Instruction d'utilisation Audio-Technica ES915SC

Résumé du contenu de la page N° 1

ES915SC

®
engineered sound microphones
Cardioid Condenser Gooseneck Microphones with Mute Switch/LED
®
off (via integral 80 Hz high-pass UniSteep filter) to help control undesired
ambient noise. A mute switch in the base lights when the mic is “on.”
The mute switch is designed to operate quietly without any mechanical
noise.
The microphone comes equipped with a two-stage foam windscreen,
a low-profile isolation mount, and a stand clamp to permit attaching
5 3
the microphone to a standard

Résumé du contenu de la page N° 2

257 ES915SC hole and is less likely to damage the table surface.) Specifications 1 5. Using a 1.5 mm ( /16") drill bit, drill three pilot holes for the mounting Element Fixed-charge back plate, permanently screws. (If mounting below the table surface, be certain NOT to drill polarized condenser pilot holes through the table.) Polar pattern Cardioid 6. Place the AT8474 mount over the hole and partially tighten the Frequency response 30-20,000 Hz three screws. Then place the microphone in