to defrost the cooler , because If you do not intend to use the appliance for long ice depositing on the inner back wall is defrosted periods of time. Set the thermostat knob to the automatically. STOP (0) position, disconnect the power supply, Ice build-up on the inner back wall during the take out the contents and defrost and clean the compressor operation will defro
Résumé du contenu de la page N° 9
Trouble-Shooting Guide . Sometimes you may come across minor problems Ice Formation on the Inner that in most cases do not require a service call Rear Wall and can be easily eliminated. The problem may As long as the defrost water runs to the have resulted from improper handling and / or channel and through the outlet to the drain installation of the appliance. Please refer to the pan on the compressor, automatic defrosting below trouble-shooting guide to assist you in identifying
Résumé du contenu de la page N° 10
Check the accessories on the interior of the Water is Leaking From the appliance, they should be placed correctly in Appliance their positions; also check bottles, tins, and If the discharge water outlet is clogged, or the other vessels are not touching each other defrost water drips over the channel, water will causing rattling and/or vibrations. leak from the appliance. Clean the clogged outlet. . Manually defrost the increased ice layer ( see . ice Formation on the Inner rear Wall ). N
Résumé du contenu de la page N° 11
Changing The Reversible Door CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process. 1. Remove the top hinge assembly and keep them for future use. 2. Remove the bottom hinge assembly and keep them for later use. 3. Remove the plug buttons from the upper left holes and transfer them to the uncovered holes at the right side. Be sure to press the plug buttons firmly into the holes. 4. Take out a new set of top hinge
Résumé du contenu de la page N° 12
Wine Cooler Warranty MC Sales and Marketing, Inc. warrants each new Wine Cooler to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. In addition MC Sales and Marketing, Inc. warrants the compressor (parts only) to be free from defects
