Résumé du contenu de la page N° 4
One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply
Résumé du contenu de la page N° 5
PRECAUTIONS Observe the following precautions to prevent fire, personal injury, and transceiver damage. • Do not modify or attempt to adjust this transceiver for any reason. • Do not expose the transceiver to long periods of direct sunlight, nor place it close to heating appliances. • Do not place the transceiver in excessively dusty, humid, and/or wet areas, nor on unstable surfaces. • If an abnormal odor or smoke is detected coming from the transceiver, switch OFF the power immediately and rem
Résumé du contenu de la page N° 6
CONTENTS UNPACKING AND CHECKING EQUIPMENT .......................... 1 SUPPLIED ACCESSORIES ................................................ 1 PREPARATION .......................................................... 3 CHARGING THE Ni-MH BATTERY PACK .................................. 3 INSTALLING/ REMOVING THE BATTERY PACK .............................. 5 INSTALLING THE ANTENNA ............................................... 6 INSTALLING THE BELT CLIP ..............................................
Résumé du contenu de la page N° 7
UNPACKING AND CHECKING EQUIPMENT Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. SUPPLIED ACCESSORIES Item Part Number Quantity K, M markets T90-1036-XX (TK-2202) K, M markets Antenna T90-1039-XX 1 (TK-3202) K2, M2 markets T90-1040-XX (TK-3202) BX attery charger W1 08-0969-X AC adaptor W1 08-09
Résumé du contenu de la page N° 8
Antenna: K, M Antenna: K, M Antenna: K2, M2 markets (TK-2202) markets (TK-3202) markets (TK-3202) Battery charger AC adaptor AC adaptor (K, K2 markets) (M, M2 markets) Ni-MH battery pack Speaker/ microphone (KNB-29N) jack cover Speaker/ microphone Belt clip Screw set locking bracket 2
Résumé du contenu de la page N° 9
PREPARATION CHARGING THE Ni-MH BATTERY PACK The battery pack is not charged at the factory; charge it before use. The initial charging of the battery pack after purchase or extended storage (greater than 2 months) will not bring the battery pack to its normal operating capacity. After repeating the charge/discharge cycle 2 or 3 times, the operating capacity will increase to normal. ◆ Do not recharge the battery pack if it is already fully charged. Doing so may cause the life of the battery pack
Résumé du contenu de la page N° 10
1 Plug the AC adaptor cable into the adaptor jack located on the rear of the charger. 2 Plug the AC adaptor into an AC outlet. 3 Slide the Ni-MH battery pack or transceiver with a NiMH battery pack into the charger. • Make sure the battery pack terminals are in contact with the charger terminals by aligning the grooves of the battery pack with the tabs of the charger. • The charger LED lights red and charging begins. 4 When charging is completed, the indicator lights green. Remove the battery p
Résumé du contenu de la page N° 11
INSTALLING/ REMOVING THE BATTERY PACK ◆ Do not short the battery terminals or dispose of the battery by fire. ◆ Never attempt to remove the casing from the battery pack. 1 Align the battery pack with the back of the transceiver, then press the battery pack and transceiver firmly together until the release latch on the base of the transceiver locks. 2 To remove the battery pack, lift the safety catch on the base of the transceiver, then press the release latch underneath the safety catch. 3 While
Résumé du contenu de la page N° 12
INSTALLING THE ANTENNA Screw the antenna into the connector on the top of the transceiver by Antenna holding the antenna at its base and turning it clockwise until secure. Note: The antenna is neither a handle, a key ring retainer, nor a speaker/ microphone attachment point. Using the antenna in these ways may damage the antenna and degrade your transceiver’s performance. INSTALLING THE BELT CLIP If necessary, attach the belt clip using the two supplied 3 x 8 mm screws. Note: If the belt clip
Résumé du contenu de la page N° 13
INSTALLING THE COVER OVER THE SPEAKER/ MICROPHONE JACKS If you are not using a speaker/ microphone, install the cover over the speaker/ microphone jacks using the supplied 3 x 6 mm screw. Note: To keep the transceiver water resistant, you must cover the speaker/ microphone jacks with the supplied cover. Speaker/ microphone jack cover INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE (OR HEADSET) 1 Insert the speaker/ microphone (or headset) plugs into the speaker/ microphone jacks. 2 Attach the locki
Résumé du contenu de la page N° 14
GETTING ACQUAINTED Channel selector Antenna Rotate to select channels 1 ~ 8. LED indicator Lights red while Power switch/ transmitting. Lights Volume control green while receiving Turn clockwise to a signal. Flashes switch ON the red when the battery transceiver. To voltage is low while switch OFF the transmitting. transceiver, turn counterclockwise until a click sounds. Rotate to adjust the volume level. Speaker Microphone PTT (Push-To- Talk) switch Press, then speak into the microphone to c
Résumé du contenu de la page N° 15
PROGRAMMABLE AUXILIARY FUNCTIONS Your dealer can program each of the Side 1 and Side 2 keys with one of the following auxiliary functions. Refer to their descriptions, starting on page 11. • Autodial • Key Lock • Key Lock (with Backup) • Monitor • Monitor Momentary • None (No function) (default setting for Side 1 key) • Scan • Scan + Temporary Delete • Scrambler • Squelch Off • Squelch Off Momentary (default setting for Side 2 key) •Temporary Delete 9
Résumé du contenu de la page N° 16
BASIC OPERATIONS 1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. •A beep sounds if enabled by 1 your dealer. 2 Press the key programmed with the Monitor or Squelch Off function to hear background 1 noise, then rotate the Power switch/ Volume control to adjust the volume. 3 Rotate the Channel selector to select your desired channel. • When you receive an appropriate signal, you will 1 hear audio from the speaker. 4 To make a call, press and hold the PTT switc
Résumé du contenu de la page N° 17
ADVANCED OPERATIONS The following functions are programmable by your dealer, as described on page 9. AUTODIAL Press and hold the PTT switch, then press the key programmed as Autodial to transmit the stored DTMF code. Release the Autodial key, then speak into the microphone while still pressing the PTT switch to call the other party. KEY LOCK Press and hold the key programmed as Key Lock for 1 second to lock/ unlock the transceiver keys. The following keys/ functions can still be used when Key L
Résumé du contenu de la page N° 18
MONITOR/ SQUELCH OFF You can use the key programmed as Monitor or Squelch Off to listen to weak signals that you cannot hear during normal operation, to deactivate channel signalling, and to adjust the volume when no signals are present on your selected channel. • Squelch Off: Momentarily press to hear background noise. Press the key again to return to normal operation. • Squelch Off Momentary: Press and hold to hear background noise. Release the key to return to normal operation. • Monitor:
Résumé du contenu de la page N° 19
SCAN Scan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. The transceiver will remain on a busy channel until the signal is no longer present. Your dealer programs the delay time between signal drop-out and Scan resumption. If a signal is received during the delay time, the transceiver will remain on the same channel. Note: You can only use Scan if your dealer has programme
Résumé du contenu de la page N° 20
■ Temporary Delete If a key is programmed with the Temporary Delete or Scan + Temporary Delete function, you can temporarily remove specific channels from the scanning sequence during Scan. When Scan stops at a channel, you can remove that channel from the scanning sequence by pressing and holding the key programmed as Temporary Delete or Scan + Temporary Delete for 1 second. •You cannot delete the Priority channel, if one has been set up. •You cannot delete a channel if there will be less than
Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
VHF FM TRANSCEIVER
TK-2202
UHF FM TRANSCEIVER
TK-3202
© B62-1762-00 (K,K2,M,M2)
09 08 07 06 05 04 03 02 01 00
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
THANK YOU We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. MODELS COVERED BY THIS MANUAL TK-2202: 8-channel VHF FM Transceiver TK-3202: 8-channel UHF FM Transceiver NOTICES
