Instruction d'utilisation Snapper - Agco7800784

Instruction d'utilisation pour le dispositif Snapper - Agco7800784

Dispositif: Snapper - Agco7800784
Catégorie: Tondeuse
Fabricant: Snapper
Dimension: 3.23 MB
Date d'addition: 8/6/2014
Nombre des pages: 36
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif Snapper - Agco7800784. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec Snapper - Agco7800784.

Pour votre confort

Si regarder l'instruction Snapper - Agco7800784 directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction Snapper - Agco7800784 en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction Snapper - Agco7800784 sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
Snapper - Agco7800784 Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction Snapper - Agco7800784 - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de Snapper - Agco7800784. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

Operator's Manual
REAR ENGINE RIDING MOWER
SERIES 24
Model No.Description
7800784 2811524BV
7800785 2812524BVE
7800786 3014524BVE
7800787 3317524BVE
!
Manual No. 7104742 (Rev. ‘-’)
Not for
Reproduction

Résumé du contenu de la page N° 2

Thank You for purchasing this quality-built Snapper product. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them. This machine is designed and intended only for finish cutting of established lawns and is not

Résumé du contenu de la page N° 3

Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Features and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Before Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Operator Seat Adjustment

Résumé du contenu de la page N° 4

Operator Safety WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects ! that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must

Résumé du contenu de la page N° 5

Operator Safety Protection against Tipovers Operation (Continued From Previous Column) 1. Mount and dismount machine from left side. Keep clear 7. Keep people and pets out of mowing area. Immediately of discharge opening at all times. STOP blades, STOP engine, and STOP machine if anyone 2. Start engine from operator’s seat, if possible. Make sure enters the area. blades are OFF and parking brake is set. 8. Check shields, deflectors, switches, blade controls and 3. DO NOT leave machine with engi

Résumé du contenu de la page N° 6

Operator Safety Towing Maintenance 1. Tow only with a machine that has a hitch designed for (Continued From Previous Column) towing. DO NOT attach towed equipment except at the hitch 6. Always provide adequate ventilation when running point. engine. Exhaust gases contain carbon monoxide, an odor- 2. Follow the manufacturer’s recommendation for weight less and deadly poison. limits for towed equipment and towing on slopes. 7. Disconnect negative (black) cable from battery before 3. DO NOT allow

Résumé du contenu de la page N° 7

Operator Safety Decal Identification Remove Battery - 7101109 Before Starting - 7101112 Amputation and thrown objects hazard � Keep hands and feet away from deck. WARNING � Do not operate mower unless discharge Fire Hazard. Operation of this equipment chute or entire grass catcher is in its proper may create sparks that can start fires around place. 7101110 dry vegetation. A spark arrestor may be required. The operator should contact local Danger Thrown Objects - 7101110 fire agencies for l

Résumé du contenu de la page N° 8

Operator Safety 7104796 Reverse Lockout - 7104796 7103219 Parking Brake - 7103219 CAUTION Fire Hazard � Do not overfill tank. � IMPORTANT Empty tank before Use only rechargeable valve regulated (sealed) standing unit on end. 7104797 non-spillable batteries in this product. Battery must be factory approved part or equivalent. Fuel Tank - 7104797 Do not overcharge. Non-Spillable Battery - 7105102 WARNING AVOID SERIOUS INJURY OR DEATH Read Operator’s Manual before working with battery. Always we

Résumé du contenu de la page N° 9

Features and Controls IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your dealer if you have questions. J I H G F A E B C D Features and Controls A. Engine Speed Control F. Blade Pedal B. Cutting Height Lever G. Blade Lever C. Ignition Switch H. Steering Wheel D. Clutch/Brake Pedal I. Transmission Shift Lever E. Park Brake Latch J. Fuel Tank 9 Not for Reproduction

Résumé du contenu de la page N° 10

Operation Before Starting Make the following checks and perform the service required before each start-up: 1. Check the tire pressure; add or release air as needed to A bring pressure to 15 PSI in front and 12 PSI in rear. 2. Check guards, deflectors and covers to make sure all are in place and securely tightened. 3. Check engine oil and add oil as needed to bring level up to the FULL mark (A, Figure 1). Refer to the engine manual for oil specifications. Figure 2: Fuel filler cap A Operator Sea

Résumé du contenu de la page N° 11

Operation Starting and Operation Engine (Electric Start) A IMPORTANT: When the ignition key is turned to “START”, the engine will turn over, but will not start unless the Clutch/Brake pedal is pressed all the way down, and the Blade Lever is in the “OFF” position. The operator should be in the seat. Start the engine as follows: 1. Move the transmission shift lever to the (N) Neutral position. Refer to the section entitled “Wheel Drive”. IMPORTANT: DO NOT start the engine with the transmissio

Résumé du contenu de la page N° 12

Operation Starting and Operation (Continued) A Engine (Electric Start) (Continued) 8. Should the battery be too weak to start the engine, refer to the Section entitled “Engine (Manual Start)” to manually start the electric start engines. 9. On Model 3317524BVE, the engine is equipped with a fuel shut-off solenoid. If the battery is dead, the engine can be started with the recoil back-up starter if the engine speed control is in the choke position (HOT engine or COLD engine). B Engine (Manual S

Résumé du contenu de la page N° 13

Operation WARNING WARNING ! ! ! ! Once blade is disengaged, it should come to a complete DO NOT operate blades in reverse. STOP BLADES. LOOK stop in 3 seconds or less. If the blade continues to rotate and SEE behind and down for children, pets and hazards after 3 seconds, the blade brake must be adjusted. Refer to before and while backing. Section “BLADE BRAKE ADJUSTMENT” for adjustment procedures or return machine to an authorized dealer for adjustment. DO NOT CONTINUE to operate machine until

Résumé du contenu de la page N° 14

Operation Mower Blade WARNING ! ! 1. Stop the mower blade by releasing the blade pedals (A, DO NOT leave the machine with the engine running. STOP Figure 15) or moving the blade lever (B) rearward to the Blade. STOP engine. Shift to neutral and engage park brake. “OFF” position. Remove key. B Stopping - Engine, Wheel Drive, Blade Engine 1. Stop the engine by turning the key (A, Figure 13) to the “OFF” position. A Figure 15: Stopping the mower blade A WARNING ! ! Once blade is disengaged, it shou

Résumé du contenu de la page N° 15

Operation Cutting Height Adjustment Stopping - Engine, Wheel Drive, 1. Adjust the cutting height by raising or lowering the deck Blade (Continued) lift lever (A, Figure 18) into the desired height of cut notch (B). Park Brake 1. To set the park brake, press the clutch/brake pedal (A, Figure 16) all the way down, slide the park brake latch (B) all the way in to the engaged position, and release the clutch/brake pedal. A detent in the park brake latch will keep the park brake engaged. ! WARNING !

Résumé du contenu de la page N° 16

Operation Reverse Lockout Mechanism Override Reverse Lockout Mechanism 1. Stop the machine. Stop the blade. 2. Depress and hold the Override Lever. Data indicates that tragic back-over accidents occur each 3. Depress and hold the Blade Pedals. Release the year. These accidents usually involve unsupervised children. Override Lever. Many times these children have been given rides on the 4. Move the blade lever forward to “ON” position. machine and have been trained to view this potentially dan-

Résumé du contenu de la page N° 17

Maintenance Maintenance Chart TRACTOR AND MOWER ENGINE Every 8 Hours or Daily First 5 Hours Check safety interlock system Change engine oil Clean debris off tractor and mower deck Every 8 Hours or Daily Clean debris from engine compartment Check engine oil level Every 25 Hours or Annually * Every 25 Hours or Annually * Check tire pressure Clean engine air filter and pre-cleaner ** Check mower blade stopping time Every 50 Hours or Annually * Check tractor/mower for loose hardware Change engine oi

Résumé du contenu de la page N° 18

Maintenance Service Engine Air Cleaner WARNING ! ! The engine is equipped with a dual element air cleaner. Both DO NOT attempt any adjustments, maintenance, service or the foam pre-cleaner and cartridge require service. Refer to repairs with the engine running. STOP engine. STOP blade. the Engine Manual for recommended service procedures. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine Check Mower Blade and components are HOT. Avoid seri

Résumé du contenu de la page N° 19

Maintenance WARNING ! ! DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine B and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap must be closed securely to prevent fuel spillage. A Check the Blade Drive Belt The blade drive consists of a single belt from the engine to t

Résumé du contenu de la page N° 20

Maintenance Safety Interlock System Checks Check Engine 1. Change the engine oil. Refer to the section entitled “CHANGE ENGINE OIL”. Refer to the engine manual for ! WARNING ! oil specifications. DO NOT operate machine if any safety interlock or safety 2. Change the air filter: device is not in place and functioning properly. DO NOT � Pull up and rotate the air cleaner latch (A, Figure attempt to defeat, modify or remove any safety device. 23) to remove the air cleaner cover (B). Engine must n


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 Snapper "MR" SERIES 17 EMRP216517B Manuel d'utilisation Tondeuse 22
2 Snapper "MR" SERIES 17 MR216017BV Manuel d'utilisation Tondeuse 5
3 Snapper "MR" SERIES 17 MR216517B Manuel d'utilisation Tondeuse 8
4 Snapper "MR" SERIES 17 MR216017B Manuel d'utilisation Tondeuse 1
5 Snapper "MR" SERIES 17 MRP216017B Manuel d'utilisation Tondeuse 3
6 Snapper "MR" SERIES 17 WMR216517B Manuel d'utilisation Tondeuse 0
7 Snapper "MR" SERIES 17 WMR216017B Manuel d'utilisation Tondeuse 1
8 Snapper "MR" SERIES 17 MRP216517B Manuel d'utilisation Tondeuse 2
9 Snapper "MR" SERIES 17 WMR216017BV Manuel d'utilisation Tondeuse 1
10 Snapper "MR" SERIES 17 MRP216017BV Manuel d'utilisation Tondeuse 1
11 Snapper "MR" SERIES 17 WMRP216017B Manuel d'utilisation Tondeuse 0
12 Snapper "MR" SERIES 17 WMRP216517B Manuel d'utilisation Tondeuse 1
13 Snapper 0 Manuel d'utilisation Tondeuse 0
14 Snapper 0-7001 Manuel d'utilisation Tondeuse 2
15 Snapper 06124 Manuel d'utilisation Tondeuse 0
16 2Wire 7-1/4 Inch Circular Saw 94245 Manuel d'utilisation Tondeuse 3
17 Agilent Technologies E4371A Manuel d'utilisation Tondeuse 0
18 Agilent Technologies E4370A Manuel d'utilisation Tondeuse 3
19 Agilent Technologies E4374A Manuel d'utilisation Tondeuse 1
20 Adams 22 Manuel d'utilisation Tondeuse 1